POLARIS GENERAL 1000 Deluxe (2022) Bruksanvisning

POLARIS Inte kategoriserad GENERAL 1000 Deluxe (2022)

Läs nedan 📖 manual på svenska för POLARIS GENERAL 1000 Deluxe (2022) (150 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.8 stjärnor i genomsnitt av 4 användare

Ladda ner PDF

Sida 1/150

2022

OWNER’S

MANUAL

General 1000 Tractor

For Maintenance and Safety

WARNING

Read this manual carefully. It contains important safety

information. This is an adult vehicle only.

Operation is prohibited for those under 16 years of age.

2022 Owner’s Manual

GENERAL 1000 TRACTOR

GENERAL 1000 ABS TRACTOR

Unless noted, trademarks are the property of Polaris Industries Inc.

Recreational Off-Highway Vehicle Association® and ROHVA® are registered

trademarks of Recreational Off-Highway Vehicle Association. Tread Lightly®

is a registered trademark of the United States Department of Agriculture.

BatteryMINDer® is a registered trademark of VDC Electronics Inc. Loctite® is

a registered trademark of Henkel Corporation. NYOGEL® is a registered

trademark of Nye Lubricants, Inc. WD-40® is registered to WD-40

Manufacturing Company. QR Code® is a registered trademark of DENSO

WAVE INCORPORATED. Maxxis® is a registered trademark of Cheng Shin

Rubber Ind. Co., Ltd. OSHA® is a registered trademark of the Occupational

Safety and Health Administration, U.S. Department of Labor. Apple® and App

Store® are registered trademarks of Apple Inc. Google Play® is a registered

trademark of Google LLC. MACPHERSON RIDE® is a registered trademark

of Aftermarket Auto Parts Alliance, Inc. Carlisle® is a registered trademark of

CARLISLE INTANGIBLE, LLC.

publication is based on the latest product information at the time of

publication. Due to constant improvements in the design and quality of

production components, some minor discrepancies may result between the

actual vehicle and the information presented in this publication. Depictions

and/or procedures in this publication are intended for reference use only. No

liability can be accepted for omissions or inaccuracies. Any reprinting or

reuse of the depictions and/or procedures contained within, whether whole or

in part, is expressly prohibited.

The original instructions for this vehicle are in English. Other languages are

provided as translations of the original instructions.

Printed in Czech Republic

9940077 Rev 02

Thank you for purchasing a POLARIS vehicle, and welcome to our world-wide

family of POLARIS enthusiasts. Be sure to visit us online at www.polaris.com for

the latest news, new product introductions, upcoming events, career

opportunities and more.

Here at POLARIS we proudly produce an exciting line of utility and recreational

products. We believe POLARIS sets a standard of excellence for all utility and

recreational vehicles manufactured in the world today. Many years of experience

have gone into the engineering, design, and development of your POLARIS

vehicle, making it the finest machine we’ve ever produced.

For safe and enjoyable operation of your vehicle, be sure to follow the

instructions and recommendations in this owner’s manual. Your manual contains

instructions for minor maintenance, but information about major repairs is

outlined in the POLARIS Service Manual and can be performed by a factory

certified Master Service Dealer (MSD) technician.

Your POLARIS dealer knows your vehicle best and is interested in your total

satisfaction. Your POLARIS dealership can perform all of your service needs

during and after the warranty period.

For the most up-to-date owner’s manual visit https://www. polaris. com/en-us/

owners-manuals.

WELCOME

Introduction . . . . . . . . . . . . . . . . . . . . 7

Safety . . . . . . . . . . . . . . . . . . . . . . 13

Features and Controls . . . . . . . . . . . . . . 31

Operation . . . . . . . . . . . . . . . . . . . . 59

Winch Guide. . . . . . . . . . . . . . . . . . . 77

Emission Control Systems . . . . . . . . . . . . . 87

Maintenance . . . . . . . . . . . . . . . . . . 89

Specifications . . . . . . . . . . . . . . . . . . 125

POLARIS Products . . . . . . . . . . . . . . . . 129

Troubleshooting . . . . . . . . . . . . . . . . . 131

Warranty . . . . . . . . . . . . . . . . . . . . 135

Maintenance Log . . . . . . . . . . . . . . . . 141

INTRODUCTION

BEFORE YOU RIDE

This POLARIS vehicle is an off-road vehicle. Familiarize yourself with all laws

and regulations concerning the operation of this vehicle in your area.

WARNING

Failure to heed the warnings and safety precautions contained in this manual

can result in severe injury or death. Your POLARIS vehicle is not a toy and can

be hazardous to operate. This vehicle handles differently than cars, trucks or

other off-road vehicles. A collision or rollover can occur quickly, even during

routine maneuvers like turning, or driving on hills or over obstacles, if you fail to

take proper precautions.

• Read this owner’s manual and review the safety DVD that came with your

vehicle. A free extra copy of the DVD can be obtained by contacting your

local POLARIS dealer. Understand all safety warnings, precautions and

operating procedures before operating the vehicle. Keep this manual with

the vehicle.

• Never operate this vehicle without proper instruction. Take an authorized

training course. See the Safety Training section for more information.

• This vehicle is an ADULT VEHICLE ONLY. You MUST be at least age 16

and have a valid driver’s license to operate this vehicle.

• Always use the cab nets (or doors) while riding in this vehicle. Always keep

hands, feet and all other body parts inside the vehicle at all times.

• Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants

and over-the-ankle boots.

• Never operate this vehicle under the influence of drugs or alcohol, as these

conditions impair judgement and reduce the operator’s ability to react.

• Complete the New Operator Driving Procedures outlined in this manual.

Never allow a guest to operate this vehicle until the guest has completed the

New Operator Driving Procedures.

• Never permit a guest to operate this vehicle unless the guest has reviewed

the owner’s manual and all safety labels and has completed a safety training

IMPORTANT

For more information about safety, contact an authorized dealer or visit the

Polaris website at www.polaris.com.

INTRODUCTION

SAFETY SYMBOLS AND SIGNAL WORDS

The following signal words and symbols appear throughout this manual and on

your vehicle. Your safety is involved when these words and symbols are used.

Become familiar with their meanings before reading the manual.

DANGER

DANGER indicates a hazardous situation which, if not avoided, WILL result in

death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, COULD result

in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, COULD result

in minor to moderate injury.

NOTICE

NOTICE provides key information by clarifying instructions.

IMPORTANT

IMPORTANT provides key reminders during disassembly, assembly, and

inspection of components.

The Prohibition Safety Sign indicates an action NOT to take in

order to avoid a hazard.

The Mandatory Action Sign indicates an action that NEEDS to

be taken to avoid a hazard.

INTRODUCTION

EUROPEAN VIBRATION AND NOISE

The driver-perceived noise and hand/arm and whole body vibration levels of this

machinery is measured per EN 15997.

The operating conditions of the machinery during testing:

The vehicles were in like-new condition. The environment was controlled as

indicated by the test procedure(s).

The uncertainty of vibration exposure measurement is dependent on many

factors, including:

• Instrument and calibration uncertainty

• Variations in the machine such as wear of components

• Variation of machine operators such as experience or physique

• Ability of the worker to reproduce typical work during measurements

• Environmental factors such as ambient noise or temperature

RADIO EQUIPMENT

This vehicle contains the following radio equipment or components that contain

radio equipment:

COMPONENT COMPONENT ID MANUFACTURER

9200 Series Display RC7 Polaris Industries Inc.

B1 Gauge Bluetooth WT12 Silicon Labs

Rockford Fosgate®

Head Unit

PMX-P2 Rockford Corporations

Hereby, Polaris Industries Inc. declares that the above radio equipment radio

equipment is in compliance with EU Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://www.polaris.com/en-us/radio-conformity/

INTRODUCTION

NEAR-FIELD COMMUNICATION (NFC)

(IF EQUIPPED)

Some Polaris vehicles come equipped with a near-field communication (NFC)

chip. The NFC chip is embedded in the Polaris emblem located at the front of

the vehicle and seamlessly connects you to a digital platform of vehicle

information and tools. See your dealer for more information.

IMPORTANT

Not all devices are equipped with an NFC reader. Additionally, some devices

require third party applications to access NFC content. For questions regarding

the NFC reader on your device, refer to the device’s user manual.

On models equipped with NFC, place your smartphone directly over the Polaris

emblem to do the following:

• View vehicle-specific

information

• Access your Polaris Garage

• Download and view the

owner’s manual

• View accessory instructions

• Watch how-to videos

• Access warranty information

• Check for service notifications

RIDE COMMAND WITH NFC

Additional NFC features are available when using the Ride Command mobile

app. To access these features, do the following:

1. Download the Ride Command mobile app from the Apple App Store® or

Google Play® store.

2. Create or log in to an existing account.

3. From the Ride Command mobile app home screen, select Add Vehicle.

4. On the vehicle, tap the NFC-enabled badge with the phone to scan the

vehicle.

5. Confirm information, name your vehicle, and tap add to garage.

SYSTEM REQUIREMENTS

Refer to device manufacturer’s instructions to verify NFC read capability, and/or

NFC-capable add-ons.

INTRODUCTION

VEHICLE IDENTIFICATION NUMBERS

Record your vehicle's identification numbers and key number in the spaces

provided. Remove the spare key and store it in a safe place. An ignition key can

be duplicated only by ordering a POLARIS key blank (using your key number)

and mating it with one of your existing keys. The ignition switch must be

replaced if all keys are lost.

Vehicle Model Number:

Frame VIN q:

Engine Serial Number w:

Key Number

eMFG Decal

INTRODUCTION

SAFETY

SAFETY TRAINING

Safety training is a top priority for POLARIS. POLARIS strongly encourages you

and any family members who will be riding this vehicle to take a training course.

ROHVA® (Recreational Off-Highway Vehicle Association®) provides both an

online safety e-course and a hands-on safety course. Visit www.rohva.org or call

866-267-2751.

Your POLARIS vehicle is considered an off-road vehicle. Familiarize yourself

with all laws and regulations concerning the operation of this vehicle in your

area.

We strongly advise you to strictly follow the recommended maintenance

program outlined in your owner's manual. This preventive maintenance program

is designed to ensure that all critical components on your vehicle are thoroughly

inspected at specific intervals.

For more information about recreational off-road vehicle safety in the

United States, visit www.rohva.org, call 949-255-2560 or call POLARIS at

800-342-3764.

SAFETY

SAFE RIDING GEAR

Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants,

over-the-ankle boots and seat belt (if equipped) at all times. Protective gear

reduces the chance of injury.

RIDER COMFORT

Under certain operating conditions, heat generated by the engine and exhaust

system can elevate temperatures in the rider cab area. The condition occurs

most frequently when a vehicle is being operated in high ambient temperatures

at low speeds and/or high load conditions for an extended period of time. The

use of certain windshield, roof and/or cab systems may contribute to this

condition by restricting airflow.

Any discomfort due to heat buildup in

this area can be minimized by wearing

proper riding apparel and by varying

speeds to increase airflow.

qHelmet

wEye Protection

eLong Sleeves

rGloves

tLong Pants

yOver-the-Ankle Boots

SAFETY

HELMET

Wearing a helmet can prevent a severe head injury. Whenever riding this

POLARIS vehicle, always wear a helmet that meets or exceeds established

safety standards. Clasp the buckle and pull each strap tight to ensure the helmet

is properly secured to the head.

Parents and supervising adults should verify that young operators have a helmet

that fits, and should obtain one of proper size if it does not fit before allowing

operation.

Approved helmets in the USA and Canada bear a U.S.

Department of Transportation (DOT) label.

Approved helmets in Europe, Asia and Oceania bear

the ECE 22.05 label. The ECE mark consists of a

circle surrounding the letter E, followed by the

distinguishing number of the country which has

granted approval. The approval number and serial

number will also be displayed on the label.

EYE PROTECTION

Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding

this POLARIS vehicle, always wear shatterproof goggles or use a shatterproof

helmet face shield. POLARIS recommends wearing approved Personal

Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or

CE. Make sure protective eye wear is kept clean.

GLOVES

Wear gloves for comfort and for protection from sun, cold weather and other

elements.

BOOTS

Wear sturdy over-the-ankle boots for support and protection. Never ride a

POLARIS vehicle with bare feet or sandals.

CLOTHING

Wear long sleeves and long pants to protect arms and legs.

SAFETY

SAFETY LABELS AND LOCATIONS

Warning labels have been placed on the vehicle for your protection. Read and

follow the instructions of the labels on the vehicle carefully. If any of the labels

depicted in this manual differ from the labels on your vehicle, always read and

follow the instructions of the labels .on the vehicle

If any label becomes illegible or comes off, contact your POLARIS dealer to

purchase a replacement. Replacement labels are provided by POLARISsafety

at no charge. The part number is printed on the label.

ALERT LOCATIONS

The following labels are located on the front panel of the rear cargo box.

qLoad / Passenger / Tire Pressure Warning

wJacking Points Alert

eGreasing Points Alert

SAFETY

SHIFT ALERT (7183987)

The Shift Alert is located below the gear

selector.

To avoid transmission damage, shift

only when vehicle is stationary and at

idle.

APPLY BRAKE TO START. When this

vehicle is not in operation, or

unattended, place shift in the park

position.

GENERAL ALERT (7187405)

TRACTOR AND ZUGMASCHINE

The General Alert is located between the seats, above the armrest.

• Always read the owner’s manual.

• Never allow anyone under 16 years of age to operate this vehicle.

• Always use the cab nets or doors.

• Avoid operating in a manner that could result in a rollover.

• This vehicle is approved for on-road operation.

• Never use alcohol or drugs before or while driving or riding.

• Always wear seat belts.

• Wear approved helmet, goggles, and protective clothing.

• Avoid exhibition driving.

SAFETY

CLUTCH COVER ALERT (7181427)

qClutch Cover Alert Location

WARNING

Improper service or maintenance of this

PVT system can result in vehicle

damage, SEVERE INJURY or DEATH.

Always look for and remove debris

inside and around clutch and vent

system when replacing belt.

Read owner’s manual or see authorized

Polaris dealer.

JACKING POINTS ALERT (7184992)

Jacking positions are located beneath

the vehicle’s center points. Read the

owner’s manual.

GREASING POINTS ALERT (7185156)

Lubricate as recommended. Read

owner’s manual.

SAFETY

INTAKE ALERT (7185975)

Use a Polaris approved air filter. The

use of a non-Polaris approved air filter

may cause engine damage. Before

installing filter ensure there is no dirt or

debris in the clean side of the intake

tube. The air filter must be properly

seated and the hinges fully inserted

when the lid is reinstalled. Please

reference your owner’s manual for

additional information regarding the air

filter service.

Label Location: on the air box.

LOAD/PASSENGER/TIRE PRESSURE ALERT

(7187406)

The Load/Passenger/Tire Pressure warning decal is located on the front panel

of the rear cargo box.

WARNING

• Never carry passengers in cargo box.

• Passengers can be thrown off. This can cause serious injury or death.

• Read your Owner’s Manual.

NEVER carry fuel or other flammable

liquids on this vehicle. Failure to follow

this instruction could lead to serious

burn injuries or death

IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF

CONTROL RESULTING IN SERIOUS INJURY OR DEATH.

• If total payload is greater than 500 lbs., the vehicle must be operated in LOW

range.

• Reduce speed and allow greater distance for braking when carrying cargo.

• Overloading or carrying tall, off-center, or unsecured loads will increase your

risk of losing control. Loads should be centered and carried as low as possible

in box.

• For stability on rough or hilly terrain, reduce speed and cargo.

SAFETY

GENERAL TRACTOR / ABS

TRACTOR

MAXIMUM CARGO BOX LOAD 272 kg

TIRE PRESSURE IN KPa (bar) FRONT: 83 (0,83)

REAR: 110 (1,10)

MAXIMUM WEIGHT CAPACITY

INCLUDES WEIGHT OF OPERATOR,

PASSENGERS, CARGO, AND ACCESSORIES

467 kg

Read Operation and Maintenance Manual for more detailed loading information.

FUEL ALERT

Compatible Fuel Types:

• E5

• E10

SAFETY

OPERATOR SAFETY

WARNING

Serious injury or death can result if you do not follow these instructions and

procedures, which are outlined in further detail within your owner's manual.

• Read this entire manual and all labels carefully. Follow the operating

procedures described.

• Never allow anyone under the age of 16 to operate this vehicle and never

allow anyone without a valid driver's license to operate this vehicle.

• Do not carry a passenger until you have at least two hours of driving

experience with this vehicle.

• No person under the age of 12 may ride as a passenger in this vehicle. All

riders must be able to sit with backs against the seat, both feet flat on the floor

and both hands on the steering wheel (if driving) or on a passenger hand

hold.

• The driver and all passengers must wear helmet, eye protection, gloves, long-

sleeve shirt, long pants, over-the-ankle boots and seat belt at all times.

• Always use the cab doors while riding in this vehicle.

• Always keep hands and feet inside the vehicle at all times.

• Always keep both hands on the steering wheel and both feet on the

floorboards of the vehicle during operation.

• Never permit a guest to operate this vehicle unless the guest has read this

manual and all product labels.

• To reduce rollover risk, be especially careful when encountering obstacles

and slopes and when braking on hills or during turns.

• Never consume alcohol or drugs before or while operating this vehicle.

• Never operate at excessive speeds. Always travel at a speed proper for the

terrain, visibility and operating conditions, and your experience.

• Never attempt jumps or other stunts.

• Always inspect the vehicle before each use to make sure it's in safe operating

condition. Always follow the inspection procedures described in this manual.

• Always travel slowly and use extra caution when operating on unfamiliar

terrain. Be alert to changing terrain.

• Never operate on excessively rough, slippery or loose terrain.

• Always follow proper procedures for turning. Practice turning at slow speeds

before attempting to turn at faster speeds. Never turn at excessive speeds.

• Always have this vehicle checked by an authorized POLARIS dealer if it has

been involved in an accident.

• Never operate this vehicle on hills too steep for the vehicle or for your abilities.

Practice on smaller hills before attempting larger hills.

SAFETY

• Always follow proper procedures for climbing hills as described in this manual.

See page 73. Check the terrain carefully before attempting to climb a hill.

Never climb hills with excessively slippery or loose surfaces. Never apply

throttle suddenly. Never make sudden gear changes. Never go over the top of

a hill at high speed.

• Always follow the proper procedures outlined in this manual for traveling

downhill and for braking on hills. See page 74. Check the terrain carefully

before descending a hill. Never travel downhill at high speed. Avoid going

downhill at an angle, which would cause the vehicle to lean sharply to one

side. Travel straight down the hill where possible.

• Always check for obstacles before operating in a new area. Never attempt to

operate over large obstacles such as large rocks or fallen trees. Always follow

the proper procedures outlined in this manual when operating over obstacles.

See page 72.

• Always be careful of skidding or sliding. On slippery surfaces such as ice,

travel slowly and exercise caution to reduce the chance of skidding or sliding

out of control.

• Never operate your vehicle in fast-flowing water or in water deeper than that

specified in this manual. See page 74. Wet brakes may have reduced

stopping ability. Test your brakes after leaving water. If necessary, apply them

lightly several times to let friction dry out the pads.

• Always be sure there are no obstacles or people behind your vehicle when

operating in reverse. When it's safe to proceed in reverse, move slowly. Avoid

turning at sharp angles in reverse.

• Always use the proper size and type of tires specified in this manual. Always

maintain proper tire pressure as specified on safety labels.

• Never modify this vehicle through improper installation or use of non-

POLARIS approved accessories.

