PCE Instruments PCE-ALC 10 Bruksanvisning
PCE Instruments
alkohol testare
PCE-ALC 10
Läs gratis den bruksanvisning för PCE Instruments PCE-ALC 10 (5 sidor) i kategorin alkohol testare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om PCE Instruments PCE-ALC 10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
User manuals in various languages (français, italiano, español, português, nederlands,
türk, polski) can be found via our product search on:
www.pce-instruments.com
PCE-ALC 10
USER MANUAL
ENGLISH
ALCOHOL-TESTER
2
Thank you for choosing PCE-ALC 10. By reading this manual, you can have a comprehensive understanding
of the use of PCE-ALC 10, and its complete functions and simple operation.
The features of PCE-ALC 10 are as follows:
»compact gas path design, high-precision sampling systems, instrumentation and advanced circuit
design algorithm to ensure rapid, accurate and stable test result.
»Active Mode and passive test mode, just blow the air into the tube, clean and hygienic, convenient for
the tester to use. Small and easy to carry
»1.44 inch 128*128TFT color display, making the detection intuitive and eective
»Pay attention to all the CAUTION after mark to avoid any misoperation deviation and damage.
»Please don‘t try to open the instrument and repair it without technician’s instruction.
1 - LCD Screen
2 - Inlet Port
3 - USB Port
4 - Power Button
INTRODUCTION
SAFETY AND PRECAUTIONS
DEVICE DESCRIPTION
3
Heating
7
09:38
Blow
7
09:38
Detecting...
09:38
0.150
%
09:38 0005
0.036
%
09:38 0005
0.000
%
09:38 0005
Warming Up
Drunk
Please blow
Drinking
Detecting
No drinking
Startup and Shut Down
»Startup: Press the Power button for 5 seconds till it beeps. The screen lights up and comes to a stand
interface. Press the Power button again, the device will come to the test interface.
»Shut Down: Press the Power button for 5 seconds till the screen turn o.
Test Operation
»Install the mouthpiece to the top of PCE-ALC 10. Long Press the power button to turn on the device.
»The device needs 10 seconds for warming-up after turning on. After the warm-up is completed, take a
deep breath and blow at a constant speed into the mouthpiece.
»After blowing for about 3 ... 5 seconds, the test result will be displayed on the screen.
Note
»When entering the blowing mode, if the machine is not operated for a long time, it will be automatically
detected as 0.
»The color of the screen will change depending on the test result value. For example, if the value is less
than 0.020 %BAC, the screen displays in green(no drinking):, the value is between 0.020 %BAC and
0.080 %BAC, and the screen displays in yellow(drinking): If the value is higher than or equal to 0.080
%BAC, the screen will display in red(drunk).
OPERATING INSTRUCTIONS
Produktspecifikationer
| Varumärke: | PCE Instruments |
| Kategori: | alkohol testare |
| Modell: | PCE-ALC 10 |
Behöver du hjälp?
Om du behöver hjälp med PCE Instruments PCE-ALC 10 ställ en fråga nedan och andra användare kommer att svara dig
alkohol testare PCE Instruments Manualer
23 Augusti 2025
23 Augusti 2025
alkohol testare Manualer
Nyaste alkohol testare Manualer
1 Juni 2025