Ozito PXCSS-500 Bruksanvisning

Ozito Sågmaskin PXCSS-500

Läs nedan 📖 manual på svenska för Ozito PXCSS-500 (6 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

SPECIFICATIONS

Voltage: 18V

No Load Speed: 4,200/min

Blade Diameter: 150mm (6”)

Blade Bore: 10mm

Depth of Cut: 48mm @ 90°

32mm @ 45°

Weight: 2.4kg

CORDLESS

CIRCULAR SAW

INSTRUCTION MANUAL

ozito.com.au

STANDARD EQUIPMENT

Circular Saw

Hex Key

Rip Fence

PXCSS-500

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0219

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: cutting blades.

KNOW YOUR PRODUCT

1. FITTING THE BATTERY & GUIDE

SETUP & PREPARATION

CORDLESS CIRCULAR SAW

10 11 12 14 1513

2 3 4 5 6 7 8 9

1 Battery Seating

2 Rear Handle

3 Dust Port

4 On/Off Trigger

5 Lock-Off Lever

6 Hex Key Holder

7 Front Handle

8 Bevel Locking Knob

9 Rip Fence Locking Knob

10 Depth Locking Lever

11 Blade Guard Lever

12 Lower Blade Guard

13 Blade

14 Upper Blade Guard

15 Cutting Guide Notch

Inserting & Removing the Battery

1 Slide the battery into the seating

at the back of the saw until it

clicks into place.

2 To remove, press and

hold the battery release

tab and then slide out.

The rip fence allows you to perform straight cuts with ease.

Attaching the Rip Fence

2 Once the desired

width is set, tighten

the locking knob to

secure in place.

1 Insert the rip fence through the

rip fence slots in the front of the

baseplate.

3 To remove, loosen the locking

knob and then slide the rip fence

out.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER

This tool is compatible with all battery and chargers from the Ozito

Power X Change Range.

For optimal performance, we recommend the use of a 3.0Ah battery or

higher to operate this Power X Change Circular Saw.

3. CONTROLS2. DEPTH & BEVEL ADJUSTMENT

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

THE BATTERY IS REMOVED BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

WARNING! AFTER USE, HOLD THE SAW AWAY FROM

YOUR BODY UNTIL THE BLADE STOPS COMPLETELY.

OPERATION

Depth Adjustment

Bevel Adjustment

3 Tighten depth

adjustment knob to

secure in place.

1 Loosen the depth adjustment

lever.

1 Loosen bevel adjustment knob.

3 Tighten the bevel adjustment

knob.

2 Hold the baseplate down with

one hand. Raise or lower the saw

to the desired depth.

2 Align baseplate to desired angle

on bevel scale.

Depth should be adjusted so that no more than one tooth is protruding

through the timber. This helps to minimise splintering.

Turning On and Off

2 Squeeze the on/off

trigger to start the

saw.

Note: Allow the saw to reach full speed before beginning a cut.

1 Press and hold the lock-off level

in either direction.

3 To stop the saw, release the on/

off trigger.

The cutting guide will give an approximate line of cut. For a straight cut, use

the 0° notch. For a 45° cut, use the 45° notch. For higher accuracy, use the rip

fence provided.

Cutting Guide Notch

o45o

Produktspecifikationer

Varumärke:	Ozito
Kategori:	Sågmaskin
Modell:	PXCSS-500
Färg på produkten:	Roestvrijstaal
Certifiering:	CSA (C22.2 No. 65-13)
Material:	Cooper, Tinplate
Hållbarhetscertifikat:	RoHS
Antal per paket:	20 stuk(s)
Kontaktledarmaterial:	Koper
Striplengte:	36.5 mm
Numrering:	11
Antal-spår:	1