• Never exceed the stated load capacity for this vehicle. Cargo should be

properly distributed and securely attached. Reduce speed and follow the

instructions in this manual for hauling cargo or pulling a trailer. Allow a greater

distance for braking.

• Always place the transmission in PARK before getting out of the vehicle.

• Always stop the engine before refueling. Remove flammable material

containers from the box before filling them with fuel. Make sure the refueling

area is well ventilated and free of any source of flame or sparks. Gasoline is

extremely flammable. See the Refueling section for fuel safety warnings.

• Always remove the ignition key when the vehicle is not in use to prevent

unauthorized use by someone under the age of 16 or without a driver’s

license and proper training, or accidental starting.

• Never exceed your vehicle’s Gross Vehicle Weight (GVW) and never load the

vehicle improperly. Be aware that stopping distance is increased when a

vehicle is loaded.

• The driver should pay attention to the road at all times and always consider

the risk of being distracted if operating the instrument cluster while driving.

SAFETY

• Never drive the vehicle if the park brake or brake pedal is applied.

• An ABS vehicle is designed to operate with its original tires and a dened

pressure. Never use tires or wheels that are aftermarket, worn, incorrectly

sized, incorrectly pressurized, or not correctly balanced when operating an

ABS vehicle.

• Never install aftermarket calibration or accessories on an ABS vehicle.

• ABS vehicles will have an increased stopping distance. Always adjust vehicle

speed in accordance with your abilities, weather conditions, and surface

conditions, especially when driving on surfaces such as mud, gravel, sand,

grass, slippery roads, etc.

• Excessive braking in a short period of time (approximately more often than

once per kilometer) with ABS activation may create high temperatures in the

brake system components. New parts may be needed if this occurs.

EQUIPMENT MODIFICATIONS

Your POLARIS vehicle is designed to provide safe operation when used as

directed. Modifications to your vehicle may negatively impact vehicle stability.

Failure of critical machine components may result from operation with any

modifications, especially those that increase speed or power. This vehicle may

become less stable at speeds higher than those for which it is designed. Loss of

control may occur at higher speeds.

Do not install any non-POLARIS-approved accessory or modify the vehicle for

the purpose of increasing speed or power. Any modifications or installation of

non-POLARIS-approved accessories could create a substantial safety hazard

and increase the risk of bodily injury.

The POLARIS limited warranty on your POLARIS vehicle will be terminated if

any non-POLARIS approved equipment and/or modifications have been added

to the vehicle that increase speed or power.

The addition of certain accessories, including (but not limited to) mowers,

blades, tires, sprayers, or large racks, may change the handling characteristics

of the vehicle. Use only POLARIS-approved accessories, and familiarize

yourself with their function and effect on the vehicle.

The addition of certain accessories, including (but not limited to) overhead audio

speakers, may change the forward clearance in the vehicle. Polaris

recommends selecting a helmet that is compatible with the equipment on your

vehicle and provides the greatest amount of forward clearance. Always wear a

helmet that meets or exceeds the specifications in this owner’s manual. Refer to

the Safe Riding Gear section of this owner’s manual for more information. Use

only POLARIS-approved accessories.

FOR MORE INFORMATION ABOUT SAFETY IN THE UNITED STATES call

POLARIS at 1-800-342-3764.

SAFETY

AGE RESTRICTIONS

This vehicle is an ADULT VEHICLE ONLY.

Operation is prohibited for anyone under 16

years of age or anyone without a valid

driver’s license.

The operator must be tall enough to sit with

back against the seat, both feet flat on the

floor and both hands on the steering wheel (if

equipped) or handlebars.

OPERATING WITHOUT INSTRUCTION

Operating this ATV without proper instruction

increases the risk of an accident. The

operator must understand how to operate the

ATV properly in different situations and on

different types of terrain.

Beginning and inexperienced operators

should complete the recommended safety

training before operating this vehicle.

Never permit a guest to operate the ATV

unless the guest has read this manual and all

product labels and has completed a certified

safety training course.

USING ALCOHOL OR DRUGS

Never consume alcohol or drugs before or

while operating this vehicle.

Operating this vehicle after consuming

alcohol or drugs could adversely affect

operator judgment, reaction time, balance

and perception.

SAFETY

SEAT BELTS

WARNING

Riding in this vehicle without wearing the seat belt increases the risk of serious

injury in the event of rollover, loss of control, other accident or sudden stop.

Seat belts may reduce the severity of injury in these circumstances. The

operator and all passengers MUST wear their seat belt at all times.

PROTECTIVE APPAREL

Riding in this vehicle without wearing an approved helmet and protective

eyewear and footwear increases the risk of a serious injuries in the event of an

accident.

Operator and/or all passengers must always wear an approved helmet that fits

properly, gloves, long-sleeve shirt, long pants, over-the-ankle boots, and eye

protection (goggles or face shield).

CAB DOORS (IF EQUIPPED)

Riding in this vehicle without closed and latched cab doors increases the risk of

serious injury or death in the event of an accident or rollover. Always make sure

all cab doors are closed and latched while riding in this vehicle. Cab doors are

NOT intended to be used as arm rests. Always keep hands and feet inside the

vehicle at all times.

FAILURE TO INSPECT BEFORE OPERATING

WARNING

Failure to inspect and verify that the vehicle is in safe operating condition

before operating increases the risk of an accident. Always perform the Pre-

Ride Inspection outlined in the Operation chapter before each use of your

vehicle to make sure it's in safe operating condition. Always follow the

inspection and maintenance procedures and schedules described in this

owner’s manual. See the Periodic Maintenance section of the Maintenance

chapter.

OPERATING WITH A LOAD ON THE VEHICLE

The weight of the cargo, operator, and passengers impacts vehicle operation

and stability. For your safety and the safety of others, carefully consider how

your vehicle is loaded and how to safely operate the vehicle. Follow the

instructions in this manual for loading, tire pressure, gear selection and speed.

SAFETY

• The vehicle’s maximum weightDo not exceed vehicle weight capacities.

capacity is listed in the specifications section of this manual and on a label on

the vehicle. When determining the weight you are adding to the vehicle,

include the weight of the operator, passengers, accessories, loads in the rack

or box and the load on the trailer tongue. The combined weight of these items

must not exceed the maximum weight capacity.

• The recommended tire pressures are listed in the specifications section of this

manual and on a label on the vehicle.

Always follow these guidelines:

UNDER ANY OF THESE CONDITIONS: DO ALL OF THESE STEPS:

Operator and/or cargo exceeds half the

maximum weight capacity

1. Slow down.

2. Verify tire pressure.

3. Use extra caution when operating.

Operating in rough terrain

Operating over obstacles

Climbing an incline

Towing

REFUELING

Gasoline is highly flammable and explosive under certain conditions.

• Always exercise extreme caution whenever handling gasoline.

• Always turn off the engine when refueling.

• Always refuel outdoors or in a well ventilated area free of any source of flame

or sparks.

• NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow

this instruction could lead to serious burn injuries or death.

• Do not smoke or allow open flames or sparks in or near the area where

refueling is performed or where gasoline is stored.

• Do not overfill the tank. Do not fill the tank neck.

• If gasoline spills on your skin or clothing, immediately wash it off with soap

and water and change clothing.

OPERATING A DAMAGED VEHICLE

CAUTION

Operating a damaged vehicle can result in an accident. After any rollover or

other accident, have a qualified service dealer inspect the entire machine for

possible damage, including (but not limited to) seat belts, rollover protection

devices, brakes, throttle, and steering systems.

SAFETY

OPERATING AT EXCESSIVE SPEEDS

CAUTION

Operating this vehicle at excessive speeds increases the operator's risk of

losing control. Always operate at a speed that's appropriate for the terrain, the

visibility and operating conditions and your skills and experience.

OPERATING ON PAVEMENT

This vehicle's tires are designed for off-road use only, not for use on pavement.

Operating this vehicle on paved surfaces (including sidewalks, paths, parking

lots and driveways) may adversely affect the handling of the vehicle and may

increase the risk of loss of control and accident or rollover. Avoid operating the

vehicle on pavement. If it's unavoidable, travel slowly, travel short distances and

avoid sudden turns or stops.

OPERATING ON PUBLIC ROADS

Zugmaschine and Tractor Models

This vehicle is approved for on-road operation.

WARNING

Other Models

Operating this vehicle on public streets, roads or highways could result in a

collision with another vehicle. Never operate this vehicle on any public street,

road or highway, including dirt and gravel roads (unless designated for on-road

use).

TURNING IMPROPERLY

CAUTION

Turning improperly could cause loss of traction, loss of control, accident or

rollover. Always follow proper procedures for turning as described in this

owner’s manual.

Avoid sharp turns. Never turn while applying heavy throttle. Never make abrupt

steering maneuvers. Practice turning at slow speeds before attempting to turn at

faster speeds.

SAFETY

OPERATING IN UNFAMILIAR TERRAIN

CAUTION

Failure to use extra caution when operating on unfamiliar terrain could result in

an accident or rollover.

CAUTION

Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause

loss of control or rollover.

Travel slowly and use extra caution when operating on unfamiliar terrain. Always

be alert to changing terrain conditions.

JUMPS AND STUNTS

CAUTION

Exhibition driving increases the risk of an accident or rollover. DO NOT do

power slides, “donuts”, jumps or other driving stunts. Avoid exhibition driving.

IMPROPER HILL CLIMBING

CAUTION

Improper hill climbing could cause loss of control or rollover. Use extreme

caution when operating on hills. Always follow proper procedures for hill

climbing as described in this owner's manual.

DESCENDING HILLS IMPROPERLY

CAUTION

Improperly descending a hill could cause loss of control or rollover. Always

follow proper procedures for traveling down hills as described in this owner’s

manual.

STALLING WHILE CLIMBING A HILL

CAUTION

Stalling or rolling backwards while climbing a hill could cause a rollover.

Maintain a steady speed when climbing a hill.

SAFETY

If you lose all forward speed:

Apply the brakes gradually until the vehicle is fully stopped. Place the

transmission in reverse and slowly allow the vehicle to roll straight downhill while

applying light brake pressure to control speed.

If you begin rolling downhill:

Never apply engine power. Apply the brakes gradually until the vehicle is fully

stopped. Place the transmission in reverse and slowly allow the vehicle to roll

straight downhill while applying light brake pressure to control speed.

IMPROPER TIRE MAINTENANCE

WARNING

Operating this vehicle with improper tires or with improper or uneven tire

pressure could cause loss of control or accident. Always use the size and type

of tires specified for your vehicle. Always maintain proper tire pressure as

described in the owner's manual and on safety labels.

SKIDDING OR SLIDING

CAUTION

Failure to use extra caution when operating on excessively rough, slippery or

loose terrain could cause loss of traction, loss of control, accident or rollover.

Do not operate on excessively slippery surfaces. Always slow down and use

additional caution when operating on slippery surfaces.

CAUTION

Skidding or sliding due to loss of traction can cause loss of control or rollover (if

tires regain traction unexpectedly). Always follow proper procedures for

operating on slippery surfaces as described in this owner's manual.

OPERATING ON FROZEN BODIES OF WATER

WARNING

Serious injury or death can result if the vehicle and/or the operator fall through

the ice. Never operate the vehicle on a frozen body of water unless you have

first verified that the ice is sufficiently thick to support the weight and moving

force of the vehicle, you and your cargo, together with any other vehicles in

your party.

SAFETY

Always check with local authorities and residents to confirm ice conditions and

thickness over your entire route. Vehicle operators assume all risk associated

with ice conditions on frozen bodies of water.

UNAUTHORIZED USE OF THE VEHICLE

Leaving the keys in the ignition can lead to unauthorized use of the vehicle by

someone under the age of 16, without a drivers license, or without proper

training. This could result in an accident or rollover. Always remove the ignition

key when the vehicle is not in use.

EXPOSURE TO EXHAUST

Engine exhaust fumes are poisonous and can cause loss of consciousness or

death in a short time. Never start the engine or let it run in an enclosed area.

The engine exhaust from this product contains chemicals known to cause

cancer, birth defects or other reproductive harm. Operate this vehicle only

outdoors or in well-ventilated areas.

HOT EXHAUST SYSTEMS

WARNING

Exhaust system components are very hot during and after use of the vehicle.

Hot components can cause burns and fire. Do not touch hot exhaust system

components. Always keep combustible materials away from the exhaust

system.

Use caution when traveling through tall grass, especially dry grass and when

traveling through muddy conditions. Always inspect the underside of the

vehicle and areas near the exhaust system after driving through tall grass,

weeds, brush, other tall ground cover, and muddy conditions. Promptly remove

any grass, debris or foreign matter clinging to the vehicle and pay particular

attention to the exhaust system area.

LIGHTNING AND POWERLINES

Avoid operating this vehicle when lightning could occur and when near

powerlines. Rubber tires, rubber handgrips, and a foam seat will not protect a

rider from lightning strikes or electrical surges. Always seek safe shelter when

lightning is imminent, and keep a safe distance from powerlines at all times.

SAFETY

FEATURES AND CONTROLS

COMPONENT LOCATIONS

qConsole

wHeadlights

eRadiator

rFront Bumper/ Brush Guard (if equipped)

tMuffler (Spark Arrester)

yCV Boot/Rear Caliper

uReceiver Hitch

iROPS Cab Frame

oCargo Box

aTaillights

sPVT Intake Screen

FEATURES AND CONTROLS

GEAR SELECTOR

Low gear is the primary driving range for your vehicle. High gear is intended for

use on hard-packed surfaces with light loads. Using high gear for heavy loads,

hilly terrain or in wet, muddy conditions will increase the chance of drive belt

burning. See the Drive Belt Wear/Burn section on page 131.

To shift gears, brake to a complete stop.

When the engine is idling, move the

lever qto the desired gear.

H: High Gear

L: Low Gear

N: Neutral

R: Reverse

P: Park

NOTICE

Shifting gears with the engine speed above idle or while the vehicle is moving

could cause transmission damage. Always shift when the vehicle is stationary

and the engine is at idle.

TIP

Maintaining shift linkage adjustment is important to assure proper transmission

function. Your POLARIS dealer, or other qualified person, can assist in

resolving any shifting problems.

USING LOW RANGE

Always shift into low gear for any of the following conditions.

• Operating in rough terrain or over obstacles

• Loading the vehicle onto a trailer

• Towing loads

• Driving frequently at low RPM or at ground speeds below 7 MPH (11 km/h)

FEATURES AND CONTROLS

SWITCHES

IGNITION SWITCH

The ignition switch is a four-position,

key-operated switch. The key can be

removed from the switch when it is in

the OFF position.

OFF Turn the key to the OFF position to stop the engine.

Electrical circuits are off.

LIGHTS ON All lights are on. Electrical circuits are on. Electrical

equipment can be used.

POSITION

LIGHTS ON

The headlights are off. Position lights are on.

Electrical equipment can be used.

START

Turn the key to the START position to engage the

electric starter. See the Starting the Engine section for

details.

FEATURES AND CONTROLS

DRIVELINE MODE SWITCH

The Driveline Mode Switch has three positions: All Wheel Drive (AWD),

Differential Lock/Two Wheel Drive (2WD) and Off (Turf Mode).

qAWD: Press the top of the switch to

engage All Wheel Drive (AWD).

w2WD: Move the switch to the center

position to lock the differential and operate in

two wheel drive (2WD).

eTURF Mode: Press the bottom of the

switch for Turf Mode (unlocked differential

power). In Turf Mode, the rear drive wheels

operate independently (1WD) depending on

tire traction. This mode of operation is well

suited to turf driving or when active traction is

not needed.

WINCH SWITCH

Press the top of the rocker switch to spool line out from

the winch. Press the bottom of the rocker switch to

spool line in to the winch. Move the rocker switch to

the center position to stop spooling.

WIRELESS WINCH REMOTE (IF EQUIPPED)

Press and hold the OUT button on the switch to spool line out from the winch.

Press and hold the IN button of the switch to spool line in to the winch. Release

either button to stop spooling.

FEATURES AND CONTROLS

HAZARD SWITCH

Push the hazard warning switch to cause all turn signal

lights to flash simultaneously. Both turn signal indicators

on the console will also flash. Use this feature to alert

others of an emergency or other situation requiring

caution.

TURN SIGNAL LEVER

Before turning, activate a turn signal to alert others of your intentions. Check turn

signal lamps before each ride.

TIP

The key must be in the ON position to activate the turn signals.

Move the lever upward qto signal a

right turn. The right signal lamps and

indicator will flash.

Move the turn signal lever downward w

to signal a left turn. The left turn signal

lamps in the taillight and below the front

headlight will flash. The turn signal

indicator in the gauge will also flash.

Return the lever to the center position to

end the signal.

FEATURES AND CONTROLS

AUXILIARY OUTLET

The vehicle is equipped with a 12-volt accessory

outlet on the dash. Use the outlet to power an

auxiliary light or other optional accessories or

lights. For service, the dash outlet connection is

under the dash.

FOOT PEDALS

BRAKE PEDAL

Depress the brake pedal qto slow or stop the vehicle. Apply the brakes while

starting the engine.

When the brake pedal is depressed, the brake light comes on. Check the brake

light before each ride.

1. Turn the ignition switch to the ON position.

2. Apply the brakes. The brake light should come on after about 0.4 in (10 mm)

of pedal travel.

FEATURES AND CONTROLS

THROTTLE PEDAL

Push the throttle pedal wdown to increase engine speed. Spring pressure

returns the pedal to the rest position when released. Always check that the

throttle pedal returns normally before starting the engine.

TIP

If the throttle pedal and brake pedal are applied simultaneously, engine power

may be limited.

PARK BRAKE LEVER

Always apply the service brakes before engaging or releasing the park brake. To

help prevent the vehicle from rolling, set the park brake when parking the

vehicle. When the park brake is set and the park brake indicator is illuminated,

engine speed is limited. If the accelerator is applied, this limiting feature

prevents operation, which protects the park brake pads from excessive wear.

TIP

This feature will not operate properly if the park brake connector or switch

(under the hood) malfunctions or becomes disconnected, or if the switch has

moved. Check for disconnection, then see your dealer or other qualified

service person promptly if this feature fails to operate properly.

1. To set the park brake, apply the

brakes.

2. Pull the park brake lever qupward

as far as possible.

3. To release the park brake, apply the

brakes. Press the park brake

release winward and move the

lever downward as far as possible.

FEATURES AND CONTROLS

BRAKE FLUID LEVEL SENSOR

This vehicle is equipped with a sensor that detects when the brake fluid level is

below the required minimum. The brake fluid level should be between the MAX

line qand the MIN line won the reservoir. The brake failure alarm indicator

lamp (see page 48) will illuminate if the brake fluid level falls below the minimum.

On bumpy or rocky terrain, the lamp may also illuminate if the brake fluid level is

close to the MIN line, but not below it. To avoid this, fill the reservoir up to the

MAX line.

FEATURES AND CONTROLS

SEATS

CAUTION

Prolonged sun exposure can cause excessive heating of the steering wheel

and seats. Use caution when handling hot surfaces to avoid burns.

NOTE

These seats are designed for this tractor model. Replacement with different

seats is not possible.

Before operating the vehicle, always push down on all seat backs to ensure the

latches are secure.

SEAT ADJUSTMENTS

The driver’s seat is equipped with an adjustment lever and adjustment knob for

optimal spacing.

• Pull the adjustment lever to the left to move the seat forward or rearward.

Once released, the lever will lock into place.

• Rotate the adjustment knob to move the seat forward upward or rearwardand

and downward.

Driver’s Seat

Up Position

Driver’s Seat

Down Position

To adjust the front passenger seat, loosen (do not remove) the four screws

located on the seat bottom. Slide the seat forward or rearward to the desired

position. Tighten the screws to 8.1 Nm. (6 ft. lbs.) Do not overtighten.

