Omega Diver 300M CO-AXIAL Bruksanvisning

Omega Titta Diver 300M CO-AXIAL

Läs gratis den bruksanvisning för Omega Diver 300M CO-AXIAL (2 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 12 recensioner. Har du en fråga om Omega Diver 300M CO-AXIAL eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1 / 2
SEAMASTER
DIVER 300 M CO-AXIAL 41 MM
Steel on steel
Caliber
2500
212.30.41.20.01.002
V
l
Automatic
U
Chronometer
o
Sapphire crystal
r
Anti-reflective treatment
d
Screw-in crown
q
Helium escape valve
G
3-year International Warranty
s
Water-Resistant to a relative pressure of 30 bar
(300 metres/1000 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 48 hours or more, wind it
up with the crown in position 1.
2. Correcting the date: pull the crown out to position 2, turn the crown
backwards, then push the crown back to position 1.
NB: date-setting is not recommended between 8 pm and 2 am.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
2 / 2
HELIUM ESCAPE VALVE
How to use the helium escape valve? (fig. 2)
In its normal position (fig. 2.1), the OMEGA helium escape valve is perfectly
watertight thanks to the gaskets (B), but it is not functional, since it is screwed
down.
During the decompression phase, unscrew the crown of the valve in order to
release the mechanism (fig. 2.2). The valve is now watertight from the outside.
As the interior pressure becomes greater than the exterior pressure, it pushes the
gasket (A) out of its seating, thus releasing the gas (fig. 2.3). Once the pressure is
equalised, gasket (A) returns to its original position, pushed by the spring (C) (fig.
2.2).
This operation is automatically repeated several times during the decompression
phase. Once atmospheric pressure is reached, screw down the crown of the valve
(fig. 2.1).
Note: Even if the valve is unscrewed, and we strongly recommend that the valve
remains screwed down whenever the watch is immersed in water, the watch is still
water-resistant to a relative pressure of 5 Bar (50 metres). However, complete
water-resistance to the dial depth can only be achieved with gasket (B) and the
valve in the screwed down position.

Produktspecifikationer

Varumärke: Omega
Kategori: Titta
Modell: Diver 300M CO-AXIAL
Färg på produkten: Zwart
Vikt: 1400 g
Bredd: 79 mm
Djup: 91 mm
Höjd: 358.2 mm
Typ av klocka: Armbandsur
Anslutningsteknik: Bedraad
Kronometer: Ja
Vattentät: Ja
Klockläge: 12 timmar
Typ av kalender: Datum
Urtavlans huvudfärg: Svart
Strömförbrukning (i standby): 1.3 W
DC-spänningsingång: 31 V
Energireserv: 48 h
Anslutning för nätadapter: Ja
Material: Staal
Avsedd för: Optreden/podium
Ljudutgångskanaler: 1.0 kanalen
Frekvensomfång: 40 - 16000 Hz
Signal-brusförhållande: 100 dB
Total harmonisk distorsion (THD): 1 procent
Strömförbrukning (typiskt): 150 W
Toppeffekt per kanal: 40 W
Skruvkrona: Ja
Förstärkarklass: D
Typ av urtavla: Analog urtavla
Kalender: Ja
Boettmaterial: Silver
bandmaterial: Stål
Mekanism typ: Mechanical (auto winding), Mechanical (hand winding)
Vattentäthet till ett djup på: 300 m
Höljefärg: Silver
Armbandets huvudfärg: Silver
Klockglas typ: Kristall
Utformning: Rund
Boettdiameter: 41 mm
Stöttålig: Ja
Vattentäthet till ett tryck på: 30 ATM
Färg på urtavlans markeringar: Vit
Könstyp: Hankoppling
Tillverkare av urverk: Omega
Urverkets modell: 2500
Koaxiellt hämverk: Ja
Repskyddsbehandlat glas: Ja
Reflexdämpande ytskikt: Ja
Heliumventil: Ja

Behöver du hjälp?

Om du behöver hjälp med Omega Diver 300M CO-AXIAL ställ en fråga nedan och andra användare kommer att svara dig