Onkyo TX-L5 Bruksanvisning

Onkyo mottagare TX-L5

Läs nedan 📖 manual på svenska för Onkyo TX-L5 (40 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

AV Receiver

TX-L5

Instruction Manual

Thank you for purchasing the Onkyo AV Receiver.

Please read this manual thoroughly before making

connections and turning on the power.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new AV Receiver.

Please retain this manual for future reference.

Contents

Getting started

Before Using Your AV Receiver 2

Other

Enjoying Surround mode/

Recording

Enjoying music or videos

Turning on the AV Receiver/

Speaker Setup

1. Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions

should be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should

be followed.

5. Cleaning – Unplug the appliance from the wall outlet before

cleaning. The appliance should be cleaned only as

recommended by the manufacturer.

6. Attachments – Do not use attachments not recommended by

the appliance manufacturer as they may cause hazards.

7. Water and Moisture – Do not use the appliance near water –for

example, near a bath tub, wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories – Do not place the appliance on an unstable cart,

stand, tripod, bracket, or table. The appliance may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the appliance.

Any mounting of the appliance should follow the manufacturer’s

instructions, and should use a mounting accessory

recommended by the manufacturer.

9. An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

10.Ventilation – Slots and openings in

the cabinet are provided for

ventilation and to ensure reliable

operation of the appliance and to protect it from overheating, and

these openings must not be blocked or covered. The openings

should never be blocked by placing the appliance on a bed, sofa,

rug, or other similar surface. The appliance should not be placed

in a built-in installation such as a bookcase or rack unless proper

ventilation is provided. There should be free space of at least 20

cm (8 in.) and an opening behind the appliance.

11.Power Sources – The appliance should be operated only from

the type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, consult

your appliance dealer or local power company.

12.Grounding or Polarization – The appliance may be equipped

with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug will fit into the power outlet

only one way. This is a safety feature. If you are unable to insert

the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polarized

plug.

13.Power-Cord Protection – Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords

at plugs, convenience receptacles, and the point where they exit

from the appliance.

14.Outdoor Antenna Grounding – If an outside antenna or cable

system is connected to the appliance, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna-discharge

unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for

the grounding electrode. See Figure 1.

15.Lightning – For added protection for the appliance during a

lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the

appliance due to lightning and power-line surges.

16.Power Lines – An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

17.Overloading – Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire

or electric shock.

18.Object and Liquid Entry – Never push objects of any kind into

the appliance through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the appliance.

19.Servicing – Do not attempt to service the appliance yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service

personnel.

20.Damage Requiring Service – Unplug the appliance form the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the

appliance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the appliance to its normal operation,

E. If the appliance has been dropped or damaged in any way,

and

F. When the appliance exhibits a distinct change in performance

– this indicates a need for service.

Important Safeguards

PORTABLE CART WARNING

S3125A

WARNING:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated dangerous voltage“ ” within

the product s enclosure that may be of’

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

■For British models

Replacement and mounting of an AC plug on the power supply cord

of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals

in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

IMPORTANT

A 5 ampere fuse is fitted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or BSI to BS1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE

REMOVED AND THE PLUG CUT OFF AND DISPOSED OF

SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK

IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE

SOCKET.

If in any doubt, consult a qualified electrician.

Precautions

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE–

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

S2898A

21.Replacement Parts – When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22.Safety Check – Upon completion of any service or repairs to the

appliance, ask the service technician to perform safety checks to

determine that the appliance is in proper operation condition.

23.Wall or Ceiling Mounting – The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

24.Heat – The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

■For U.S. models

Note to CATV system installer:

This reminder is provided to call the CATV system installer's

attention to Section 820-40 of the NEC which provides guidelines for

proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

FCC Information for User

CAUTION:

The user changes or modifications not expressly approved by the

party responsible for compliance could void the user s authority to’

operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for

help.

■For Canadian models

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

■Modele pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B

EST CON-FORME LA NORME NMB-003 DU CANADA.À

Sur les mod les dont la fiche est polarisè ée:

ATTENTION: POUR LECTRIQUES,ÉVITER LES CHOCS É

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

GERMERING, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

Produktspecifikationer

Varumärke:	Onkyo
Kategori:	mottagare
Modell:	TX-L5
Färg på produkten:	Black, Stainless steel
Vattennivåindikator:	Ja
Husmaterial:	Roestvrijstaal
Tillgångar:	3000 W
På / Av knapp:	Ja
Vattentankens kapacitet:	1.7 l
Automatisk avstängning:	Ja
Sladdförvaring:	Ja
Dolt värmeelement:	Ja
Justerbar termostat:	Nee
Antihalkfötter:	Ja
Filtrering:	Ja
Trådlös:	Ja
Bas med 360 graders rotationsvinkel:	Ja
Belyst på/av-knapp:	Ja