FEATURES AND CONTROLS

SEAT AND STORAGE COMPARTMENTS

A small storage compartment is located

between the driver’s seat and

passenger’s seat q.

If your model is equipped with a storage

console and cup holders located

between the seats, lift the console lid to

access the storage compartment.

The ECU is located in the compartment

behind the driver’s seat. Do not use this

area for storage.

The electrical compartment is located

under the driver’s seat. Never use the

electrical compartment for storage.

Remove the driver’s seat to access the

battery and fuse box.

SEAT REMOVAL AND COMPARTMENT ACCESS

Pull the rear edge of a seat upward to release the latch pins from the grommets.

Roll the seat forward to access the under-seat area. To completely remove a

seat, roll the seat forward and lift the seat tabs from the seat base mounts.

Always make sure all seats are properly installed and securely latched before

operating. Push down firmly on the rear of each seat until the latch pins are fully

seated into the grommets.

SEAT BELTS

FEATURES AND CONTROLS

This vehicle is equipped with three-point lap and diagonal seat belts for the

operator and any passengers. Always make sure the seat belts are secured for

all riders before operating. The driver’s seat belt is equipped with a seat belt

interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not

secured.

WARNING

Falling from a moving vehicle could result in serious injury or death. Always

fasten your seat belt securely before operating or riding in the vehicle.

To wear the seat belt properly, follow this procedure:

1. For 3-point belts, pull the seat belt latch qdownward and across your chest

toward the buckle at the inner edge of the seat. The belt should fit snugly

across your hips and diagonally across your chest. Make sure the belt is not

twisted.

2. Push the latch plate qinto the buckle wuntil it clicks.

3. Release the strap, it will self tighten.

4. To release the seat belt, press the square red button in the buckle’s center.

SEAT BELT INSPECTION

Inspect all seat belts for proper operation before each use of the vehicle.

1. Push the latch plate into the buckle until it clicks. The latch plate must slide

smoothly into the buckle. A click indicates that it's securely latched.

2. Push the red release latch in the middle of the buckle to make sure it

releases freely.

3. Pull each seat belt completely out and inspect the full length for any damage,

including cuts, wear, fraying or stiffness. If any damage is found, or if the seat

belt does not operate properly, have the seat belt system checked and/or

replaced by an authorized dealer.

4. To clean dirt or debris from the seat belts, sponge the straps with mild soap

and water. Do not use bleach, dye or household detergents. Rinse the entire

length of the belt webbing. Use a garden hose to flush out the retractor and

latch housings regularly.

FEATURES AND CONTROLS

ELECTRONIC POWER STEERING

Electronic power steering (EPS) engages when the ignition key is turned to the

ON position. EPS remains engaged whether the vehicle is moving or idle. To

conserve battery power, the EPS will shut down 5 minutes after the engine is

stopped if the key remains in the ON position. The EPS warning indicator will

illuminate to indicate the EPS has shut down. Turn the key off and on to reset

the unit. If the light remains on after starting the engine, the EPS system is

inoperative. See your POLARIS dealer, or other qualified person, as soon as

possible for repair. Continued operation could result in permanent damage to the

EPS unit and increased steering effort.

ADJUSTABLE STEERING WHEEL

The steering wheel can be tilted upward or downward for rider preference.

Lift and hold the adjustment lever while moving the steering wheel upward or

downward. Release the lever when the steering wheel is at the desired position.

ROLLOVER PROTECTIVE STRUCTURE (ROPS)

The Rollover Protective Structure (ROPS) on this vehicle meets OECD Code 4

rollover performance requirements. Always have your authorized POLARIS

dealer thoroughly inspect the ROPS if it ever becomes damaged in any way.

No device can assure occupant protection in the event of a rollover. When used

with seat belts and cab nets or doors, the ROPS helps prevent occupants from

being ejected from the vehicle. Always follow all safe operating practices

outlined in this manual to avoid vehicle rollover.

WARNING

Vehicle rollover could cause severe injury or death. Always avoid operating in

a manner that could result in vehicle rollover.

TRAILER HITCH

This vehicle is equipped with a receiver hitch bracket for a trailer hitch and trailer

towing equipment.

NOTICE

To avoid injury and property damage, always heed the warnings and towing

capacities outlined in the specification table.

WARNING

Whenever the vehicle is towing, always stay clear of the area between the

vehicle and the towed object.

FEATURES AND CONTROLS

REAR HITCH

NOTICE

After 1000 km of use, tighten the bolt holding the trailer ball to the hitch to 445

N m.⋅

Use the rear hitch for towing a trailer. See the Hauling Cargo section for details

and procedures.

The values given below pertain to factory-installed hitches and are provided for

informational purposes only.

IMPORTANT

For vehicle-specific trailering values, see the Specifications chapter.

The vehicle-specific values take precedent if they are lower than the

component values shown below.

REAR HITCH SPECIFICATIONS

Fasteners Metal pin with security cotter pin

Weld Length and Positions 7 mm fillet, all around

Maximum Vertical Load 100 kg applied on coupling point

Approval # E20-55R-01 3487

Per Tractor certification, maximum braked and unbraked trailer mass is 680 kg.

REAR HITCH CERTIFICATION LABEL

The hitch certification label is located near the hitch on models equipped with a

factory-installed rear hitch.

FEATURES AND CONTROLS

HITCH REMOVAL / INSTALLATION

1. To remove the hitch (if equipped), remove the cotter pin qand hitch pin w.

Remove the hitch, then reinstall the hitch pin wand secure the cotter pin q.

2. To install the hitch, remove the cotter pin qfrom the hitch pin and remove

the hitch pin w.

3. Install the hitch to the receiver.

4. Reinstall the hitch pin (from the left side of the hitch) through the bore of both

the receiver and the hitch.

5. Reinstall the cotter pin. Make sure the hitch assembly is secure at that the

cotter pin is properly engaged over the hitch pin.

7-WAY TRAILER CONNECTOR

The 7-way trailer connector installed on

your vehicle meets the requirements of

European standard ISO 1724.

Improper electrical wiring changes can

result in damage to both vehicle and

trailer components. When in doubt

about your trailer connection, please

contact a qualified towbar specialist for

assistance.

FEATURES AND CONTROLS

FUEL CAP

NOTICE

Never use fuel blends with more than 10% ethanol. Engine damage could

occur.

The fuel tank filler cap qis located on

the right side of the vehicle near the

passenger seat. Use only unleaded

gasoline with a minimum pump octane

number of 87 R+M/2 octane (equivalent

to 95 RON in Europe). Unleaded fuel

blends with up to 10% ethanol can be

used.

FEATURES AND CONTROLS

HOOD

Remove the hood to access the radiator pressure cap and coolant overflow

bottle.

CAUTION

Escaping steam can cause burns. Never remove the pressure cap while the

engine is warm or hot. Always allow the engine to cool before removing the

pressure cap.

To remove the hood, do the following:

1. Turn the hood fasteners w1/4 turn.

2. Grasp the upper hood edge and pull

upward to disengage the fasteners.

3. Pivot the hood forward and lift

upward to disengage the lower hood

hooks.

4. Lift the hood away from the vehicle.

CAB DOORS

This vehicle is equipped with cab doors. Riding in this vehicle without closed and

latched cab doors increases the risk of serious injury or death in the event of an

accident or rollover. Always make sure all cab doors are closed and latched

when riding in this vehicle.

Always inspect doors and latches for wear and damage before each use of the

vehicle. Promptly replace any worn or damaged parts with new parts available

from your authorized POLARIS dealer, or other qualified person.

FEATURES AND CONTROLS

INSTRUMENT CLUSTER

NOTICE

High water pressure may damage components. Wash the vehicle by hand or

with a garden hose using mild soap. Certain products, including insect

repellents and chemicals, will damage the speedometer lens and other plastic

surfaces. Do not use alcohol to clean the instrument cluster. Do not allow

insect sprays to contact the lens. Immediately clean off any gasoline that

splashes on the instrument cluster.

qSpeedometer

wTachometer

eIndicator Lamps

rMode Button

tToggle Buttons

yRider Information Center

SPEEDOMETER

The speedometer displays vehicle speed in either miles per hour (MPH) or

kilometers per hour (km/h).

TACHOMETER

The tachometer displays engine speed in revolutions per minute (RPM).

MODE BUTTON

Press and hold the MODE button rto enter or exit the settings menu. Press

and release the MODE button to cycle through Area 1 modes and to select an

item.

FEATURES AND CONTROLS

TOGGLE BUTTONS

Press and release either toggle buttontto cycle through the options menu or

Area 2 modes. Press and hold either toggle button to reset an item. See page

52.

TIP

With the ignition key off, pressing the MODE button or either toggle button will

power up the Rider Information Center for 10 seconds to allow viewing of the

odometer and the clock.

INDICATOR LAMPS

LAMP INDICATES CONDITION

Vehicle Speed When standard mode is selected, speed displays in miles per

hour.

When metric mode is selected, speed displays in kilometers

per hour.

Over

Temperature

This lamp illuminates to indicate an overheated engine. If the

indicator flashes, the overheating condition remains, and the

system will automatically reduce engine power.

Electric Power

Steering (EPS)

Warning (if

equipped)

This indicator illuminates briefly when the key is turned to the

ON position. If the light remains on, the EPS system is

inoperative. See your POLARIS dealer, or other qualified

person, as soon as possible for repair. Continued operation

could result in permanent damage to the EPS unit and

increased steering effort.

Neutral This lamp illuminates when the transmission is in neutral and

the ignition key is in the ON position.

High Beam This lamp illuminates when the headlamp switch is set to high

beam.

Helmet/Seat Belt This lamp is a reminder to the operator to ensure all riders are

wearing helmets and seat belts before operating. The driver’s

seat belt is equipped with a seat belt interlock. Vehicle speed

will be limited to 15 MPH (24 km/h) if the seat belt is not

secured.

Check Engine This indicator appears if an Electronic Fuel Injection (EFI)

related fault occurs. Do not operate the vehicle if this warning

appears. Serious engine damage could result. Your dealer

can assist.

FEATURES AND CONTROLS

LAMP INDICATES CONDITION

Check Battery This warning usually indicates that the vehicle is operating at

an RPM too low to keep the battery charged. It may also

occur when the engine is at idle and high electrical load

(lights, cooling fan, accessories) is applied. Drive at a higher

RPM or recharge the battery to clear the warning.

Low Fuel This lamp illuminates when fuel level in the fuel tank is low.

Direction

Indicators

Direction indicators flash when a turn signal is active. Both

indicators flash when the hazard signal is active.

Brake Failure

Alarm

Lamp illuminates when Brake System (if Brake Failure Alarm

is equipped) detects low pressure in brake hydraulic system.

Park Brake Lamp illuminates when the Park Brake is applied.

Trailer Indicator The Turn Trailer Indicator is illuminating when the trailer turn

signals are active.

ABS System The ABS System symbol (if equipped with ABS System) is

flashing when ABS is disabled by driver. Whenever ABS

failure is detected, the ABS symbol illuminates. If this

happens, inspect the ABS system.

Overspeed

Indicator

The Overspeed symbol is illuminated when speed exceeds

the Speed Limitation function (if equipped).

FEATURES AND CONTROLS

RIDER INFORMATION CENTER

qGear Indicator This indicator displays gear shifter position.

H = High Gear

L = Low Gear

N = Neutral

R = Reverse Gear

P = Park

– = Gear Signal Error (or shifter between gears)

wAWD Indicator This indicator shows whether 2X4 or AWD is active.

eService

Indicator

A flashing wrench symbol alerts the operator that the preset

service interval has been reached. Your POLARIS dealer, or

other qualified person, can provide scheduled maintenance.

See page 55 for resetting instructions.

rFuel Gauge The segments of the fuel gauge show the level of fuel in the

fuel tank. When the last segment clears, a low fuel warning is

activated. The outline of the fuel display will flash. Refuel

immediately.

tSpeed

Limitation (if

equipped)

This vehicle may be equipped with a maximum speed

limitation function. This would be displayed on the screen as

“LIM” followed by the speed. “LIM 30” for example.

The rider information center is located

in the instrument cluster. All segments

will light up for one second at start-up.

If the instrument cluster fails to

illuminate, a battery over-voltage may

have occurred and the instrument

cluster may have shut off to protect the

electronic speedometer. If this occurs,

your POLARIS dealer, or other qualified

person, can provide proper diagnosis.

The information center is set to display

standard units of measurement and a

12-hour clock at the factory. To change

to metric and/or a 24-hour clock hold

the mode button and cycle to the clock

menu. Use the directional arrows to

change the clock settings.

FEATURES AND CONTROLS

MODE INFORMATION DISPLAYS

The rider information center contains

three areas that display mode

information.

qArea 1 Modes Description

Engine Temperature Temperature of engine coolant

Vehicle Speed Speed of vehicle

Tachometer Engine speed (RPM)

wArea 2 Modes Description

Odometer The odometer records and displays

the distance traveled by the vehicle.

Trip Meters (T1/T2) A trip meter records the distance

traveled by the vehicle if reset before

each trip. To reset, see page 54.

Engine Hours Total hours of engine operation since

manufacture

Service Hours A flashing wrench symbol indicates

that the preset service interval has

been reached. To reset, see page 55.

Trip Time Time length of vehicle operation

since mode was last reset

eArea 3 Modes Description

Clock The clock displays time in a 12-hour

or 24-hour format. To reset, see page

53.

FEATURES AND CONTROLS

ACCESSING MENUS AND OPTIONS

GAUGE SETTINGS MENU

Press and release the MODE button to cycle through the Area 1 modes until the

desired default mode displays. See the Mode Information Displays section for

details.

Press and hold the MODE button to enter the settings menu.

The OPTIONS screen will display for a few seconds.

1. Press and release either toggle

button to cycle to the desired option.

2. Press MODE to select the option.

3. Press either toggle button to cycle to

the desired setting.

4. Press MODE to save and exit to the

settings menu.

5. Press and hold the MODE button to

exit the settings menu.

BACKLIGHT COLOR

The information center backlight can be

set to either blue or red.

1. Press and hold the MODE button to

enter the settings menu.

2. Press either toggle button to cycle to

the “BL COLOR” option. Press

MODE to select.

3. Press either toggle button to cycle to

the desired setting.

4. Press MODE to save and exit to the

settings menu,

FEATURES AND CONTROLS

BACKLIGHT BRIGHTNESS

The information center backlight can be set to either blue or red.

1. Press and hold the MODE button to

enter the settings menu.

2. Press either toggle button to cycle to

the “BL LEVEL” option. Press

MODE to select.

3. Press “UP” button to increase

brightness. Press “DOWN” button to

decrease brightness.

4. Press MODE to select and exit to

the settings menu.

CLOCK

The clock must be reset any time the battery has been disconnected or

discharged.

1. Press and hold the MODE button to

enter the settings menu.

2. Press either toggle button to cycle to

the “CLOCK” option. Press MODE to

select.

3. Press either toggle button to cycle to

the desired setting (12H or 24H).

Press MODE to select.

4. Press either toggle button to change

each segment of the clock. Press

MODE to accept a change and

advance to the next segment.

FEATURES AND CONTROLS

DISPLAY UNITS (STANDARD/METRIC)

1. Press and hold the MODE button to enter the settings menu.

2. Press either toggle button to cycle to the desired “UNITS” option (distance,

temperature or volume). Press MODE to select.

3. Press either toggle button to cycle to the desired setting.

4. Press MODE to save and exit to the settings menu.

TRIP METER

Use a trip meter to track the distance

traveled during a specific trip or period

of time. Reset the meter to zero before

traveling.

1. Press either toggle button to cycle to

the desired trip meter option (T1 or

T2).

2. Press and hold either toggle button

until the meter resets to zero.

TRIP TIME

Use a trip time meter to track the travel

time during a specific trip. Reset the

meter to zero before traveling.

1. Press either toggle button to cycle to

the trip time option (TT).

2. Press and hold either toggle button

until the meter resets to zero.

FEATURES AND CONTROLS

PROGRAMMABLE SERVICE INTERVAL

The service interval counter is programmed to 25 hours at the factory. As hours

of engine operation increase, the counter decreases. The wrench icon will flash

for about 10 seconds when the counter reaches zero (0), and each time the key

is turned on thereafter, until the counter is reset.

When this feature is enabled, it provides a convenient reminder to perform

routine maintenance. Refer to the Periodic Maintenance Chart for recommended

service intervals.

Use the following procedure to reset or change the service interval.

1. Press and hold the MODE button to

enter the settings menu.

2. Press either toggle button to cycle to

the “Service Hours” option. Press

MODE to select.

3. Press MODE to reset the existing

value and exit, or press either toggle

button to change the value. Press

MODE to save and exit to the

settings menu.

SPEED LIMITATION DEVICE (IF EQUIPPED)

1. Press and hold the Mode button to

enter the settings menu.

2. Use the toggle buttons to find the

Speed Limitation screen (SPD LIM).

Press the MODE button to select.

3. Choose your desired maximum

speed (between 30-85 km/h) by

using the toggle buttons.

The Speed Limitation feature is disabled automatically when the MODE button is

pressed again or ignition switch is in the OFF position.

FEATURES AND CONTROLS

ANTI-LOCK BRAKING SYSTEM – ABS (IF EQUIPPED)

1. Press and hold the Mode button to

enter the settings menu.

2. Use the toggle buttons to find the

ABS system “enable” or “disable”

setting. Press the Mode button to

select the desired setting.

3. The ABS symbol will appear on the

instrument cluster when the system

is enabled.

NOTICE

The ABS system can be disabled only if the rider is traveling at a speed below

30 km/h. The ABS system is automatically activated if travelling above 30 km/h

and cannot be disabled.

ENGINE ERROR CODES

The error screen displays only when the CHECK ENGINE indicator is on or

when it goes on and off during one ignition cycle. Error codes are not stored.

When the key is turned OFF, the code and message is lost, but will reappear if

the fault reoccurs after restarting the engine.

If the CHECK ENGINE lamp or the EPS lamp illuminates, retrieve the active

error codes from the display.

qFailure Mode Indicator (FMI)

wSuspect Parameter Number (SPN)

eCode Count

1. Press and hold the MODE button to enter the settings menu.

2. Press either toggle button to cycle to the “DIAGCODE” option. Press MODE

to select.

3. More than one diagnostic code may be present. Press the toggle UP button

to see if more codes are present. Press MODE to select a code.

NOTICE

If the displayed code is an engine fault code, the CHECK ENGINE lamp will

blink. If the displayed code is an EPS fault code, the EPS lamp will blink.

FEATURES AND CONTROLS

4. Record the three (3) numbers displayed.

5. Press MODE to exit to the settings menu.

FEATURES AND CONTROLS

OPERATION

IMPORTANT INFORMATION

WARNING

Failure to operate the vehicle properly can result in a collision, loss of control,

accident or rollover, which may result in serious injury or death. Read and

understand all safety warnings outlined in the safety section of this owner’s

manual.

VEHICLE BREAK-IN PERIOD

The break-in period for your new vehicle is the first 25 hours of operation, or the

time it takes to use the first 2 full tanks of gasoline. No single action on your part

is as important as a proper break-in period. Careful treatment of a new engine

will result in more efficient performance and longer life for the engine. Perform

the following procedures carefully.

NOTICE

Excessive heat build-up during the first 3 hours of operation will damage close-

fitted engine parts and drive components. Do not operate at full throttle or high

speeds during the first 3 hours of use.

