Peerless-AV KIL646-EUK Bruksanvisning
Peerless-AV
Inte kategoriserad
KIL646-EUK
Läs gratis den bruksanvisning för Peerless-AV KIL646-EUK (20 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4.5 recensioner. Har du en fråga om Peerless-AV KIL646-EUK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
1
2013-09-20 #:150-9009-1
ENG
BLACK
KIL640
KIL642
KIL646
KIL647
SILVER
KIL640-S
KIL642-S
KIL646-S
KIL647-S
2
2013-09-20 #:150-9009-1
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. This product is designed to be installed on wood stud, solid concrete or cinder
block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing
make sure the supporting surface will support the combined load of the equipment and hardware. Screws must
be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the
Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product
failure or personal injury. To reduce the risk of electric shock or re, do not expose product to water or moisture.
Be sure power cord is routed so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid
overloading electrical outlets or extension cords. Always disconnect the power cord from the power outlet
when installing, servicing, or not using the product for an extended period of time. Do not block ventilation
slots or fan exhaust on product. Blocking airow could damage product. Arrange product to allow air to ow
freely around product. Keep product away from direct sunlight or any source of heat. For support please call
800-4-SIGNAGE.
WARNING
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least three
full turns and t snug.
ENG
Do not overtighten screws.
ENG
1
2
ENG
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
3
2013-09-20 #:150-9009-1
Tools Needed for Assembly.
ENG
5/16"
(8mm)
5/32"
(4mm)
3/8"
(10mm)
Produktspecifikationer
| Varumärke: | Peerless-AV |
| Kategori: | Inte kategoriserad |
| Modell: | KIL646-EUK |
Behöver du hjälp?
Om du behöver hjälp med Peerless-AV KIL646-EUK ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Peerless-AV Manualer
2 April 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
29 Januari 2025
29 Januari 2025
27 December 2024
27 December 2024
27 December 2024
Inte kategoriserad Manualer
- Extralife Instruments
- T4E
- Hurricane
- Absima
- Renkforce
- B.E.G.
- Truetone
- IMG Stageline
- DIO
- Schertler
- Soundmaster
- Foxconn
- Schaudt
- Orbis
- Vertex
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025