PAC MCI-GM53 Bruksanvisning


Läs gratis den bruksanvisning för PAC MCI-GM53 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 9.5 recensioner. Har du en fråga om PAC MCI-GM53 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Multi Camera Input Interface
for select General Motors Vehicles
© 2019 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
C
Page 1
Rev. V2
Date: 072419
MCI-GM53
with the 7 screen.
Introduction and Features
Important Notes
1. Compatible build code: IOB. Incompatible build codes: IOA, IO4, IO5, and IO6 . Build codes can be found on a silver sticker either in
the glove box or by scanning the QR code in the driver door frame.
2. If you change the DIP switch settings, you must disconnect and reconnect power for the change to take e󰀨ect.
3. It is very important that you make all connections with the key in the o󰀨 position. Failure to do so will result in the factory
touchscreen becoming unresponsive. If you do make the connections with the key on, you must turn the vehicle o󰀨, shut all doors, and
leave it alone for 5 minutes. After 5 minutes, turn the key back on, and the interface should operate as intended.
4. If you are installing this interface strictly to add a reverse camera, please note that the blind spot inputs will need to be disabled by
entering the menu and manually disabling the inputs (see page 3, step 3 for details).
Whats Included
Number Description Replacement Part Number
1 Module MCI-GM53
2 Mounting Bracket GMSWRBRKT
3 Video Input Harness BSM2-CEH
4 VBM Harness BSM1-TMON-HAR V2
5 Power Harness BSM2-PTH
6 LVDS Harness BSM1-LVDS
7
Foam Padding/
Mounting Screws
Miscellaneous


Produktspecifikationer

Varumärke: PAC
Kategori: Inte kategoriserad
Modell: MCI-GM53

Behöver du hjälp?

Om du behöver hjälp med PAC MCI-GM53 ställ en fråga nedan och andra användare kommer att svara dig