ENGINE AND DRIVETRAIN BREAK-IN

1. Fill the fuel tank with clean, fresh fuel. Review the fuel warnings in the

Refueling section.

2. Check the oil level. Add the recommended oil as needed to maintain the oil

level in the normal (safe) operating range.

3. Drive slowly at first. Select an open area that allows room to familiarize

yourself with vehicle operation and handling.

4. Vary throttle positions. Do not operate at sustained idle.

5. Perform regular checks on fluid levels, controls and areas outlined on the

daily pre-ride inspection checklist.

During the break-in period, change both the oil and the filter at 25 hours.

6. Check fluid levels of transmission and all gearcases after the first 25 hours of

operation and every 100 hours thereafter.

7. Pull only light loads.

OPERATION

PVT BREAK-IN (CLUTCHES/BELT)

A proper break-in of the clutches and drive belt will ensure a longer life and

better performance. Break in the clutches and belt by operating at slower

speeds during the break-in period as recommended. Pull only light loads. Avoid

aggressive acceleration and high speed operation during the break-in period.

If a belt fails, always clean any debris from the PVT intake and outlet duct and

from the clutch and engine compartments when replacing the belt.

FUELING

WARNING

Gasoline is highly flammable and explosive under certain conditions. Always

open the fuel cap slowly and fill the fuel tank slowly to prevent spillage. Do not

overfill the fuel tank. Leave space in the tank to allow for the fuel to expand.

Overflows or spilled gasoline could contact a hot engine or exhaust system

and cause a fire, which could result in serious injury or death. Do not allow

gasoline to contact hot components.

Review the fuel warnings. Use only the recommended fuel. See the Fuel

Recommendation section.

When refueling, always take the following precautions:

• Always exercise extreme caution whenever handling gasoline.

• Always turn off the engine when refueling.

• Always refuel the vehicle on level ground.

• Always refuel outdoors or in a well ventilated area free of any source of flame

or sparks.

• NEVER carry fuel or other flammable liquids on this vehicle. Failure to follow

this instruction could lead to serious burn injuries or death.

• Do not smoke or allow open flames or sparks in or near the area where

refueling is performed or where gasoline is stored.

• Do not overfill the tank. Do not fill the tank neck.

• If gasoline spills on your skin or clothing, immediately wash it off with soap

and water and change clothing.

NOTICE

Fuel can damage painted surfaces and plastic parts. If gasoline spills on any

part of the vehicle, immediately rinse it off with water or wipe it dry with a clean

cloth.

OPERATION

STARTING THE ENGINE

qOFF / Battery Isolator Function

wLIGHTS ON

ePOSITION LIGHTS ON

rSTART

1. Position the vehicle on a level surface outdoors or in a well-ventilated area.

2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab

doors are closed and latched when riding in this vehicle.

3. Place the transmission in PARK or NEUTRAL.

4. Disengage the park brake.

5. Apply the brakes. Do not press the throttle pedal while starting the engine.

6. Turn the ignition key to the START position. Engage the starter for a

maximum of five seconds. Release the key when the engine starts. Turn the

key to either LIGHTS ON or POSITION LIGHTS ON.

If the engine does not start within five seconds, return the ignition switch to

the OFF position and wait five seconds. Repeat steps 6 and 7 until the

engine starts.

7. Vary the engine RPM slightly with the throttle to aid in warm up until the

engine idles smoothly.

NOTICE

Operating the vehicle immediately after starting could cause engine damage.

Allow the engine to warm up for several minutes before operating the vehicle.

OPERATION

STOPPING THE ENGINE

1. Release the throttle pedal completely and brake to a complete stop.

2. Place the transmission in PARK.

3. Turn the key to the OFF position.

4. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

WARNING

A rolling vehicle can cause serious injury. Always place the transmission in

PARK before stopping the engine.

BRAKING

1. Release the throttle pedal completely.

NOTICE

When the throttle pedal is released completely and engine speed slows to near

idle, the vehicle has no engine braking.

2. Press on the brake pedal evenly and firmly. Practice starting and stopping

(using the brakes) until you're familiar with the controls.

OPERATION

PRE-RIDE INSPECTION

Failure to inspect and verify that the vehicle is in safe operating condition before

operating increases the risk of an accident. Always inspect the vehicle before

each use to make sure it's in safe operating condition.

ITEM REMARKS PAGE

Brake System/Pedal Travel Ensure proper operation page 109

Brake Fluid Ensure proper level page 109

Front Suspension Inspect, lubricate if necessary page 93

Rear Suspension Inspect, lubricate if necessary page 93

Steering Ensure free operation page 106

Tires Inspect condition and pressure page 114

Wheels/Fasteners Inspect, ensure fastener tightness page 114

Frame Nuts, Bolts, Fasteners Inspect, ensure tightness -

Fuel and oil Ensure proper levels page 96

Coolant Level Ensure proper level page 102

Coolant Hoses Inspect for leaks -

Throttle Pedal Ensure proper operation -

Indicator Lights/Switches Ensure proper operation page 48

Intake Screen Inspect, clean page 107

Air Filter Inspect, clean page 107

Headlamp Verify proper operation -

Brake Light/Tail Lamp Verify proper operation -

Seat Belt Check length of belt for damage, check latches

for proper operation

page 40

Cab Doors Check doors and latches for wear or damage. -

Grass and leaves Remove grass, leaves, foreign matter, and other

flammable material or debris, especially near

the exhaust system

OPERATION

ALL WHEEL DRIVE / REAR DIFFERENTIAL

SYSTEM

If your model is equipped with a lockable differential, you can choose to operate

with an open differential or a closed differential.

ENGAGING AWD

Press the top of the switch to engage All Wheel Drive (AWD). The 4X4 indicator

illuminates in the rider information center to indicate that the vehicle is in AWD.

When the AWD switch is on, the front gearcase will automatically engage any

time the rear wheels lose traction. When the rear wheels regain traction, the

front gearcase will automatically disengage. There is no limit to the length of

time the vehicle may remain in AWD.

Initially, the vehicle's electronic system will not enable the AWD until the engine

RPM is below 3100. Once enabled, the AWD remains enabled until the AWD

switch is turned off. If the switch is turned off while the front gearcase is moving,

it will not disengage until the rear wheels regain traction.

The Driveline Mode Switch has three positions: All Wheel

Drive (AWD), Differential Lock/Two Wheel Drive (2WD) and

Off (Turf Mode).

qAWD

w2WD

eTURF Mode

Engage the AWD before getting into conditions where front wheel drive may be

needed. If the rear wheels are spinning, release the throttle before switching to

AWD.

NOTICE

Switching to AWD while the rear wheels are spinning may cause severe drive

shaft and clutch damage. Always switch to AWD while the rear wheels have

traction or are at rest.

DISENGAGING AWD

Move the AWD switch to the center or bottom position to disengage AWD. If the

switch is turned off while the front hubs are driving, they will not release until the

rear wheels regain traction.

OPERATION

In some situations, the front gearcase may remain locked after turning the AWD

switch off. If this occurs, you may notice increased steering effort and some

vehicle speed restriction. Perform the following procedure to unlock the front

gearcase.

To disengage AWD, do the following:

1. Stop the vehicle.

2. Operate in reverse for at least 10 feet (3 m).

3. Stop completely.

4. Shift into low gear and drive forward.

5. If the front gearcase remains locked after following these instructions, see

your dealer or other qualified service person for service.

LOCKING THE DIFFERENTIAL

Move the rocker switch to the center position to lock the differential and operate

in two wheel drive (2WD). Locking the differential in slippery or low traction

conditions helps improve traction. When the rear differential is locked, both rear

wheels rotate at the same speed.

UNLOCKING THE DIFFERENTIAL (TURF MODE)

When operating in TURF mode, the inside rear wheel will rotate independently

from the outside wheel during turns. Operate in TURF mode only as needed to

protect smooth, level surfaces from tire damage. DO NOT operate in TURF

mode when climbing or descending hills, when sidehilling, or when operating on

uneven, loose, or slippery terrain such as sand, gravel, ice, snow, obstacles, and

water crossings. Always operate in AWD on these types of terrain.

WARNING

Operating in TURF mode (if equipped) when on sloped, uneven, or loose

terrain could cause loss of control and result in serious injury or death. One

rear wheel may slip and lose traction or may lift up and grab when it touches

the ground again.

Press the bottom of the switch to unlock the differential and allow the rear drive

wheels to operate independently (1WD). When the rear differential is unlocked,

the rear wheels can rotate at different speeds. Unlock the differential to make

maneuvering easier and minimize damage to turf.

NOTICE

Damage to the differential can occur if it is engaged while the vehicle is

traveling at high speeds or while the rear wheels are spinning. Slow the vehicle

to nearly stopped before engaging the differential.

OPERATION

WARNING

Never operate in TURF mode (if equipped) while operating on a hill or other

irregular terrain. Always move the AWD switch to AWD before ascending or

descending a hill.

HAULING CARGO

WARNING

Hauling cargo improperly can alter vehicle handling and may cause loss of

control or brake instability, which can result in serious injury or death.

WARNING

Always follow these precautions when hauling cargo:

• Never exceed the maximum weight capacity of the vehicle. When

determining the weight you are adding to the vehicle, include the weight of

the operator, passengers, non-factory installed accessories, loads in the

rack or box and the load on the trailer tongue. The combined weight of these

items must not exceed the maximum weight capacity.

• REDUCE SPEED AND ALLOW GREATER DISTANCES FOR BRAKING

WHEN HAULING CARGO.

• Always load the cargo box with the load as far forward and as low as

possible.

• When operating over rough or hilly terrain, reduce speed and cargo to

maintain stable driving conditions.

• Always operate the vehicle with extreme care when hauling or towing loads.

• Slow down and drive in the lowest gear available. When transporting heavy

loads and/or when towing, always operate the vehicle in low gear and have

ADC activated (if equipped).

OPERATION

WARNING

• SECURE ALL LOADS BEFORE OPERATING. Unsecured loads can create

unstable operating conditions, which could result in loss of control of the

vehicle.

• OPERATE ONLY WITH STABLE AND SAFELY ARRANGED LOADS. When

handling off-centered loads that cannot be centered, securely fasten the

load and operate with extra caution. Always attach the tow load to the hitch

point designated for your vehicle.

• HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS. Use

extreme caution when applying brakes with a loaded vehicle. Avoid terrain

or situations that may require backing downhill.

• USE EXTREME CAUTION when operating with loads that extend over the

rack sides. Stability and maneuverability may be adversely affected, causing

vehicle rollover.

• DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS.

Vehicle should never exceed 10 MPH (16 km/h) while towing a load on a

level grass surface. Vehicle speed should never exceed 5 MPH (8 km/h)

when towing loads in rough terrain, while cornering, or while ascending or

descending an incline.

Your POLARIS vehicle has been designed to carry or tow specific capacities.

Always read and understand the load distribution warnings listed on the warning

labels. The total load (operator, passengers, non-factory installed accessories,

cargo and weight on hitch) must not exceed the maximum weight capacity of the

vehicle. See the Safety chapter for details.

WARNING

Driving with passengers in the cargo box can result in severe injury or death.

Never allow passengers to ride in the cargo box. Passengers must always ride

in the cab with seat belts fastened securely.

BELT LIFE

To extend belt life, use low gear when hauling or towing heavy cargo.

OPERATION

TOWING LOADS

Towing improperly can alter vehicle handling and may cause loss of control or

brake instability. Always follow these precautions when towing:

1. Never load more than 220 (100 kg)tongue weight on the towing bracket.

2. When transporting heavy loads and/or when towing, always operate the

vehicle in low gear and have ADC activated (if equipped).

3. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

Towing a trailer increases braking distance.

4. Do not tow more than the recommended weight for the vehicle. See the

towing capacity chart below and the Specifications section for towing values.

5. Attach a trailer to the trailer hitch bracket only. Do not attach a trailer to any

other location, which could result in loss of control of the vehicle.

6. Avoid towing loads on an incline. If it’s unavoidable, choose the smallest

incline available, operate with extreme caution, and drive straight up or down

the incline.

TOTAL TOWED LOAD

WEIGHT (LEVEL

GROUND)

TOTAL HITCH

VERTICAL WEIGHT

MAXIMUM TOWING

SPEED

1500

(680 kg)

220

(100 kg)

10 MPH

(16 km/h)

NOTE

To extend belt life, use low gear when hauling or towing heavy cargo.

OPERATION

DUMPING THE CARGO BOX

1. Select a level site to dump the cargo box. Do not attempt to dump or unload

the vehicle while parked on an incline.

2. Apply the brakes. Place the transmission in PARK and engage parking

brake.

3. Ensure that the cargo is positioned evenly or toward the front of the cargo

box.

4. Release the tailgate by pulling up on the tailgate latch.

WARNING

If the weight distribution on the box is located toward the rear of the box when

the release lever is pulled forward, the box may dump unexpectedly and cause

serious injury to the operator or bystanders. Never operate the dump lever

without ensuring that the load is positioned evenly or at the front of the box.

OPERATION

5. Stand clear and pull one of the cargo box release levers upward. Lift the front

of the cargo box to dump the cargo.

6. Lower the cargo box and push down securely to latch.

WARNING

Operating the vehicle while the cargo box is raised could result in severe injury.

The box could close unexpectedly and cause injury to the driver or passenger.

The rear tires could also catch the rear of a raised box, damaging the vehicle

and creating hazardous driving conditions. Never operate this vehicle with the

cargo box in the raised position.

TOWING

WARNING

Towing improperly can alter vehicle handling and may cause loss of control or

brake instability.

This General vehicle can tow vehicles ONLY of equal or lesser size and weight.

When towing a disabled vehicle, place the disabled vehicle's transmission in

neutral. Do not operate the vehicle faster than 16 km/h (10 MPH) when towing.

TOWING A GENERAL

Towing this vehicle is not recommended. Always transport the vehicle on a

trailer or flatbed with all four wheels off the ground. See the Transporting the

Vehicle section for details.

If towing a disabled vehicle is unavoidable, place the disabled vehicle’s

transmission in neutral. Tow the shortest distance possible. Do not operate

faster than 16km/h (10MPH).

qFront Tow Loop

OPERATION

DRIVING PROCEDURE

1. Wear a helmet, eye protection, gloves, long-sleeve shirt, long pants and

over-the-ankle boots.

2. Perform the pre-ride inspection. See the Pre-Ride Inspection section for

details.

3. Sit in the driver’s seat and fasten the seat belt.

4. Always make sure all cab doors are closed and latched when riding in this

vehicle.

5. Place the transmission in PARK.

6. Depress brake pedal.

7. Start the engine.

8. Apply the service brakes and shift the transmission into gear.

9. Check your surroundings and determine your path of travel.

10. Release the parking brake (if equipped).

11. Keeping both hands on the steering wheel, slowly release the brakes and

slowly depress the throttle with your right foot to begin driving.

12. Drive slowly. Practice maneuvering and using the throttle and brakes on level

surfaces.

13. Do not carry a passenger until you have at least two hours of driving

experience with this vehicle.

OPERATION

DRIVING WITH A PASSENGER

• Perform the pre-ride inspection.

• Make sure all passengers are at least 12 years of age and tall enough to

comfortably and safely sit in a passenger seat with the seat belt secured, put

both feet on the floor and grasp the hand hold.

• Make sure all passengers are wearing helmets, eye protection, gloves, long-

sleeve shirt, long pants and over-the-ankle boots.

• Make sure all cab nets or doors (if equipped) are properly secured.

• Do not carry more than the recommended number of passengers for your

vehicle.

• Allow a passenger to ride only in a passenger seat.

• Slow down. Always travel at a speed appropriate for your skills, your

passengers’ skills, and operating conditions. Avoid unexpected or aggressive

maneuvers that could cause discomfort or injury to a passenger.

• Vehicle handling may change with a passenger and/or cargo on board. Allow

more time and distance for braking.

• Always follow all operating guidelines as outlined on safety labels and in this

manual.

DRIVING OVER OBSTACLES

Follow these precautions when operating over obstacles:

• Always check for obstacles before operating in a new area.

• Look ahead and learn to read the terrain. Be constantly alert for hazards such

as logs, rocks and low hanging branches.

• Travel slowly and use extra caution when operating on unfamiliar terrain. Not

all obstacles are immediately visible.

• Move the gear selector to Low Gear, if needed.

• Avoid operating over large obstacles such as large rocks and fallen trees. If

unavoidable, use extreme caution and operate slowly.

• Always have all passengers dismount and move away from the vehicle before

operating over an obstacle that could cause a rollover.

DRIVING ON SLIPPERY SURFACES

WARNING

Skidding or sliding can cause loss of control or rollover (if tires regain traction

unexpectedly). When operating on slippery surfaces such as ice or loose

gravel, reduce speed and use extra caution to reduce the chance of skidding or

sliding out of control. Do not operate on excessively slippery surfaces.

OPERATION

When driving on slippery surfaces such as wet trails, loose gravel, or ice, be

alert for the possibility of skidding and sliding. Follow these precautions when

encountering slippery conditions:

• Do not operate on excessively rough, slippery or loose terrain.

• Slow down before entering slippery areas.

• Maintain a high level of alertness, reading the trail and avoiding quick, sharp

turns, which can cause skids.

• Engage all-wheel drive before wheels begin to lose traction.

NOTICE

Severe damage to the drive train may occur if the AWD is engaged while the

wheels are spinning. Always allow the wheels to stop spinning before engaging

AWD.

• Correct a skid by turning the steering wheel in the direction of the skid. Never

apply the brakes during a skid.

DRIVING UPHILL

Whenever traveling uphill, follow these precautions:

• Avoid excessively steep hills.

• Always travel straight uphill.

• Keep both feet on the floor.

• Always check the terrain carefully before ascending any hill. Never climb hills

with excessively slippery or loose surfaces.

• Proceed at a steady rate of speed and throttle opening. Never open the

throttle suddenly.

• Never go over the crest of a hill at high speed. An obstacle, a sharp drop, or

another vehicle or person could be on the other side of the hill.

DRIVING ON A SIDEHILL

Driving on a sidehill is not recommended. Improper procedure could cause loss

of control or rollover. Avoid crossing the side of any hill unless absolutely

necessary.

If crossing a sidehill is , follow these precautions:unavoidable

OPERATION

1. Engage all-wheel drive

2. Drive slowly and use extreme caution.

3. If the vehicle begins to roll over, or if it feels as if it may roll over, immediately

turn downhill.

4. Avoid obstacles and changes in terrain that may lower or raise one side of

the vehicle or cause the vehicle to slide.

5. If the vehicle begins to slide downhill, immediately turn downhill to stop the

slide, or stop the vehicle and maneuver slowly and carefully until the vehicle

can be driven straight downhill.

DRIVING DOWNHILL

When driving downhill, follow these precautions:

1. Avoid excessively steep hills.

2. Always check the terrain carefully before descending a hill. Never drive on

hills with excessively slippery or loose surfaces.

3. Slow down. Never travel down a hill at high speed.

4. Always descend a hill with the transmission in forward gear. Never descend

a hill with the transmission in neutral.

5. Avoid traveling down a hill at an angle, which would cause the vehicle to lean

sharply to one side. Travel straight downhill.

6. Apply the brakes to aid in slowing.lightly

DRIVING THROUGH WATER

Your vehicle can operate through water up to a maximum recommended depth

equal to the floorboards.

NOTE

If your vehicle becomes immersed or is operated in water that exceeds the

floor level, service is required before starting the engine. Your dealer can

provide this service. If it's impossible to bring the vehicle in before starting the

engine, perform the service outlined in the Spark Arrester section, and take the

vehicle in for service at the first opportunity.

