OSD Audio SS2V70-200W Bruksanvisning


Läs gratis den bruksanvisning för OSD Audio SS2V70-200W (23 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10 recensioner. Har du en fråga om OSD Audio SS2V70-200W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/23
SS2V70-200W
2 ZONE 70 VOLT
SPEAKER SELECTOR
The SS2V70-200W is a unique 70V Speaker Selector featuring…
2 independent Zones each controlled by a 200 Watt 70V Mono Volume Control featuring a Rotary Style Knob. Each zone
has On/Off switch as well. The unit has a single 2 conductor input and direct pass through allowing to stack additional
SS2V70 Speaker selectors only limited by your application. Standard 70V rules apply to the number of speakers used per
zone, matching the available power from the 70V amplier.
Specications
Power Handling: 200 Watts Per Channel/Zone Mono Single Channel
Frequency Response: 20Hz-22KHz (+0 dB, -0 dB)
Selector Type: Noise-Free, front access On/Off Pushbutton and Rotary Knob
Steps: 33 dB, 10 steps plus full off (step 11)
Connection Type: Removable Input/output Connectors
Wire Size Acceptance: 16 Gauge 2 Conductor
Amplier Protection: 70V Mono only No Impedance Protection Needed
Weight: 3.6 lbs
Dimensions: (WxHxD) 5.5 x 2.25 x 6.25”
Note #1: The Zone 1 & 2 On/Off button allows you to turn each zone off
independently of the volume knob
Note #2: The Thru output comes directly from the Input, it does not go
through the transformer allowing you to stack multiple SS2V70.
Front Panel
1. Zone 1 On/Off Switch
2. Zone 1 Volume Knob
3. Zone 2 On/Off Switch
4. Zone 2 Volume Knob
Rear Panel
1. Zone 2 Speaker Output
2. Zone 1 Speaker Output
3. Input From Amplier
4. Straight Thru Output
1
1
2
2
4
4
3
3


Produktspecifikationer

Varumärke: OSD Audio
Kategori: Inte kategoriserad
Modell: SS2V70-200W

Behöver du hjälp?

Om du behöver hjälp med OSD Audio SS2V70-200W ställ en fråga nedan och andra användare kommer att svara dig