Phottix Odin II Bruksanvisning
Phottix
Fjärrutlösare
Odin II
Läs gratis den bruksanvisning för Phottix Odin II (15 sidor) i kategorin Fjärrutlösare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Phottix Odin II eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
Odin II TTL Flash Trigger for Canon
Thank you for purchasing a Phottix product
Note: Before using the Odin II TTL Flash Trigger for Canon, please read this
instruction manual carefully.
Odin II TTL Flash Trigger is a new generation of TTL triggering system based on the
previous Odin TTL Flash Trigger. While keeping the Odin system’s core functions
such as of wireless power level adjustment, zoom adjustment and etc, the new system
has been added with a series of innovative functions to extend its utility and stability,
including group/channel/ID settings, AF assist light, wireless modeling light
brightness control. A whole new structural design allows for easier and faster to
operation.
Many TTL flashes have been tested but the manufacturer cannot guarantee that all
third party TTL flashes will function properly with the Phottix Odin II. It is designed
and optimized for Canon Flashes using the ETTL II/ETTL system.
Please Note:
1. After turning on the Phottix Odin II transmitter and receivers, slave mode does
not need to be set on flashes on Photix Odin II receivers, but flashes need to be set
in ETTL mode.
2. Ensure there is a good hot shoe connection between the transmitter and camera,
flashes and receivers for best performance.
3. Many TTL flashes have been tested but the manufacture cannot guarantee that all
third party TTL flashes will function properly with the Phottix Odin II. It has been
designed and optimized for original canon flashes using the ETTL II/ETTL system.
4. Turn of all devices-flashes/strobes, camera, and the Phottix Odin II transmitter
and receivers when connecting and disconnecting the devices.
FCC Interference Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The product is classified as Class 3R laser product,
according to the following standards IEC/EN
60825-1 "Radiation Safety of Laser Products."
Class 3R: A Class 3R laser is considered safe if
handled carefully, with restricted beam viewing.
With a class 3R laser, the MPE can be exceeded, but
with a low risk of injury. Visible continuous lasers in
Class 3R are limited to 5mW. For other wavelengths
and for pulsed lasers, other limits apply.
Table of Content
I. Parts
II. Preparation Before Use
III. LCD Display
IV. Functions and Operations
V. Custom Function Settings
Produktspecifikationer
| Varumärke: | Phottix |
| Kategori: | Fjärrutlösare |
| Modell: | Odin II |
Behöver du hjälp?
Om du behöver hjälp med Phottix Odin II ställ en fråga nedan och andra användare kommer att svara dig
Fjärrutlösare Phottix Manualer
10 Oktober 2025
14 Augusti 2024
Fjärrutlösare Manualer
- Sony
- Bolt
- Multiblitz
- Broncolor
- Westcott
- Elinchrom
- Angler
- Rotolight
- Impact
- DSC
- RadioPopper
- Chamberlain
- Vimar
- Cactus
- Somfy
Nyaste Fjärrutlösare Manualer
23 September 2025
17 September 2025
24 Augusti 2025
23 Augusti 2025
23 Augusti 2025
21 Augusti 2025
3 April 2025
16 December 2024
16 December 2024