Follow these procedures when operating through water:

1. Determine water depths and current before entering water.

2. Choose a crossing where both banks have gradual inclines.

3. Proceed slowly, avoiding rocks and obstacles.

OPERATION

4. Avoid operating through deep or fast-flowing water.

WARNING

The large tires on your vehicle may cause the vehicle to float in deep or fast-

flowing water, which could result in loss of control and lead to serious injury or

death. Never cross deep or fast-flowing water with your vehicle

5. After leaving water, always dry the brakes by applying light pressure to the

pedal repeatedly until braking action is normal.

NOTE

After running your vehicle in water, it's critical that you perform the services

outlined in the Periodic Maintenance Chart section. Give special attention to

engine oil, transmission oil, front and rear gearcases (if equipped), and all

grease fittings.

DRIVING IN REVERSE

Follow these precautions when operating in reverse:

• Always check for obstacles or people behind the vehicle. Always inspect left

and right fields of vision before backing.

• Always avoid backing downhill.

• Back slowly.

• Apply the brakes lightly for stopping.

• Avoid turning at sharp angles.

• Never open the throttle suddenly.

PARKING THE VEHICLE

1. Stop the vehicle on a level surface. When parking inside a garage or other

structure, be sure that the structure is well ventilated and that the vehicle is

not close to any source of flame or sparks, including any appliance with pilot

lights.

2. Place the transmission in PARK.

3. Turn the engine off.

4. Engage the parking brake (if equipped).

5. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

6. Remove the ignition key to prevent unauthorized use.

OPERATION

PARKING ON AN INCLINE

Avoid parking on an incline if possible. If it's unavoidable, follow these

precautions:

1. Apply the brakes.

2. Place the transmission in PARK.

3. Engage the parking brake.

4. Turn the engine off.

5. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

6. Block the rear wheels on the downhill side.

BOARDING AND EXITING THE VEHICLE

• Never try to climb onto or exit the vehicle while it is moving.

• Do not exit the vehicle by jumping off.

• Always face the vehicle when boarding or exiting.

• Do not grab controls as hand supports. This may cause inadvertent machine

movements.

• Always keep vehicle steps and flooring clean to prevent slippery conditions.

OPERATION

WINCH GUIDE

WINCH SAFETY

These safety warnings and instructions apply if your vehicle came equipped with

a winch or if you choose to add an accessory winch to your vehicle.

WARNING

Improper winch use can result in SEVERE INJURY or DEATH. Always follow

all winch instructions and warnings in this manual.

Your winch may have a cable made of either wire rope or specially designed

synthetic rope. The term “winch cable” will be used for either unless noted

otherwise.

WINCH SAFETY PRECAUTIONS

1. Read all sections of this manual.

2. Never use alcohol or drugs before or while operating the winch.

3. Never allow children under 16 years of age to operate the winch.

4. Always wear eye protection and heavy gloves when operating the winch.

5. Always keep body, hair, clothing and jewelry clear of the winch cable, fairlead

and hook when operating winch.

6. Never attempt to “jerk” a load attached to the winch with a moving vehicle.

See the section on page 84.Shock Loading

7. Always keep the area around the vehicle, winch, winch cable, and load clear

of people (especially children) and distractions while operating the winch.

8. Always turn the vehicle ignition power OFF when it and the winch are not

being used.

9. Always be sure that at least five (5) full turns of winch cable are wrapped

around the winch drum at all times. The friction provided by this wrapped

cable allows the drum to pull on the winch cable and move the load.

10. Always apply your vehicle’s park brake and/or park mechanism to hold the

vehicle in place during winching. Use wheel chocks if needed.

11. Always align the vehicle and winch with the load directly in front of the

vehicle as much as possible. Avoid winching with the winch cable at an angle

to the winching vehicle’s centerline whenever possible.

WINCH GUIDE

12. If winching at an angle is unavoidable, follow these precautions:

a. Look at the winch drum occasionally. Never let the winch cable “stack” or

accumulate at one end of the winch drum. Too much winch cable at one

end of the winch drum can damage the winch and the winch cable.

b. If stacking occurs, stop winching. Follow step 15 of Winch Operation to

feed and rewind the cable evenly before continuing the winch operation.

13. Never winch up or down at sharp angles. This can destabilize the winching

vehicle and possibly cause it to move without warning.

14. Never attempt to winch loads that weigh more than the winch’s rated

capacity.

15. The winch motor may become hot during winch use. If you winch for more

than 45 seconds, or if the winch stalls during operation, stop winching and

permit the winch to cool down for 10 minutes before using it again.

16. Never touch, push, pull or straddle the winch cable while winching a load.

17. Never let the winch cable run through your hands, even if wearing heavy

gloves.

18. Never release the clutch on the winch when the winch cable is under load.

19. Never use the winch for lifting or transporting people.

20. Never use the winch to hoist or suspend a vertical load.

21. Always inspect your winch and winch cable before each use.

WINCH GUIDE

22. Never winch the hook fully into the winch. This can cause damage to winch

components.

23. Unplug the remote control from the vehicle when the winch is not in use to

prevent inadvertent activation and use by unauthorized persons.

24. Never grease or oil the winch cable. This will cause the winch cable to collect

debris that will shorten the life of the cable.

WINCH OPERATION

Read the Winch Safety Precautions in the preceding pages before using your

winch.

TIP

Consider practicing the operation and use of your winch before you actually

need to use it in the field.

WARNING

Improper winch use can result in SEVERE INJURY or DEATH. Always follow

all winch instructions and warnings in this manual.

Each winching situation is unique.

• Take your time to think through the winching you are about to do.

• Proceed slowly and deliberately.

• Never hurry or rush during winching.

• Always pay attention to your surroundings.

• You may need to change your winching strategy if it is not working.

• Always remember that your winch is very powerful.

• There are simply some situations that you and your winch will not be able to

deal with. Do not be afraid to ask others to help when this happens.

1. Always inspect the vehicle, winch, winch cable and winch controls for any

signs of damage or parts in need of repair or replacement before each use.

Pay particular attention to the first 3 ft (1 m) of winch cable if the winch is

being used (or has been used) for lifting an accessory plow assembly.

Promptly replace any worn or damaged cable.

2. Never operate a winch or a vehicle in need of repair or service.

3. Always apply your vehicle’s park brake and/ or park mechanism to hold the

vehicle in place during winching. Use wheel chocks if needed.

WINCH GUIDE

4. Always use the hook strap when handling the hook.

WARNING

Never put your fingers into the hook. This could lead to SEVERE INJURY.

• Attach the hook itself onto the load or use a tow strap or chain to secure

the load to the winch cable.

TIP

A “tow strap” is NOT intended to stretch. A “recovery strap” is designed to

stretch.

WINCH GUIDE

WARNING

Never use a recovery strap when winching due to the excessive energy that

can be released if the winch cable breaks. This can result in SEVERE INJURY

or DEATH. See the section on page 84.Shock Loading

• Never hook the winch cable back onto itself. This will damage the winch

cable and may result in winch cable failure.

WARNING

Replace the winch cable at the first sign of damage to prevent SEVERE

INJURY or DEATH in the event of failure. For your safety, always replace

POLARIS winch parts (including the cable) with genuine POLARIS

replacement parts available at your authorized POLARIS dealer, or other

qualified dealer.

• If possible, keep the winch cable aligned with the centerline of the

winching vehicle. This will help the spooling of the winch cable and reduce

the load on the fairlead.

• If freeing a stuck vehicle by attaching to a tree, use an item such as a tow

strap to avoid damaging the tree during winch operation. Sharp cables and

chains can damage and even kill trees. Please remember to Tread

Lightly® (treadlightly.org).

• Before operating the winch, be sure that the safety latch on the winch

cable hook is fully seated when the load is attached.

• Never operate your winch with a damaged hook or latch. Always replace

damaged parts before using the winch.

5. Never remove the hook strap from the hook.

6. Release the winch clutch and pull out the winch cable.

7. Pulling out as much cable as possible maximizes the winch’s pulling

capacity. Always be sure that at least five (5) full turns of winch cable are

wrapped around the winch drum at all times. The friction provided by this

wrapped cable allows the drum to pull on the winch cable and move the load.

WINCH GUIDE

8. Read and adhere to the following information for winch damping to ensure

safe winch use.

a. In order to absorb energy that could be released by a winch cable failure,

always place a “damper” on the winch cable. A damper can be heavy

jacket, tarp, or other soft, dense object. A damper can absorb much of the

energy released if a winch cable breaks when winching. Even a tree limb

can help as a damper if no other items are available to you.

b. Lay the damper on top of the mid-point of the winch cable length that is

spooled out.

c. On a long pull, it may be necessary to stop winching so that the damper

can be repositioned to the new mid-point of the winch cable. Always

release the tension on the winch cable before repositioning the damper.

d. Avoid being directly in line with the winch cable whenever possible. Also,

never permit others to stand near or in line with the winch cable during

winch operation.

9. Never hook the winch cable back onto itself. This will damage the winch

cable and may result in winch cable failure.

10. Never use straps, chains or other rigging items that are damaged or worn.

11. The ONLY time a winch-equipped vehicle should be moving when using the

winch is when that vehicle itself is stuck. The winch equipped vehicle should

NEVER be in motion to “shock” load the winch cable in an attempt to move a

second stuck vehicle. See the Shock Loading section on page 84. For your

safety, always follow these guidelines when winching a vehicle free:

a. Release the winch clutch and spool out the necessary length of winch

cable.

b. Align the winch cable as close as possible to the winching vehicle’s

centerline.

c. Attach the winch cable hook to the anchor point or the stuck vehicle’s

frame following instructions in this manual.

d. Re-engage the clutch on the winch.

e. Slowly winch in the slack in the winch cable.

f. Select the proper vehicle gear to propel the stuck vehicle in the direction

of winching.

g. Shift to the lowest gear available on the stuck vehicle.

h. Slowly and carefully apply vehicle throttle and winch together to free the

vehicle.

i. Stop winching as soon as the stuck vehicle is able to propel itself without

the help of the winch.

WINCH GUIDE

j. Detach the winch cable hook.

k. Rewind the winch cable evenly back onto the winch drum following the

instructions in this manual.

12. Never attempt to winch another stuck vehicle by attaching the winch cable to

a suspension component, brush guard, bumper or cargo rack. Vehicle

damage may result. Instead, attach the winch to a strong portion of the

vehicle frame or hitch.

13. Extensive winching will run down the battery on the winching vehicle. Let the

winching vehicle’s engine run while operating the winch to prevent the

battery from running low if winching for long periods.

14. The winch motor may become hot during winch use. If you winch for more

than 45 seconds, or if the winch stalls during operation, stop winching and

permit the winch to cool down for 10 minutes before using it again.

15. After winching is complete, especially if winching at an angle, it may be

necessary to re-distribute the winch cable across the winch drum. You will

need an assistant to perform this task.

a. Release the clutch on the winch.

b. Feed out the winch cable that is unevenly bunched up in one area.

c. Re-engage the winch clutch.

d. Have an assistant pull the winch cable tightly with about 100 lb (45 kg) of

tension using the hook strap.

e. Slowly winch the cable in while your assistant moves the end of the winch

cable back and forth horizontally to evenly distribute the winch cable on

the drum.

f. Doing this reduces the chances of the winch cable “wedging” itself

between lower layers of winch cable.

WINCH CABLE CARE

WARNING

Use of worn or damaged cable could lead to sudden failure and SEVERE

INJURY.

For your safety, always replace POLARIS winch parts (including the cable) with

genuine POLARIS replacement parts available at your authorized POLARIS

dealer, or other qualified person.

WINCH GUIDE

1. Always inspect your winch before each use. Inspect for worn or loose parts

including mounting hardware. Never use the winch if any part needs repair or

replacement.

2. Always inspect your winch cable before each use. Inspect for worn or kinked

winch cable.

A kinked winch cable made of wire rope

is shown at right. Even after being

“straightened out,” this cable has

already been permanently and severely

damaged. Promptly discontinue use of

a winch cable in this condition.

A kinked winch cable made of wire rope

that has been “straightened out” is

shown at right. Even though it may look

usable, the cable has been permanently

and severely damaged. It can no longer

transmit the load that it could prior to

kinking. Promptly discontinue use of a

winch cable in this condition.

A winch cable made of synthetic rope

should be inspected for signs of fraying.

Replace the cable if fraying is observed

(shown below). Promptly discontinue

use of a winch cable in this condition.

Also replace the winch cable if there are

fused or melted fibers. Such an area of

the synthetic rope will be stiff and

appear smooth or glazed. Promptly

discontinue use of a winch cable in this

condition.

SHOCK LOADING

WARNING

Your winch cable is very strong but it is NOT designed for dynamic, or “shock”

loading. Shock loading may tension a winch cable beyond its strength and

cause the cable to break. The end of a broken winch cable under such high

loading can cause SEVERE INJURY or DEATH to you and other bystanders.

Winch cables are designed to NOT absorb energy. This is true of both wire-rope

and synthetic-rope winch cables.

WINCH GUIDE

1. Never attempt to “jerk” a load with the winch. For example, never take up

slack in the winch cable by moving the winching vehicle in an attempt to

move an object. This is a dangerous practice. It generates high winch cable

loads that may exceed the strength of the cable. Even a slowly moving

vehicle can create large shock loads in a winch cable.

WARNING

SEVERE INJURY or DEATH can result from a broken winch cable.

2. Never quickly turn the winch ON and OFF repeatedly (“jogging”). This puts

extra load on the winch, winch cable, and generates excessive heat from the

motor. This is a form of shock loading.

3. Never tow a vehicle or other object with your winch. Towing an object with a

winch produces shock loading of the cable even when towing at slow

speeds. Towing from a winch also positions the towing force high on the

vehicle. This can cause instability of the vehicle and possibly lead to an

accident.

4. Never use recovery straps with your winch. Recovery straps are designed to

stretch and can store energy. This stored energy in the recovery strap is

released if a winch cable fails making the event even more hazardous.

Similarly, never use elastic “bungie” cords for winching.

5. Never use the winch to tie down a vehicle to a trailer or other transportation

vehicle. This type of use also causes shock loading that can cause damage

to the winch, winch cable, or vehicles used.

Your winch cable is designed and tested to withstand the loads produced

by the winch motor when operated from a stationary vehicle. Always

remember that the winch and winch cable are NOT designed for shock

WINCH MAINTENANCE AND SERVICE SAFETY

WARNING

Improper or lack of winch maintenance and service could lead to SEVERE

INJURY or DEATH. Always follow all winch instructions and warnings in this

manual.

1. Always inspect your winch before each use. Inspect for worn or kinked winch

cable. Also inspect for worn or loose parts including mounting hardware.

2. Permit your winch motor to cool down prior to servicing your winch.

3. Never work on your winch without first disconnecting the battery connections

to prevent accidental activation of the winch.

WINCH GUIDE

4. For your safety, always replace POLARIS winch parts (including the cable)

with genuine POLARIS replacement parts available at your authorized

POLARIS dealer, or other qualified person.

5. Some winch models use wire rope as the winch cable. Other winches use a

specially designed synthetic rope as the winch cable.

6. Never replace a synthetic-rope winch cable with a consumer-grade polymer

rope such as can be purchased in a hardware store. Although they may look

similar, they are NOT alike. A polymer rope not designed for winch use will

stretch and store excessive energy when winching.

WARNING

Failure of a stretched rope under winching conditions will release all of the

stored energy. This will increase the chances of SEVERE INJURY or DEATH.

WINCH GUIDE

EMISSION CONTROL SYSTEMS

NOISE EMISSION CONTROL SYSTEM

Do not modify the engine, intake or exhaust components, as doing so may affect

compliance with governmental noise level requirements.

SPARK ARRESTER

Your POLARIS vehicle has a spark arrester that was designed for on-road and

off-road operation. It is required that this spark arrester remain installed and

functional when the vehicle is operated.

CRANKCASE EMISSION CONTROL SYSTEM

This engine is equipped with a closed crankcase system. Blow-by gases are

forced back to the combustion chamber by the intake system. All exhaust gases

exit through the exhaust system.

EXHAUST EMISSION CONTROL SYSTEM

Exhaust emissions are controlled by engine design. An electronic fuel injection

(EFI) system controls fuel delivery. The engine and EFI components are set at

the factory for optimal performance and are not adjustable.

ELECTROMAGNETIC INTERFERENCE

This vehicle complies with the EMC requirements of Regulation (EU) No. 2015/

208 Annex XV..

Non-ionizing Radiation: This vehicle emits some electromagnetic energy.

People with active or non-active implantable medical devices (such as heart

monitoring or controlling devices) should review the limitations of their device

and the applicable electromagnetic standards and directives that apply to this

vehicle.

EMISSION CONTROL SYSTEMS

MAINTENANCE

PERIODIC MAINTENANCE CHART

Any qualified repair shop or person may maintain, replace or repair the emission

control devices or systems on your vehicle. An authorized dealer can perform

any service that may be necessary for your vehicle. POLARIS also recommends

POLARIS parts for emissions-related service, however equivalent parts can be

used.

It is a potential violation of the Clean Air Act if a part supplied by an aftermarket

parts manufacturer reduces the effectiveness of the vehicle’s emission controls.

Tampering with emission controls is prohibited by federal law.

Owners are responsible for performing the scheduled maintenance identified in

this owner’s manual.

Careful periodic maintenance will help keep your vehicle in the safest, most

reliable condition. Inspection, adjustment and lubrication of important

components are explained in the periodic maintenance chart.

Inspect, clean, lubricate, adjust and replace parts as necessary. When

inspection reveals the need for replacement parts, genuine POLARIS parts are

available from your POLARIS dealer, or other qualified person. Equivalent parts

may be used for emissions-related service.

Service and adjustments are important for proper vehicle operation. If you’re not

familiar with safe service and adjustment procedures, a qualified dealer can

perform these operations.

Vehicles subjected to heavy or severe use patterns must be inspected and

serviced more frequently.

SEVERE USE DEFINITION

• Frequent immersion in mud, water or sand

• Frequent or prolonged operation in dusty environments

• Short trip cold weather operation

• Racing or race-style high RPM use

• Prolonged low speed, heavy load operation

• Extended idle

Pay special attention to the oil level. A rise in oil level during cold weather can

indicate contaminants collecting in the oil sump or crankcase. Change oil

immediately if the oil level begins to rise. Monitor the oil level, and if it continues

to rise, discontinue use and determine the cause. Your dealer can assist.

MAINTENANCE

MAINTENANCE CHART KEY

SYMBOL DESCRIPTION

XU Perform these procedures more often for vehicles subjected to severe use.

DHave an authorized POLARIS dealer or other qualified person perform these

services.

WARNING

Improperly performing the procedures marked with a could result inD

component failure and lead to serious injury or death. Have an authorized

POLARIS dealer or other qualified person perform these services.

Perform all services at whichever maintenance interval is reached first. Record

maintenance and service in the Maintenance Log.

ITEM

MAINTENANCE INTERVAL

(WHICHEVER COMES FIRST)

REMARKSHOURS CLNDR

MILES

(KM)

Steering - Pre-Ride -

Make adjustments as needed.

See the steps in the Pre-Ride

Checklist section.

