Omega Speedmaster Mark II Bruksanvisning

Läs gratis den bruksanvisning för Omega Speedmaster Mark II (2 sidor) i kategorin Titta. Guiden har ansetts hjälpsam av 38 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 3 recensioner. Har du en fråga om Omega Speedmaster Mark II eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1 / 2

SPEEDMASTER

MARK II CO-AXIAL CHRONOGRAPH 42.4 X 46.2MM

Steel on steel

Caliber

3330

327.10.43.50.06.001

V

Co-Axial escapement

]

Si14 silicon balance spring

l

Automatic

U

Chronometer

Z

Tachymeter

o

Sapphire crystal

t

Anti-reflective treatment on both sides

F

4-year International Warranty

T

Water-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 2 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 45 hours or more, wind it

up with the crown in position 1.

2. Time setting: hours – minutes – seconds. Pull the crown out to position 2. The

seconds hand will stop. Turn the crown forwards or backwards. Synchronise the

seconds by pushing the crown back to position 1 to coincide with a given time

signal.

Correcting the date:press the corrector (C) positioned at 10 o’clock.

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Produktspecifikationer