Peerless KIL743-EUK Bruksanvisning
Peerless
Inte kategoriserad
KIL743-EUK
Läs gratis den bruksanvisning för Peerless KIL743-EUK (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 6.5 recensioner. Har du en fråga om Peerless KIL743-EUK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
12015-04-28 #:150-9054-3 (2017-07-12)
ENG
22015-04-28 #:150-9054-3 (2017-07-12)
Symbols
ENG
WARNING
ENG
x3
Screws must get at least three
full turns and t snug.
ENG
Do not overtighten screws.
ENG
ENG - This product is designed to be installed on wood stud. Hardware is included for wood stud installation.
Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Screws must be tightly secured. Do not overtighten screws or damage can occur
and product may fail. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product failure
or personal injury. To reduce the risk of electric shock or re, do not expose product to water or moisture. Be sure
power cord is routed so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid overloading
electrical outlets or extension cords. Always disconnect the power cord from the power outlet when installing,
servicing, or not using the product for an extended period of time. Do not block ventilation slots or fan exhaust
on product. Blocking airow could damage product. Arrange product to allow air to ow freely around product.
Keep product away from direct sunlight or any source of heat. For support please call 800-4-SIGNAGE.
WARNING
32015-04-28 #:150-9054-3 (2017-07-12)
Tools Needed for Assembly.
ENG
5/32"
(4mm)
3/8"
(10mm)
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
Produktspecifikationer
| Varumärke: | Peerless |
| Kategori: | Inte kategoriserad |
| Modell: | KIL743-EUK |
Behöver du hjälp?
Om du behöver hjälp med Peerless KIL743-EUK ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Peerless Manualer
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
Inte kategoriserad Manualer
- B-Speech
- Rexing
- Elba
- Seville Classics
- DoughXpress
- Master
- Datalogic
- Nxg
- Strymon
- Speed-Link
- Bison
- BeamZ
- Puls Dimension
- Now TV
- Medeli
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025