Front-suspension - Pre-Ride -

Rear-suspension - Pre-Ride -

Tires - Pre-Ride -

Brake fluid level - Pre-Ride -

Brake pedal travel - Pre-Ride -

Brake systems - Pre-Ride -

Wheels /fasteners - Pre-Ride -

Frame fasteners - Pre-Ride -

Engine Oil Level - Pre-Ride -

PVT intake screen - Daily - Inspect; clean often

Coolant - Daily - Check level

XU Power steering unit

(if equipped)

- Daily - Inspect daily; clean often

Head lamp / tail

lamp -Daily -Verify proper operation

Spray Suppression

Valances -Daily -Clean regularly

MAINTENANCE

ITEM

MAINTENANCE INTERVAL

(WHICHEVER COMES FIRST)

REMARKSHOURS CLNDR

MILES

(KM)

XU Air filter - Weekly -Inspect; replace as needed

DBrake pad wear 10 H Monthly 100

(160) Inspect periodically

Battery 25 H Monthly 200

(320) Check terminals; clean; test

Fuel System 25 H Monthly 200

(320)

Inspect; cycle key to pressurize

fuel pump; check lines and fittings

for leaks and abrasion

XU Demand drive fluid

(extreme use) 25 H Monthly -

Change fluid every 25 hours if

subjected to extreme use. See the

Front Gearcase section for

details.

Demand drive fluid

(front gearcase) (if

equipped)

25 H Monthly - Perform a break-in oil level check

XU Transmission oil 25 H Monthly - Perform a break-in oil level check

XU Engine oil change

(break-in) 25 H - 500

(800) Perform a break-in oil change

XU Shock Absorbers 50 H - 500

(800)

Inspect for leaks, loose joints, and

wear

XU Seat Adjuster 50 H Monthly 500

(800)

Lubricate long-threaded bolt and

all pivot pins

XU General lubrication 50 H 3 M 500

(800)

Lubricate all fittings, pivots,

cables, etc.

Shift Linkage 50 H 6 M 500

(800) Inspect, lubricate, adjust

DSteering 50 H 6 M 500

(800) Lubricate

XU Front and Rear

Stabilizer Bars 50 H 6 M 500

(800) Lubricate

DThrottle Pedal 50 H 6 M 500

(800)

Inspect for free movement;

replace pedal as needed

Throttle body air

intake ducts/flange 50 H 6 M 500

(800)

Inspect ducts for proper sealing/

air leaks

Drive belt 50 H 6 M 500

(800)

Inspect; adjust; replace as

needed

Cooling system (if

applicable) 50 H 6 M 500

(800)

Inspect coolant strength

seasonally; pressure test system

yearly

MAINTENANCE

ITEM

MAINTENANCE INTERVAL

(WHICHEVER COMES FIRST)

REMARKSHOURS CLNDR

MILES

(KM)

XU Radiator (if

applicable) 50 H 6 M 500

(800) Inspect; clean external surfaces

XU Oil lines and

fasteners 50 H 6 M 1000

(1600) Inspect for leaks and loose fittings

XU Engine oil and filter

change 100 H 6 M 1000

(1600) Change the oil and filter

XU Front gearcase oil 100 H 12 M 1000

(1600) Change fluid

XU Transmission oil 100 H 12 M 1000

(1600) Change fluid

DFuel System 100 H 12 M 1000

(1600)

Cycle key to pressurize fuel

pump; check for leaks at fill cap,

fuel lines/rail and fuel pump;

replace lines every 2 years

XU Cooling Hoses (if

applicable) 100 H 12 M 1000

(1600) Inspect for leaks

XU Engine mounts 100 H 12 M 1000

(1600) Inspect

Exhaust muffler

/pipe 100 H 12 M 1000

(1600) Inspect

Drive shafts 100 H 12 M 1000

(1600) Remove and grease

DSpark plug 100 H 12 M 1000

(1600) Inspect; replace as needed

XU Wiring 100 H 12 M 1000

(1600)

Inspect for wear, routing, security;

apply dielectric grease to

connectors subjected to water,

mud, etc.

Clutches (drive and

driven) 100 H 12 M 1000

(1600) Inspect; clean; replace worn parts

DFront wheel

bearings 100 H 12 M 1000

(1600) Inspect; replace as needed

DBrake fluid 200 H 24 M 2000

(3200) Change every two years

Ratcheting cam

chain tensioner 200 H - 2000

(3200) Check; adjust as needed

Suspension

bushings 250 H 24 M 2000

(3200) Inspect; replace if necessary

XU Shock Absorbers 250 H - 2500

(4000) Replace or rebuild

MAINTENANCE

ITEM

MAINTENANCE INTERVAL

(WHICHEVER COMES FIRST)

REMARKSHOURS CLNDR

MILES

(KM)

Spark arrester 300 H 36 M 3000

(4800) Clean out

DValve clearance - - 5000

(8000) Inspect; adjust as needed

XU Coolant - 60 M - Change coolant

DToe adjustment -Inspect periodically; adjust when

parts are replaced

Auxiliary brake (if

equipped) -Inspect daily; adjust as needed

Headlight aim -Adjust as needed

LUBRICATION RECOMMENDATIONS

Check and lubricate all components at the intervals outlined in the Periodic

Maintenance Chart section, or more often under severe use, such as wet or

dusty conditions. Items not listed in the chart should be lubricated at the general

lubrication interval.

ITEM LUBE METHOD

Engine Oil PS-4 5W-50 4-Cycle Oil Add to proper level on dipstick.

See page 96.

Brake Fluid DOT 4 Brake Fluid Maintain level between fill

lines.

See page 109.

Main Gearcase Oil

(Transmission)

AGL Gearcase Lubricant &

Transmission Fluid

See page 100.

Front Gearcase Oil Demand Drive Fluid See page 100 and page 100.

Front Prop Shaft Yoke U-Joint Grease Locate fittings and grease (3

pumps maximum).

Front and Rear Stabilizer Bar

Bushings

All Season Grease or grease

conforming to NLGI No. 2

Grease one fitting on each side

of the vehicle.

MAINTENANCE

FUEL

WARNING

Gasoline is highly flammable and explosive under certain conditions.

• Always exercise extreme caution whenever handling gasoline.

• Always refuel outdoors or in a well-ventilated area.

• Always turn off the engine before refueling.

• Do not overfill the tank. Do not fill the tank neck.

• Do not smoke or allow open flames or sparks in or near the area where

refueling is performed or where gasoline is stored.

• If gasoline spills on your skin or clothing, immediately wash it off with soap

and water and change clothing.

• Never start the engine or let it run in an enclosed area. Engine exhaust

fumes are poisonous and can cause loss of consciousness or death in a

short time.

WARNING

The engine exhaust from this product contains chemicals known to cause

cancer, birth defects or other reproductive harm. Operate this vehicle only

outdoors or in well-ventilated areas.

FUEL RECOMMENDATION

Compatible Fuel Types:

• E5

• E10

MAINTENANCE

ENGINE OIL

Always check and change the oil at the intervals outlined in the Periodic

Maintenance Chart. Always use the recommended engine oil. Always change

the oil filter whenever changing oil.

Pay special attention to the oil level. A rise in oil level during cold weather can

indicate contaminants collecting in the oil sump or crankcase. Change oil

immediately if the oil level begins to rise. Monitor the oil level, and if it continues

to rise, discontinue use and determine the cause. Your dealer can assist.

WARNING

Vehicle operation with insufficient, deteriorated, or contaminated engine oil will

cause accelerated wear and may result in engine seizure, accident and injury.

Always perform the maintenance procedures as outlined in the Periodic

Maintenance Chart.

OIL RECOMMENDATIONS

POLARIS recommends the use of POLARIS PS-4 5W-50 4-Cycle Oil or a

similar oil. Refer to the Specifications section for capacities.

Oil may need to be changed more frequently if POLARIS PS-4 engine oil is not

used. Follow the manufacturer's recommendations for ambient temperature

operation. See the Polaris Products section for part numbers.

NOTICE

Mixing brands or using a non-recommended oil may cause serious engine

damage. Always use the recommended oil. Never substitute or mix oil brands.

MAINTENANCE

OIL CHECK

Always check the oil when the engine is cold. If the engine is hot when the oil is

checked, the level will appear to be overfull.

CAUTION

Always remove all cargo from the cargo box before lifting the box to access

engine components.

Access the oil fill cap, dipstick and filter under the cargo box.

1. Remove all cargo from the cargo box. See page 69.

2. Position the vehicle on a level surface.

3. Place the transmission in PARK.

4. Stop the engine.

5. Stand clear and pull up on the cargo box release lever. Lift the front of the

cargo box.

6. Remove the dipstick. Wipe it dry with a clean cloth.

7. Reinstall the dipstick completely. Remove the dipstickqand check the oil

level.

8. Remove the oil fill cap wto add the recommended oil as needed. Maintain

the oil level between the minimum and maximum marks on the dipstick. Do

not overfill.

9. Reinstall the fill cap . Reinstall the dipstick.

10. Lower the cargo box and push down securely to latch.

MAINTENANCE

OIL AND FILTER CHANGE

Always change the oil and filters at the intervals outlined in the Periodic

Maintenance Chart section. Always change the oil filter whenever changing oil.

The crankcase drain plug is located on the bottom of the crankcase. Access the

drain plug through the access hole in the skid plate under the crankcase (see

next page).

CAUTION

Always remove all cargo from the cargo box before lifting the box to access

engine components.

Access the oil fill cap, dipstick and filter under the cargo box.

1. Remove all cargo from the cargo box. See page 69.

2. Position the vehicle on a level surface.

3. Place the transmission in PARK.

4. Stand clear and pull up on the cargo box release lever. Lift the front of the

cargo box.

5. For maximum clearance in the engine compartment, detach the cargo box

shock from the base of the box.

6. Carefully detach the fuel line and spark plug wires from their retaining clips

on the outlet hose, then loosen the outlet hose clamp and remove the hose

from the clutch cover.

CAUTION

Do not allow debris or other objects to enter the clutch cover.

7. Locate the crankcase drain plug access hole in the skid plate.

8. Clean the area around the crankcase drain plug.

CAUTION

Hot oil can cause burns to skin. Do not allow hot oil to contact skin.

9. Place a drain pan under the engine crankcase and remove the drain plug.

Allow the oil to drain completely.

10. Using an oil filter wrench, turn the filter counter-clockwise to remove it.

11. Using a clean dry cloth, clean the filter sealing surface on the crankcase.

MAINTENANCE

12. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to

make sure the o-ring is in good condition.

13. Install the new filter and turn by hand until the filter gasket contacts the

sealing surface, then turn an additional 3/4 turn.

14. Reinstall the drain plug. Torque the drain plug to 12 ft-lbs (16 Nm).

15. Remove the oil fill cap and add 2.5 quarts (2.4 l) of recommended oil.

Reinstall the fill cap.

16. Start the engine and check for leaks.

17. Stop the engine and wait 15 seconds before removing the dipstick.

18. Remove the dipstick. Wipe it dry with a clean cloth.

19. Reinstall the dipstick completely. Remove the dipstick and check the oil level.

20. Remove the oil fill cap and add oil as needed to bring the level to the upper

mark on the dipstick. Do not overfill.

21. Reinstall the fill cap. Reinstall the dipstick.

22. Reinstall the outlet hose to the clutch box, routing the hose under the fuel line

and spark plug wires. Make sure the clutch cover rib aligns in the notch at the

end of the outlet hose. Tighten the clamp.

23. Reinstall the fuel line and spark plug wires to the retaining clips on the outlet

hose.

24. Lower the cargo box and push down securely to latch.

25. Dispose of used filter and oil properly.

MAINTENANCE

GEARCASES

TRANSMISSION (MAIN GEARCASE)

Always check and change the transmission oil at the intervals outlined in the

Periodic Maintenance Chart section. Refer to the Gearcase Specifications Chart

for recommended lubricants, capacities and torque specifications. See page 129

for the part numbers of POLARIS products.

OIL CHECK

The fluid check/fill plug is located on the rear of the gearcase. Maintain the oil

level even with the bottom of the plug hole threads.

1. Position the vehicle on a level

surface.

2. Remove the fill plug q.

3. Check the fluid level.

4. Add the recommended fluid to the

bottom of the fill plug hole. Do not

overfill.

5. Reinstall the fill plug. Torque to

specification.

OIL CHANGE

The drain plug is located near the bottom of the gearcase.

1. Remove the fill plug q.

2. Place a drain pan under the drain

plug w.

3. Remove the drain plug. Allow the

fluid to drain completely.

4. Clean and reinstall the drain plug.

Torque to specification.

5. Add the recommended fluid to the

bottom of the fill plug hole. Do not

overfill.

6. Reinstall the fill plug. Torque to

specification.

7. Check for leaks. Discard used fluid

properly.

MAINTENANCE

FRONT GEARCASE

Always check and change the front gearcase oil at the intervals outlined in the

Periodic Maintenance Chart. Maintain the oil level even with the bottom thread

of the fill plug hole. Refer to the Gearcase Specifications Chart for

recommended lubricants, capacities and torque specifications. See page 129 for

the part numbers of POLARIS products.

OIL CHECK

The front gearcase fill plug is located on the right side of the front gearcase.

1. Position the vehicle on a level

surface.

2. Place the transmission in PARK.

3. Remove the fill plug q. Check the

oil level.

4. Add the recommended oil as

needed.

5. Reinstall the fill plug. Torque to

specification.

OIL CHANGE

1. Support the vehicle securely with a jackstand.

2. Remove the fill plug.

3. Place a drain pan under the drain plug.

4. Remove the drain plug. Allow the oil to drain completely.

5. Clean and reinstall the drain plug. Torque to specification.

6. Add the recommended oil.

7. Reinstall the fill plug. Torque to specification.

8. Check for leaks. Discard of used oil properly.

GEARCASE SPECIFICATION CHART

GEARCASE LUBRICANT CAPACITY FILL PLUG

TORQUE

DRAIN PLUG

TORQUE

Main

Gearcase

(Transmission)

AGL Gearcase

Lubricant &

Transmission

Fluid

44 oz.

(1300 ml)

10-14 ft. lbs.

(14-19 Nm)

10-14 ft. lbs.

(14-19 Nm)

Front

Gearcase

Demand Drive

Fluid

7.5 oz.

(222 ml)

8-10 ft. lbs.

(11-14 Nm)

8-10 ft. lbs.

(11-14 Nm)

100

MAINTENANCE

SPARK PLUGS

SPARK PLUG RECOMMENDATIONS

Refer to the Specifications section for the recommended spark plug type for your

vehicle. Always torque spark plugs to specification.

NOTICE

Using non-recommended spark plugs can result in serious engine damage.

Always use POLARIS-recommended spark plugs or their equivalent.

SPARK PLUG GAP / TORQUE

ELECTRODE GAP PLUG TORQUE

0.7-0.8 mm 8.8 ft. lbs. (12 Nm)

SPARK PLUG INSPECTION

Spark plug condition is indicative of engine operation. The spark plug firing end

condition should be read after the engine is warmed up and the vehicle is driven

at higher speeds. Immediately check the spark plug for correct color.

CAUTION

Always remove all cargo from the cargo box before lifting the box to access

engine components.

1. Lift the cargo box. Remove the spark plug cap.

CAUTION

A hot exhaust system and engine can cause burns. Wear protective gloves

when removing a spark plug for inspection.

2. Using the spark plug wrench provided in the tool kit, remove the plug by

rotating it counter-clockwise.

3. Reverse the procedure for spark plug installation. Apply anti-seize compound

to the spark plug threads.

4. Torque to specification.

NORMAL PLUG

The normal insulator tip is gray, tan or light brown. There will be few combustion

deposits. The electrodes are not burned or eroded. This indicates the proper

type and heat range for the engine and the service.

101

MAINTENANCE

The tip should not be white. A white insulator tip indicates overheating, caused

by use of an improper spark plug or incorrect throttle body adjustments.

WET FOULED PLUG

The wet fouled insulator tip is black. A damp oil film covers the firing end. There

may be a carbon layer over the entire nose. Generally, the electrodes are not

worn. General causes of fouling are: incorrect spark plug type or heat range,

excessive engine oil consumption or incorrect throttle body adjustments.

COOLING SYSTEM

The engine coolant level is controlled or maintained by the recovery system. The

recovery system components are the overflow bottle, radiator filler neck, radiator

pressure cap and connecting hose.

As coolant operating temperature increases, the expanding (heated) excess

coolant is forced out of the radiator, past the pressure cap, and into the overflow

bottle. As engine coolant temperature decreases, the contracting (cooled)

coolant is drawn back up from the tank, past the pressure cap, and into the

radiator.

Some coolant level drop on new vehicles is normal as the system is purging

itself of trapped air. Observe coolant levels and maintain as recommended by

adding coolant to the overflow bottle.

ADDING OR CHANGING COOLANT

POLARIS recommends the use of POLARIS Antifreeze 50/50 Premix. This

antifreeze is already premixed and ready to use. Do not dilute with water.

To ensure that the coolant maintains its ability to protect the engine, we

recommend that the system be completely drained every five (5) years and fresh

Antifreeze 50/50 Premix added.

Any time the cooling system has been drained for maintenance or repair,

replace the coolant with fresh Antifreeze 50/50 Premix. If the recovery bottle has

run dry, the level in the radiator should be inspected. Add coolant as needed.

RADIATOR AND COOLING FAN

Always check and clean the screen and radiator fins at the intervals outlined in

the Periodic Maintenance Chart. Do not obstruct or deflect air flow through the

radiator by installing unauthorized accessories in front of the radiator or behind

the cooling fan. Interference with the radiator air flow can lead to overheating

and consequent engine damage.

NOTICE

Washing the vehicle with a high-pressure hose could damage the radiator fins

and impair the radiator's effectiveness. Using a high-pressure system is not

recommended.

102

MAINTENANCE

OVERFLOW BOTTLE COOLANT LEVEL

Always check and change the coolant at the intervals outlined in the Periodic

Maintenance Chart. Maintain the coolant level between the minimum and

maximum marks on the bottle (when the fluid is cool).

1. Position the vehicle on a level surface.

2. Place the transmission in PARK.

3. Remove the hood. See page 46.

4. View the coolant level in the overflow bottle.

5. If the coolant level is below the safe operating range, make sure the pressure

cap is securely installed before adding coolant to the overflow bottle.

NOTE

Always add coolant through the bottle filler opening, not through the radiator

pressure cap opening.

6. Reinstall the coolant bottle cap.

TIP

If coolant must be added often, or if the overflow bottle runs completely dry,

there may be a leak in the system. Your POLARIS dealer, or other qualified

person, can inspect the cooling system.

RADIATOR COOLANT LEVEL

Check the radiator coolant level ONLY if the overflow bottle is dry. If the overflow

bottle contains fluid, the radiator level should NOT be inspected.

TIP

If the overflow bottle runs completely dry, there may be a leak in the system.

Your POLARIS dealer, or other authorized, can inspect the cooling system.

1. Remove the hood. See page 46.

CAUTION

Escaping steam can cause burns. Never remove the pressure cap while the

engine is warm or hot. Always allow the engine to cool before removing the

pressure cap.

2. If the overflow bottle is dry, slowly remove the radiator pressure cap.

103

MAINTENANCE

3. View the coolant level through the opening.

4. Use a funnel and slowly add coolant as needed.

5. Reinstall the pressure cap securely. Use of a non-standard pressure cap will

not allow the recovery system to function properly. Your POLARIS dealer, or

other qualified person, can provide the correct replacement part.

6. With the pressure cap securely installed, add coolant to the overflow bottle to

the recommended level. Reinstall the coolant bottle cap.

POLARIS VARIABLE TRANSMISSION (PVT)

SYSTEM

WARNING

Failure to comply with the instructions in this warning can result in severe injury

or death. Do not modify any component of the PVT system. Doing so may

reduce its strength so that a failure may occur at a high speed. The PVT

system has been precision balanced. Any modification will cause the system to

be out of balance, creating vibration and additional loads on components.

