Ozito PCS-254 Bruksanvisning

Ozito Sågmaskin PCS-254

Läs nedan 📖 manual på svenska för Ozito PCS-254 (9 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/9

BRAKE OFF

RUN

PCS-254

5. Pull out the choke. (fully

withdrawn).

2. Remove the chain bar BLACK

oil cap and fill the tank to about

80% of its capacity with chain

bar oil. Chain bar oil tank capacity

160ml. Fasten the oil tank cap

and clean any spillage.

9. When ready to start cutting,

release the brake by pulling the

chain brake firmly towards the

rear of the chainsaw.

1. Place chainsaw on its side.

Remove the fuel tank cap RED

and fill the fuel tank up to the

filler neck with the fuel mix. Fuel

tank capacity 230ml. Fasten the

fuel tank cap and clean any

spillage.

3. For safety reasons, make sure

the brake is ON when starting. To

apply the brake, push the chain

brake forward.

8. Push in the choke. Now pull

the recoil starter several times

until the engine starts.

7. Hold the tool firmly on the

ground and pull out the recoil

starter until you feel it start to

resist. Pull firmly on the recoil

starter until it fires.

6. Press the priming bulb 10

times to push fuel into the

carburettor.

4. Move the ignition switch to the

“I” ON position.

BRAKE ON

START

2 Stroke

Oil

40:1

PETROL

CHAINSAW

25.4cc - 254mm (10”)

INSTRUCTION MANUAL

SPECIFICATIONS

Engine: 25.4cc 2 Stroke

Power: 0.7 kW

Bar: 254mm (10”)

Max. Cutting Capacity: 200mm (8”)

Chain Pitch: 9.525mm (3/8”)

No Load Speed: 11,000/min

Chain Speed: 21 m/s

Fuel Mix 40:1

Fuel Tank Capacity: 230ml

Chain Oil Tank Capacity: 160ml

Tool Weight: 3.8 kg

PCS-254

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

1 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 12 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example:

filters, spark plugs, chains and included accessories.

WARNING

The following actions will result in the warranty being void.

• Professional, Industrial or high frequency use.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

Petrol Chainsaw

Chain Bar Cover

Fuel Mixing Bottle

Spark Plug Wrench

Hex Key

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. Side Cover

2. Choke Control

3. Throttle Safety Release

4. Throttle Trigger

5. Ignition Switch

6. Chain Drive Cover Nuts

7. Chain Tension Screw

8. Chain

9. Guide Bar

1. ADJUSTING THE CHAIN TENSION

PETROL CHAINSAW

ACCESSORIES

10 11 12 13 14 15 16 17 18

2 3 4 5 6 7 8 9 Note: Proper tension of the chain is extremely important and

must be checked before starting, as well as during any cutting

operation. Taking the time to make adjustments to the chain

will result in improved cutting performance and prolonged

chain life.

Correct tension

For the correct chain tension, pull up

on the chain from the top and middle

of the exposed guide bar. The

bottom tip of the links should only

just stay in the track.

Adjusting tension

1. Loosen, but do not remove

the chain drive cover nut.

2. Adjustment chain tension

screw CLOCKWISE

to increase chain

tension. Turning screw

COUNTERCLOCKWISE will

decrease amount of tension

on the chain. Adjust the

chain tension screw for the

correct tension.

3. After making the

adjustment, tighten the

chain drive cover nut

securely.

WARNING! WEAR PROTECTIVE GLOVES AT ALL

TIMES WHEN HANDLING THE CHAIN.

WARNING! RECHECK THE TENSION AFTER A

FEW MINUTES OF CUTTING AS THE CHAIN MAY

STRETCH AFTER INITIAL USE. A LOOSE CHAIN MAY

CAUSE WEAR TO BOTH THE CHAIN AND THE GUIDE

BAR AND BECOME A MAJOR SAFETY HAZARD.

3mm gap is the

ideal tension

10. Bucking Spikes

11. Chain Bar Oil Cap

12. Chain Brake

13. Fuel Tank Cap

14. Priming Bulb

15. Rear Handle

16. Handle

17. Recoil Starter

18. Filter Cover Screw

19. Fuel Mixing Bottle

20. Hex Key

21. Spark Plug Wrench

22. Chain Bar Cover

19 20 21 22

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Sågmaskin
Modell:	PCS-254

Behöver du hjälp?

Om du behöver hjälp med Ozito PCS-254 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Sågmaskin Ozito Manualer

Ozito PXBCS-1830 Bruksanvisning

24 December 2024

Ozito ECS-406A Bruksanvisning

6 Oktober 2024

Ozito PXCCSK-4182 Bruksanvisning

25 September 2024

Ozito PXBPCK-1825 Bruksanvisning

25 September 2024

Ozito PXTCSK-2520 Bruksanvisning

25 September 2024

Ozito PXPRSS-018 Bruksanvisning

25 September 2024

Ozito PXBPCS-1815 Bruksanvisning

25 September 2024

Ozito OCS-018 Bruksanvisning

21 September 2024

Ozito JSW-6100U Bruksanvisning

10 September 2024

Ozito RSW-5200 Bruksanvisning

6 September 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Bavaria By Einhell BHS 66 Bruksanvisning

3 April 2025

Bavaria By Einhell BPS 600 E Bruksanvisning

3 April 2025

Makita DPC6430 Bruksanvisning

1 April 2025

Makita DCS4610 Bruksanvisning

1 April 2025

Makita DCS431 Bruksanvisning

1 April 2025

Makita DCS430 Bruksanvisning

1 April 2025

Makita EK6101 Bruksanvisning

1 April 2025

Makita DCS6401 Bruksanvisning

1 April 2025

Kraftronic KT-ST 550 Bruksanvisning

29 Mars 2025

Kraftronic KT-US 650 Bruksanvisning

29 Mars 2025