PAC GM1A-RT Bruksanvisning
PAC
Inte kategoriserad
GM1A-RT
Läs gratis den bruksanvisning för PAC GM1A-RT (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om PAC GM1A-RT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
GM1A-RT
Radio Replacement Interface with
Telematics Retention
for select General Motors Vehicles
with Class II Data-Bus
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Rev: V6
Date: 0 18927
Page 1
Important Notes
Module Layout
Programming Button
USB PortInterface Connector 4
Adjustment Dial
Interface Connector 1
Expansion Port
Interface Connector 2
The GM1A-RT interface allows the replacement of a factory radio in select General Motors vehicles with the Class II Data-Bus.
Using this interface will retain factory features such as OnStar, warning chimes and the factory Bose amplier when the original
radio is removed. The GM1A-RT provides data bus driven outputs such as retained accessory power (RAP), vehicle speed signal
(VSS), illumination, reverse trigger and parking brake. The GM1A-RT also provides an SWI Direct output for adding an optional
PAC Steering Wheel Control (SWC) retention interface (SWI-RC or SWI-CP2). Rear Seat Controls (RSC) if equipped will also
be retained with the SWI interface. You can also add multiple camera inputs to your aftermarket radio with Data-Bus controlled
automatic activation (front camera only) by connecting a VS41 into the expansion port on the GM1A-RT.
Introduction and Features
1. The included chime speaker should be used when: The vehicle has a standard Bose system (UQ7), the vehicle does not have
a factory amplier at all, or if you are connecting an aftermarket amplier to the cabin speakers.
2. The Programming Button and Adjustment Dial on the side of the interface have multiple functions. Please see Page 3 for
more details.
3. Compatible in both Premium Bose (Y91 / UQA) and Standard Bose systems.
4. Real time speaker fading on Premium factory amplied systems (UQA / Y91) is only supported with the “amplied output”
connection of the GM1A-RT.
5. When using real time speaker fading (Premium Bose only), if the fader setting is biased more to the front or rear, as the radio
turns on the sound may begin at the default setting and then quickly transition to your custom setting.
6. Aftermarket radio features such as High Pass Filters (crossovers), DSP or “Network Mode” will interfere with proper fader
function (Premium Bose Only). In order for the GM1A-RT’s fader function to work, the audio from the aftermarket radio’s
output must match so it can compare the front and rear audio levels and determine the proper fader setting for the factory
amplier.
7. When used in conjunction with the add on camera controller (VS41) the GM1A-RT will only provide Data-Bus controlled
automatic activation for the front camera. Please refer to the vehicle specic VS41 instructions for more detail.
Interface Connector 3
Non-Amplied
Audio Output
LED 1
LED 2
Amplied
Audio Output
Produktspecifikationer
| Varumärke: | PAC |
| Kategori: | Inte kategoriserad |
| Modell: | GM1A-RT |
Behöver du hjälp?
Om du behöver hjälp med PAC GM1A-RT ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad PAC Manualer
10 Mars 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
19 Februari 2025
12 Februari 2025
12 Februari 2025
Inte kategoriserad Manualer
- Foppapedretti
- 909 Outdoor
- Luxman
- Sortimo
- PSSO
- Adax
- Chauvet
- Izzy
- Bunn
- YA-MAN
- SMS
- General
- NUX
- Core SWX
- Eheim
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025