The PVT system rotates at high speeds, creating large amounts of force on

clutch components. As the owner, you have the following responsibilities for

your own safety and the safety of others:

• Always follow all recommended maintenance procedures. Always look for

and remove debris inside and around the clutch and vent system when

replacing the belt.

• See your dealer or other qualified service person as outlined in the owner's

manual.

• This PVT system is intended for use on POLARIS products only. Do not

install it in any other product.

• Always make sure the PVT housing is securely in place during operation.

BELT REPLACEMENT / DEBRIS REMOVAL

If a belt fails, always clean any debris from the duct and from the clutch and

engine compartments when replacing the belt.

WARNING

Failure to remove ALL debris when replacing the belt could result in vehicle

damage, loss of control and severe injury or death.

104

MAINTENANCE

1. Allow hot components to cool before performing this procedure.

2. Remove the engine access cover and thoroughly clean all debris from the

aluminum debris bracket and from the engine compartment.

3. Remove the clutch cover screws and open the clutch cover. (It does not have

to be removed from the vehicle.) Remove all debris wrapped in and around

the PVT system.

TIP

Use the shock/clutch tool from the tool kit to slightly open the sheaves to aid in

debris removal and belt installation.

4. Remove all debris from the entire clutch air duct passage.

5. Check for signs of damage to seals on the transmission and engine. If any

seals appear to be damaged, your vehicle requires prompt service. Your

POLARIS dealer can assist.

TIP

Belt slip is responsible for creating excessive heat that destroys belts, wears

clutch components and causes outer clutch covers to fail. Switch to low range

while operating at slower speeds to extend the life of the PVT components

(belt, cover, etc.).

PVT DRYING

There may be some instances when water is accidentally ingested into the PVT

system. Use the following instructions to dry it out before operating.

1. Remove the clutch cover drain plug.

2. Allow the water to drain. Reinstall the drain plug.

3. Place the transmission in PARK. Apply the brakes.

4. Start the engine.

5. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the

belt and clutches. Do not hold the throttle wide open for more than 10

seconds.

6. Allow the engine RPM to settle to idle speed. Apply the brakes. Shift the

transmission to the lowest available range.

7. Test for belt slippage. If the belt slips, repeat the process.

8. Your vehicle requires service as soon as possible. Your POLARIS dealer, or

other qualified person, can assist.

105

MAINTENANCE

VEHICLE IMMERSION

WARNING

If your vehicle becomes immersed, major engine damage can result if the

machine is not thoroughly inspected. Take the vehicle in for service before

starting the engine. Your POLARIS dealer, or other qualified person, can

provide this service.

If it's impossible to take your POLARIS vehicle to a dealer before starting it,

follow the steps outlined below:

1. Move the vehicle to dry land, or at the very least, to water below the

floorboard.

2. Dry any water present in the air box. Filter replacement is required if water is

present.

3. Dry any water present in the intake manifold.

4. Remove the spark plugs. Turn the engine over several times using the

electric start.

5. Dry the spark plugs and reinstall, or replace with new plugs.

6. Attempt to start the engine. If necessary, repeat the drying procedure.

7. Take the vehicle in for service as soon as possible, whether you succeed in

starting it or not. Your POLARIS dealer, or other qualified person, can provide

the required service.

8. If water has been ingested into the PVT follow the PVT Drying procedure.

STEERING WHEEL INSPECTION

Check the steering wheel for specified freeplay and smooth operation at the

intervals outlined in the Periodic Maintenance Chart section.

1. Position the vehicle on level ground.

2. Lightly turn the steering wheel left and right.

3. There should be 0.8-1.0 in (20-25 mm) of freeplay.

4. If there is excessive freeplay or strange noises, or the steering feels rough or

“catchy,” have the steering system inspected by an authorized dealer.

106

MAINTENANCE

POWER STEERING UNIT

Frequently clean the areas around

and on the power steering unit to

allow proper cooling. Clean these

areas ethoroughly.

FILTER SYSTEMS

AIR FILTER

Always change the air filter at the

intervals outlined in the Periodic

Maintenance Chart. Service the air filter

more frequently if the vehicle is

operated in wet conditions or at high

throttle for extended periods.

1. Lift the cargo box to access the air box.

2. Release the air box cover latches and remove the cover.

3. Remove the air filter.

4. Inspect the air box for oil or water deposits. Wipe away any deposits with a

clean cloth.

5. Install a new filter if needed. Do not attempt to clean the air filter.

PVT INTAKE SCREEN

The PVT intake screen is located on the driver’s side of the vehicle.

Inspect the screen before each use of the vehicle. Remove all dirt and debris

from the screen and clean it frequently with warm soapy water.

107

MAINTENANCE

SPARK ARRESTER

WARNING

• Never operate the vehicle without the spark arrester.

• Remove any combustible materials from the area.

Failure to heed the following warnings while servicing the spark arrester

could result in serious injury or death.

• Never run the engine in an enclosed area. Exhaust contains poisonous

carbon monoxide gas that can cause loss of consciousness or death in a

very short time.

• Do NOT perform service on the spark arrester while the system is HOT.

Exhaust system temperatures can reach extreme temperatures. Allow

components to cool sufficiently before proceeding.

• Do not stand behind or in front of the vehicle while purging the exhaust

system.

• Never go under the vehicle while it is inclined.

• Wear eye protection and gloves while servicing.

Periodically clean the spark arrester to remove accumulated carbon.

1. Place the transmission in PARK.

2. Remove the arrester retaining bolt and nut.

3. Remove the arrester from the end of the muffler.

4. Use a non-synthetic brush to clean the arrester screen. A synthetic brush

may melt if components are warm. If necessary, blow debris from the screen

with compressed air.

5. Inspect the screen for wear and damage. Replace a worn or damaged

screen.

6. Reinstall the arrester.

7. Torque the bolt to 9-11 ft. lbs. (12-15 Nm).

108

MAINTENANCE

BRAKES

The front and rear brakes are hydraulic disc type brakes activated by the brake

pedal.

WARNING

Do not perform maintenance immediately after the vehicle has been operated,

as the brake system may become very hot. Serious burns could result from

contact with hot brake components. Allow components to cool before

proceeding. Always wear eye protection and gloves.

BRAKE FLUID

Inspect the brake system routinely. Inspect the level of the brake fluid before

each operation.

WARNING

After opening a bottle of brake fluid, always discard any unused portion. Never

store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly

absorbs moisture from the air. The moisture causes the boiling temperature of

the brake fluid to drop, which can lead to early brake fade and the possibility of

accident or severe injury.

Change the brake fluid every two years and any time the fluid becomes

contaminated, the fluid level is below the minimum, or if the type and brand of

the fluid in the reservoir are unknown.

1. Position the vehicle on a level surface.

2. Place the transmission in PARK.

3. View the brake fluid level at the reservoir in the driver’s side wheel well.

4. The level should be between the upper (MAX) and lower (MIN) level lines.

5. If the fluid level is lower than the upper level line, add brake fluid to the upper

(MAX) line.

6. Apply the brake forcefully for a few seconds and check for fluid leakage

around the fittings.

109

MAINTENANCE

BRAKE INSPECTION

WARNING

Do not apply WD-40® or any petroleum product to brake discs. These types of

products are flammable and may also reduce the friction between the brake

pad and caliper.

1. Check the brake system for fluid leaks.

2. Check the brake pedal for excessive

travel or a spongy feel.

3. Check the friction pads for wear, damage

and looseness.

4. Check brake discs for signs of cracks,

excessive corrosion, warping or other

damage. Clean any grease using an

approved brake cleaner or alcohol.

5. Inspect the brake disc spline and pad

wear surface for excessive wear. Change

pads when worn to 0.030" (0.762 mm).

ABS INSPECTION

1. If the ABS system fails or becomes

defective, the ABS symbol will

illuminate on the Instrument Cluster.

2. If this occurs, decrease vehicle

speed to maximum of 60 km/h.

3. The speed sensors qare located in

the front and rear of the vehicle as

shown. To inspect the ABS system,

check that the air gap of all 4 speed

sensors is 0.8 mm (± 0.1) w.

CAUTION

Ensure that the ABS sensors are not adjusted outside the appropriate air gap

threshold. The ABS system may function improperly if this occurs.

If more assistance is needed, please contact your Polaris dealer or other

qualified person.

110

MAINTENANCE

Front Left Front Right

Rear Right Rear Left

111

MAINTENANCE

SUSPENSION SETTINGS (EPS)

FRONT/REAR SPRING PRELOAD (EPS)

The front and rear suspensions are preload adjustable, with five possible

settings. The suspensions are set on the lowest setting at the factory. The

factory setting is appropriate for nearly all riding conditions.

If desired, the suspension may be adjusted to maintain vehicle clearance height

when carrying loads. Always heed the following rules if you make adjustments to

this suspension.

• Always return the suspension to the lowest setting after the load is removed

from the vehicle. The increased suspension height will negatively impact

vehicle stability when operating without a load.

• Always apply the same adjustment setting to .all four wheels

Adjust the front and rear shock springs by rotating the adjustment cam either

clockwise or counter-clockwise to increase or decrease spring tension.

SUSPENSION SETTINGS (EPS DELUXE)

FRONT/REAR SPRING PRELOAD (EPS DELUXE)

The front and rear suspensions are preload adjustable. The suspensions are set

on the lowest setting at the factory. The factory setting is appropriate for nearly

all riding conditions.

If desired, the suspension may be adjusted to maintain vehicle clearance height

when carrying loads. Always heed the following rules if you make adjustments to

this suspension.

• Always return the suspension to the lowest setting after the load is removed

from the vehicle. The increased suspension height will negatively impact

vehicle stability when operating without a load.

• Always apply the same adjustment setting to .all four wheels

• Do not increase the spring preload by more than one inch (25.4 mm) over the

factory setting.

FACTORY PRELOAD SETTINGS

Front 6 5/8'' (168.3 mm)

Rear 1 5/8'' (41.3 mm)

Your POLARIS dealer, or other qualified person, can provide the tool required to

make suspension adjustments.

1. Elevate the vehicle to allow the suspension to fully extend.

2. Loosen the jam nut and back it away from the adjusting ring.

112

MAINTENANCE

3. Turn the adjusting ring to the left (1) to increase preload for a stiffer ride. Turn

the adjusting ring to the right (2) to decrease preload for a softer ride.

WARNING

Uneven adjustment may cause poor handling of the vehicle, which could result

in an accident. Always adjust both the left and right spring preloads equally.

Your POLARIS dealer, or other qualified person, can assist.

4. Tighten the jam nut firmly against the adjuster ring.

FRONT/REAR SHOCK COMPRESSION

The compression damping adjustment is located on the shock ‘Piggyback’

reservoir of each shock. Damping adjustments can be made without using any

tools.

Turn the adjuster knob clockwise to increase compression damping. Turn the

adjuster knob counter-clockwise to decrease compression damping.

FACTORY COMPRESSION SETTINGS

Front Shock 8 clicks from full hard

Rear Shock 8 clicks from full hard

113

MAINTENANCE

TIRES

WARNING

Operating your vehicle with worn tires will increase the possibility of skidding,

loss of control and an accident, which could result in serious injury or death.

Always replace tires when the tread depth measures 1/8 in (3 mm) or less.

Improper tire inflation or the use of non-standard size or type of tires may

adversely affect vehicle handling, which could result in vehicle damage or

personal injury. Always maintain proper tire pressure. Always use POLARIS

approved size and type of tires for this vehicle when replacing tires.

TIRE TREAD DEPTH

Always replace tires when tread depth

is worn to 3 mm (1/8”) or less.

AXLE AND WHEEL NUT TORQUE SPECIFICATIONS

Inspect the following items occasionally for tightness, and if they've been

loosened for maintenance service. Do not lubricate the stud or the lug nut.

NUT TYPE LOCATION NUT TORQUE

Lug Nut

(Aluminum

Wheels)

Front and Rear 120 ft-lbs (163 Nm)

Lug Nut (Tapered) Front and Rear 60 ft-lbs (81 Nm)

WHEEL REMOVAL

1. Position the vehicle on a level surface.

2. Place the transmission in PARK. Stop the engine.

3. Loosen the wheel nuts slightly.

114

MAINTENANCE

4. Elevate the side of the vehicle by placing a suitable stand under the frame.

5. Remove the wheel nuts and washers. Remove the wheel.

WHEEL INSTALLATION

WARNING

Improperly installed wheels can adversely affect tire wear and vehicle

handling, which can result in serious injury or death. Always ensure that all

nuts are torqued to specification. Do not service axle nuts that have a cotter pin

installed. Your dealer can assist.

1. Place the transmission in PARK.

2. Place the wheel on the hub with the valve stem toward the outside and

rotation arrows on the tire pointing toward forward rotation.

3. Attach the wheel nuts and washers and finger-tighten.

4. Carefully lower the vehicle to the ground.

5. Torque the wheel nuts to specification.

FUSES

If the engine stops or will not start, or if you experience other electrical failures, a

fuse may need replacement. Locate and correct any short circuits that may have

caused the blown fuse, then replace the fuse. Raise the driver’s seat to access

the fuses. Spare fuses are provided in the fuse box. The power steering fuse (if

equipped) is located on the power steering wiring harness near the fuse box.

If your vehicle comes equipped with a RideCommand display, spare fuses can

be found in the tool kit.

If you suspect that a fuse or relay may not be working properly, please see your

POLARIS dealer, or other qualified person.

LIGHTS

Poor lighting can result in reduced visibility when driving. Headlight and taillight

lenses become dirty during normal operation. Clean lights frequently and

replace burned out lamps promptly. Do not operate this vehicle at night or in low

light conditions until the headlight is replaced. Always make sure lights are

adjusted properly for best visibility.

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from

your skin leaves a residue, causing a hot spot that will shorten the life of the

lamp.

115

MAINTENANCE

HEADLIGHT REPLACEMENT

If a headlight becomes damaged or inoperable, the entire headlight assembly

must be replaced. Do not operate this vehicle at night or in low light conditions

until the headlight is replaced. Always make sure lights are adjusted properly for

best visibility.

HEADLIGHT BEAM ADJUSTMENT

1. Place the vehicle on a level surface with the headlight approximately 25 ft.

(7.6 m) from a wall.

2. Place the transmission in PARK and engage the parking brake.

3. Measure the distance from the floor to the center of the headlight and make a

mark on the wall at the same height.

4. Apply the brakes. Start the engine. Turn on the headlights.

5. Observe the headlight aim. The most intense part of the headlight beam

should be aimed 8" (20 cm) below the mark placed on the wall. Include the

weight of a rider on the seat while performing this step.

6. If a headlight needs adjustment, locate the adjustment screw at the back of

the headlight.

7. Loosen the screw. Adjust the headlight, then tighten the screw.

8. Repeat steps 5-7 until the lamp is properly adjusted.

116

MAINTENANCE

BATTERY

Your vehicle has a sealed battery, which requires little maintenance. Always

keep battery terminals and connections free of corrosion. If cleaning is

necessary, remove the corrosion with a stiff wire brush. Wash with a solution of

one tablespoon baking soda and one cup water. Rinse well with tap water and

dry off with clean shop towels. Coat the terminals with dielectric grease or

petroleum jelly.

BATTERY REMOVAL

WARNING

Improperly connecting or disconnecting battery cables can result in an

explosion and cause serious injury or death. When removing the battery,

always disconnect the negative (black) cable first. When reinstalling the

battery, always connect the negative (black) cable last.

1. Remove the driver’s seat to access the battery.

2. Disconnect the black (-) battery cable first. Disconnect the red (+) battery

cable last.

3. Remove the battery hold-down strap.

4. Lift the battery out of the vehicle.

BATTERY INSTALLATION

Using a new battery that has not been fully charged can damage the battery and

result in a shorter life. It can also hinder vehicle performance. Follow the battery

charging instructions on page 118 before installing the battery.

1. Ensure that the battery is fully charged.

2. Place the fully charged battery in the battery holder. Make sure the positive

terminal is toward the driver’s side of the vehicle.

3. Coat the terminals with dielectric grease or petroleum jelly.

4. Connect and tighten the red (+) cable first. Connect and tighten the black (-)

cable last.

5. Install the hold-down strap.

6. Reinstall the seat.

BATTERY STORAGE

Whenever the vehicle is not used for a period of three months or more, remove

the battery from the vehicle, ensure that it's fully charged, and store it out of the

sun in a cool, dry place. Check battery voltage each month during storage and

recharge as needed to maintain a full charge.

117

MAINTENANCE

TIP

Battery charge can be maintained by using a POLARIS Battery Tender charger

or by charging about once a month to make up for normal self discharge.

Battery Tender can be left connected during the storage period, and will

automatically charge the battery if the voltage drops below a predetermined

point.

BATTERY CHARGING (SEALED BATTERY)

The following battery charging instructions apply only to the installation of a

sealed battery. Read all instructions before proceeding with the installation of

this battery.

The sealed battery is already filled with electrolyte and has been sealed and fully

charged at the factory. Never pry the sealing strip off or add any other fluid to this

battery.

The single most important thing about maintaining a sealed battery is to keep it

fully charged. Since the battery is sealed and the sealing strip cannot be

removed, you must use a voltmeter or multimeter to measure DC voltage.

WARNING

An overheated battery may explode, causing severe injury or death. Always

watch charging times carefully. Stop charging if the battery becomes very

warm to the touch. Allow it to cool before resuming charging.

For a refresh charge, follow all instructions carefully.

1. Check the battery voltage with a voltmeter or multimeter. A fully charged

battery will register 12.8 V or higher.

2. If the voltage is less than 12.8 volts, recharge the battery at 1.2 amps or less

until battery voltage is 12.8 or greater.

TIP

When using an automatic charger, refer to the charger manufacturer's

instructions for recharging. When using a constant current charger, use the

guidelines below for recharging.

Always verify battery condition before and 1-2 hours after the end of charging.

118

MAINTENANCE

STATE OF

CHARGE

VOLTAGE ACTION CHARGE TIME*

100% 12.8-13.0 volts None, check at 3

mos. from date of

manufacture

None required

75%-100% 12.5-12.8 volts May need slight

charge, if no

charge given,

check in 3 months

3-6 hours

50%-75% 12.0-12.5 volts Needs charge 5-11 hours

25%-50% 11.5-12.0 volts Needs charge At least 13 hours,

verify state of

charge

0%-25% 11.5 volts or less Needs charge with

desulfating charger

At least 20 hours

*(Using constant current charger @ standard amps specified on top of battery)

CLEANING AND STORAGE

WASHING THE VEHICLE

Keeping your POLARIS vehicle clean will not only improve its appearance but it

can also extend the life of various components.

NOTICE

Water in the PVT system could cause the drive belt to become wet and slip in

the clutches. When washing the vehicle, always avoid spraying water directly

toward the PVT intake screen.

High water pressure may damage components. POLARIS recommends

washing the vehicle by hand or with a garden hose, using mild soap.

Certain products, including insect repellents and chemicals, will damage

plastic surfaces. Do not allow these types of products to contact the vehicle.

The best and safest way to clean your POLARIS vehicle is with a garden hose

and a pail of mild soap and water.

1. Use a professional-type washing cloth, cleaning the upper body first and the

lower parts last.

2. Rinse with clean water frequently.

3. Dry surfaces with a chamois to prevent water spots.

119

MAINTENANCE

WASHING TIPS

• Avoid the use of harsh cleaners, which can scratch the finish.

• Do not use a power washer to clean the vehicle.

• Do not use medium to heavy duty compounds on the finish.

• Always use clean cloths and pads for cleaning and polishing. Old or reused

cloths and pads may contain dirt particles that will scratch the finish.

