Optex OT-3 Bruksanvisning


Läs gratis den bruksanvisning för Optex OT-3 (1 sidor) i kategorin Deur-/ramsensor. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9 recensioner. Har du en fråga om Optex OT-3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
OT-3
ENGLISH
Model
Cover color
Output
IP rate
Weight
Accessories
Silver (aluminium)
Normally open 24VDC Max.5mA / 15VDC Max.20mA (resistance load)
IP 55
90g(3.2oz)
2 Mounting screws , 1 Mounting template , 1 Operation manual
NOTE
The specifications herein are subject to change without prior notice due to improvements.
.Take Care of Environment This manual uses recycled paper.
41.5 (1 5/8")
11 (7/11")
192 (7 9/16")
Mounting Pitch=130(5 1/8")
[ mm (inch)]
1. Only use this product as specified in the operation manual provided.
2. Do not wash the product with water.
3. Do not disassemble, rebuild or repair the product yourself , otherwise electric shock may occur.
4. Do not use the product for safety / emergency switch.
1. Drill two mounting holes of ø3.4mm (ø1/8).
2. If wiring is to be concealed ,drill a distribution hole of ø5mm (ø3/16).
3. Remove the cover and fix the push button with the screws.
4. Put back the cover on the push button.
5. Attach the cover with the screw.
Mounting screws
5915023 JUL 2009
MANUFACTURER'S STATEMENT
SPECIFICATIONS
OUTER DIMENSIONS
Mounting holes
Cover
Push button
41(1 5/8")
OPTEX Technologies B.V.
Distribution hole
eu
eu
Henricuskade 17, 2497 NB, The Hague


Produktspecifikationer

Varumärke: Optex
Kategori: Deur-/ramsensor
Modell: OT-3

Behöver du hjälp?

Om du behöver hjälp med Optex OT-3 ställ en fråga nedan och andra användare kommer att svara dig




Deur-/ramsensor Optex Manualer

Deur-/ramsensor Manualer

Nyaste Deur-/ramsensor Manualer