• Grease all zerk fittings immediately after washing. Allow the engine to run for

a while to evaporate any water that may have entered the engine or exhaust

system.

• Be sure to clean the vehicle’s spray suppression valancesq.

If a high pressure water system is used for cleaning (not recommended),

exercise extreme caution. The water may damage components and could

remove paint and labels. Avoid directing the water stream at the following items:

• Wheel bearings

• Radiator

• Transmission seals

• Brakes

• Cab and body panels

120

MAINTENANCE

• Labels and decals

• Electrical components and wiring

• Air intake components

If an informational or graphic label becomes illegible or comes off, contact your

POLARIS dealer to purchase a replacement. Replacement safety labels are

provided by POLARIS at no charge.

POLISHING THE VEHICLE

POLARIS recommends the use of common household aerosol furniture polish

for polishing the finish on your POLARIS vehicle. Follow the instructions on the

container.

POLISHING TIPS

• Avoid the use of automotive products, some of which can scratch the finish of

your vehicle.

• Always use clean cloths and pads for cleaning and polishing. Old or reused

cloths and pads may contain dirt particles that will scratch the finish.

STORAGE TIPS

NOTICE

Starting the engine during the storage period will disturb the protective film

created by fogging and damage could occur. Never start the engine during the

storage period.

CLEAN THE EXTERIOR

Make any necessary repairs and clean the vehicle as recommended.

STABILIZE THE FUEL

1. Fill the fuel tank.

2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer or

equivalent fuel treatments or stabilizers. Follow the instructions on the

container for the recommended amount. Carbon Clean removes water from

fuel systems, stabilizes fuel and removes carbon deposits from pistons,

rings, valves and exhaust systems.

3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse

through the entire fuel delivery system.

OIL AND FILTER

Change the oil and filter. See the Engine Oil section.

121

MAINTENANCE

AIR FILTER / AIR BOX

Replace the air filter. See Maintenance Chapter. Clean the air box.

INSPECT AND LUBRICATE

Inspect all cables and lubricate all areas of the vehicle as recommended in the

Periodic Maintenance Chart.

BATTERY MAINTENANCE

See the Battery Storage section and Battery Charging section for storage and

charging procedures.

FLUID LEVELS

Inspect the fluid levels. Add or change fluids as recommended in the Periodic

Maintenance Chart.

• Demand drive fluid (front gearcase)

• Rear gearcase fluid (if equipped)

• Transmission fluid

• Brake fluid (change every two years and any time the fluid looks dark or

contaminated)

• Coolant (test strength/fill)

FOG THE ENGINE

1. Treat the fuel system with POLARIS Carbon Clean or other equivalent fuel

treatment. Follow the instructions on the container. Start the engine. Allow it

to idle for several minutes so the Carbon Clean reaches the injectors. Stop

the engine.

2. Remove the spark plugs and add 1–1.5 oz. (29.5–44 cc.) of engine oil. To

access the plug holes, use a section of clear 6 mm (1/4”) hose and a small

plastic squeeze bottle filled with the pre-measured amount of oil. Do this

carefully! If you miss the plug holes, oil will drain from the spark plug cavities

into the hole at the front of the cylinder head, and appear to be an oil leak.

3. Reinstall the spark plugs. Torque to specification.

4. Apply dielectric grease to the inside of each spark plug cap. Do not reinstall

the cap onto the plug at this step.

5. Turn the engine over several times. Oil will be forced in and around the

piston rings and ring lands, coating the cylinder with a protective film of fresh

oil.

6. Reinstall the spark plug caps.

7. If POLARIS fuel system additive is not used, fuel tank, fuel lines, and

injectors should be completely drained of gasoline.

122

MAINTENANCE

STORAGE AREA / COVERS

Be sure the storage area is well ventilated. Cover the vehicle with a genuine

POLARIS cover. Do not use plastic or coated materials. They do not allow

enough ventilation to prevent condensation, and may promote corrosion and

oxidation.

REMOVAL FROM STORAGE

WARNING

Engine exhaust contains poisonous carbon monoxide and can cause loss of

consciousness or death. Never run an engine in an enclosed area.

1. Check the battery electrolyte level and charge the battery if necessary. Install

it in the vehicle. Make sure the battery vent hose is routed properly and that

it's not pinched or restricted in any way.

2. Make sure spark plugs are tight.

3. Fill the fuel tank with fuel.

4. Check all the points listed in the Daily Pre-Ride Inspection. Tightness of the

bolts, nuts and other fasteners should be checked by an authorized dealer or

other qualified service facility.

5. Lubricate at the intervals outlined in the Periodic Maintenance Chart.

TRANSPORTING THE GENERAL

Follow these procedures when transporting the vehicle.

1. Place the transmission in PARK. Stop the engine.

2. Slowly release the brake pedal and make sure the transmission is in PARK

before exiting the vehicle.

3. Remove the key to prevent loss during transporting.

123

MAINTENANCE

4. Secure the fuel cap, hood, doors (if equipped) and cargo box. Ensure that

the seats are attached correctly and are not loose.

WARNING

Cargo and other loose vehicle parts may fly off while transporting this vehicle.

Secure or remove all cargo, and inspect the unit for loose parts prior to

transport.

If transporting the vehicle in a non-enclosed trailer, then the vehicle must FACE

FORWARD, or roof must be removed.

Failure to comply may allow airflow, vibration, or other factors to separate the

roof from the vehicle and cause an accident, resulting in serious personal

injury or death.

5. Always tie the frame of the POLARIS vehicle to the transporting unit securely

with suitable straps or rope. Do not attach tie straps to the front A-arm bolt

pockets.

ELEVATING THE VEHICLE FOR SERVICE

Some service procedures require that the vehicle be elevated. Before

proceeding, remember to:

• Always position the vehicle on a firm, level surface before elevating.

• Only use an appropriate sized lift or jack.

• Refrain from positioning a jack or jack stand under any components other

than the vehicle frame.

• Refrain from allowing the vehicle to remain elevated on a floor jack for an

extended period of time.

PLACING ONTO JACK STANDS

1. Place the floor jack directly beneath the center of the vehicle (either front or

rear).

2. This vehicle is not equipped with dedicated jacking points. Make sure that

the floor jack only makes contact with the vehicle only while lifting.frame

3. After vehicle is elevated to desired height, place jack stands under the

vehicle on both sides of the floor jack, then lower the vehicle until theframe

jack stands come into contact with the vehicle .frame

124

MAINTENANCE

SPECIFICATIONS

GENERAL 1000 TRACTOR

POLARIS GENERAL 1000 TRACTOR AND ABS TRACTOR

Gross Vehicle Weight (includes weight of

operator, passenger, cargo, accessories)

1268 kg

Dry Weight 733 kg (ABS)

732 kg (EPS Deluxe)

717 kg (EPS)

Test GVW - Rollover Protection System (ROPS) 1268 kg per OECD Code 4 procedure

Fuel Capacity 36 L

Engine Oil Capacity 2.4 L

Coolant Capacity 5.1 L

Maximum Braked Trailer Mass 680 kg

Maximum Unbraked Trailer Mass 680 kg

Max. Cargo Box Load 272 kg

Overall Length 294.6 cm (EPS)

299.7 cm (EPS w/Winch and Aluminum Wheels)

299.7 cm (EPS Deluxe)

Overall Width 156.2 cm

Overall Height 193 cm

Wheelbase 205.7 cm

Cargo Box Dimensions (Inside) 66 x 109 x 28 cm

Ground Clearance 30.5 cm

Min. Turning Radius 483 cm

Engine 4-Stroke DOHC Twin Cylinder

Displacement 999 cc

Bore x Stroke 93 mm x 73.5 mm

Alternator Output 560 W @ 3000 RPM

Compression Ratio 10.5:1

Starting System Electric

Fuel System Electronic fuel injection

125

SPECIFICATIONS

POLARIS GENERAL 1000 TRACTOR AND ABS TRACTOR

Ignition System Electronic

Spark Plug / Gap MR7F / 0.7-0.8 mm

Front Suspension Independent Double A-arm w/31 cm of travel

Rear Suspension Independent Double A-arm w/33.7 cm of travel

Lubrication System Wet Sump

Driving System Type Automatic POLARIS Variable Transmission

Shift Type Single Lever Dual Range (H/L/N/R/P)

Transmission Gear Ratio - High 10.73:1

Transmission Gear Ratio - Low 22.79:1

Transmission Gear Ratio - Reverse 20.41:1

Front Drive Ratio 3.182:1

Tire Size - Front 27 x 9 in - R14 (235/70 - R14)

Tire Size - Rear 27 x 11 in - R14 (275/60 R14)

Tire Pressure - Front 83 kPa (12 PSI)

Tire Pressure - Rear 110 kPa (16 PSI)

Brakes, Front/Rear Foot Activated, 4-wheel hydraulic disc

Hood Headlight 2 dual beam LED clusters

Taillights 10 L.E.D. (.28W)

Brake Light 10 L.E.D. (3.1W)

Instrument Cluster Analog and LCD

Auxiliary DC Outlet 12V

Noise at Operator’s Ear 79.8 dB(A)

CO2 Emissions 949 g/kwh

This CO2 measurement results from testing

over a fixed test cycle under laboratory

conditions a(n) (parent) engine representative to

the engine type (engine family) and shall not

imply or express any guarantee of the

performance of a particular engine.

126

SPECIFICATIONS

CLUTCHING (GENERAL)

See your POLARIS dealer or qualified person for clutching specifications.

SEAT VIBRATION

DRIVER AWF AWS RATIO

98 kg 2.8 1.0 0.4

59 kg 2.6 1.1 0.4

127

SPECIFICATIONS

128

POLARIS PRODUCTS

LUBRICANTS / SERVICE PRODUCTS

PRODUCT SIZE (QUANTITY) QUANTITY PART NUMBER

Fogging Oil

12 fl oz (355 mL)

aerosol 12 2870791

1 qt (0.95 L) 12 2871517

PS-4

1 qt (0.95 L) 12 2876244

2 qt (1.90 L) 8 2877490

1 gal (3.8 L) 4 2876245

PS-4 Extreme Duty

1 qt (0.95 L) 12 2878920

2 qt (1.90 L) 8 2878922

1 gal (3.8 L) 4 2878919

AGL

1 qt (0.95 L) 12 2878068

1 gal (3.8 L) 4 2878069

Pump for Gallon Jug — 1 2870465

Demand Drive

1 qt (0.95 L) 12 2877922

2.5 gal (9.5 L) 2 2877923

Antifreeze / Coolant

1 qt (0.95 L) 12 2880514

1 gal (3.8 L) 6 2880513

Grease Gun Kit,

Premium All Season — 1 2871312

All Season Grease

Four 3 fl oz (89 mL)

packs 6 2871322

14 fl oz (414 mL)

cartridge 1 2871423

Premium Starter

Grease — 1 2871460

U-Joint Grease

3 fl oz (89 mL) tube 24 2871515

14 fl oz (414 mL)

cartridge 1 2871551

Dielectric Grease

(Nyogel®) — 1 2871329

Carbon Clean 12 fl oz (355 mL) bottle 12 2871326

Fuel Stabilizer 16 fl oz (473 mL) 12 2870652

129

POLARIS PRODUCTS

PRODUCT SIZE (QUANTITY) QUANTITY PART NUMBER

2.5 gal (9.5 L) 2 2872280

DOT 4 Brake Fluid — 1 2872189

Loctite® 565 Thread

Sealant — 1 2871956

POLARIS Battery

Tender Charger — 1 2859044

130

POLARIS PRODUCTS

TROUBLESHOOTING

DRIVE BELT WEAR/BURN

POSSIBLE CAUSE SOLUTION

Driving onto a pickup or tall

trailer in high range Use low range during loading.

Starting out going up a steep

incline Use low range. See warnings on page 73.

Driving at low RPM or ground

speed (3-7 MPH) Drive at a higher speed or use low range more frequently.

Insufficient warm-up at low

ambient temperatures

Warm the engine at least 5 minutes. With the transmission in

neutral, advance the throttle to about 1/8 throttle in short bursts, 5

to 7 times. The belt will become more flexible and prevent belt

burning.

Slow/easy clutch engagement Use the throttle quickly and effectively.

Towing/pushing at low RPM/

low ground speed Use low range only.

Utility use/plowing Use low range only.

Stuck in mud or snow

Shift the transmission to low range and carefully use fast,

aggressive throttle application to engage clutch.

WARNING: Excessive throttle may cause loss of control and

vehicle rollover.

Climbing over large objects

from a stopped position

Shift the transmission to low range and carefully use fast, brief,

aggressive throttle application to engage clutch.

WARNING: Excessive throttle may cause loss of control and

vehicle rollover.

Belt slippage from water or

snow ingestion into the PVT

system

Dry out the PVT (see page 105). Inspect clutch seals for damage

if repeated leaking occurs.

Clutch malfunction Your POLARIS dealer, or other qualified person, can assist.

Poor engine performance Check for fouled plug or foreign material in gas tank or fuel lines.

Your POLARIS dealer, or other qualified person, can assist.

Slippage from failure to warm

up belt

Always warm up the belt by operating below 30 mph for one mile

(5 miles or more when temperature is below freezing).

Wrong or missing belt Install the recommended belt.

Improper break-in Always break in a new belt and/or clutch. See page 60 and page

104.

131

TROUBLESHOOTING

ENGINE DOESN'T TURN OVER

POSSIBLE CAUSE SOLUTION

Low battery voltage Recharge the battery

Loose battery connections Check all connections and tighten

Loose solenoid connections Check all connections and tighten

Loose electronic control box

connections

Inspect, clean, reinstall connectors

ENGINE TURNS OVER, FAILS TO START

POSSIBLE CAUSE SOLUTION

Out of fuel Refuel

Water is present in fuel Drain the fuel system and refuel

Old or non-recommended fuel Replace with fresh recommended fuel

Fouled or defective spark plug Inspect plug and replace if necessary

No spark to spark plug Inspect plug and replace if necessary

Water or fuel in crankcase Your authorized dealer can assist

Low battery voltage Recharge the battery to 12.8 VDC

Mechanical failure Your authorized dealer can assist

ENGINE BACKFIRES

POSSIBLE CAUSE SOLUTION

Weak spark from spark plug Inspect, clean and/or replace spark plug

Incorrect spark plug gap or

heat range

Set gap to specs or replace plug

Old or non-recommended fuel Replace with fresh recommended fuel

Incorrectly installed spark plug

wires

Your authorized dealer can assist

Mechanical failure Your authorized dealer can assist

Loose ignition connections Check all connections and tighten

Water present in fuel Replace with fresh recommended fuel

132

TROUBLESHOOTING

ENGINE PINGS OR KNOCKS

POSSIBLE CAUSE SOLUTION

Poor quality or low octane fuel Replace with recommended fuel

Incorrect spark plug gap or

heat range

Set gap to specs or replace plug

ENGINE RUNS IRREGULARLY, STALLS OR

MISFIRES

POSSIBLE CAUSE SOLUTION

Fouled or defective spark plug Inspect, clean and/or replace spark plug

Worn or defective spark plug

wires

Your POLARIS dealer, or other qualified person, can assist

Incorrect spark plug gap or

heat range

Set gap to specs or replace plug

Loose ignition connections Check all connections and tighten

Water present in fuel Replace with new fuel

Low battery voltage Recharge battery to 12.8 VDC

Incorrect fuel Replace with recommended fuel

Clogged air filter Inspect and clean or replace

Throttle release switch

malfunction

Your POLARIS dealer, or other qualified person, can assist

Other mechanical failure Your POLARIS dealer, or other qualified person, can assist

133

TROUBLESHOOTING

ENGINE STOPS OR LOSES POWER

POSSIBLE CAUSE SOLUTION

Out of fuel Refuel

Water is present in fuel Replace with new fuel

Fouled or defective spark plug Inspect, clean and/or replace spark plug

Worn or defective spark plug

wires

Your POLARIS dealer, or other qualified person, can assist

Incorrect spark plug gap or

heat range

Set gap to specs or replace plug

Loose ignition connections Check all connections and tighten

Low battery voltage Recharge the battery to 12.8 VDC

Incorrect fuel Replace with fresh recommended fuel

Clogged air filter Inspect and clean or replace

Throttle release switch

malfunction

Your POLARIS dealer, or other qualified person, can assist

Other mechanical failure Your POLARIS dealer, or other qualified person, can assist

Overheated engine Clean radiator screen and core, clean engine exterior. Your

POLARIS dealer, or other qualified person, can assist

134

TROUBLESHOOTING

WARRANTY

LIMITED WARRANTY

POLARIS Industries Inc., 2100 Highway 55, Medina, MN 55340 (POLARIS)

gives a TWO YEAR LIMITED WARRANTY on all components of your POLARIS

vehicle against defects in material or workmanship. POLARIS further warrants

that the spark arrester in this product will meet the efficiency requirements of

USFS standard 5100-1C for at least 1000 hours when subjected to normal use

and when maintenance and installation are in accordance with POLARIS

recommendations.

This warranty covers parts and labor charges for repair or replacement of

defective parts and begins on the date of purchase by the original retail

purchaser. This warranty is transferable to another owner during the warranty

period through a POLARIS dealer, but any such transfer will not extend the

original term of the warranty. The duration of this warranty may vary by

international region based upon local laws and regulations.

REGISTRATION

At the time of sale, the Warranty Registration Form must be completed by your

dealer and submitted to POLARIS within ten days of purchase. Upon receipt of

this registration, POLARIS will record the registration for warranty. No

verification of registration will be sent to the purchaser as the copy of the

Warranty Registration Form will be your proof of warranty coverage. If you have

not signed the original registration and received the customer copy, please

contact your dealer immediately. NO WARRANTY COVERAGE WILL BE

ALLOWED UNLESS YOUR VEHICLE IS REGISTERED WITH POLARIS. Initial

dealer preparation and set-up of your vehicle is very important in ensuring

trouble-free operation. Purchasing a machine in the crate or without proper

dealer set-up will void your warranty coverage.

WARRANTY COVERAGE AND EXCLUSIONS

LIMITATIONS OF WARRANTIES AND REMEDIES

This POLARIS limited warranty excludes any failures that are not caused by a

defect in material or workmanship. THIS WARRANTY DOES NOT COVER

CLAIMS OF DEFECTIVE DESIGN. This warranty also does not cover acts of

God, accidental damage, normal wear and tear, abuse or improper handling.

This warranty also does not cover any vehicle, component, or part that has been

altered structurally, modified, neglected, improperly maintained or used for

racing, competition or purposes other than for which it was designed.

135

WARRANTY

This warranty excludes damages or failures resulting from improper lubrication;

improper engine timing; improper fuel; surface imperfections caused by external

stress, heat, cold or contamination; operator error or abuse; improper

component alignment, tension, adjustment or altitude compensation; snow,

water, dirt or other foreign substance ingestion/contamination; improper

maintenance; modified components; use of aftermarket or unapproved

components, accessories, or attachments; use of unapproved software or

calibration; unauthorized repairs; or repairs made after the warranty period

expires or by an unauthorized repair center.

This warranty excludes damages or failures caused by abuse, accident, fire, or

any other cause other than a defect in materials or workmanship and provides

no coverage for consumable components, general wear items, or any parts

exposed to friction surfaces, stresses, environmental conditions and/or

contamination for which they were not designed or not intended, including but

not limited to the following items:

• Wheels and tires

• Suspension components

• Brake components

• Seat components

• Clutches and components

• Steering components

• Batteries

• Light bulbs/Sealed beam lamps

• Filters

• Lubricants

• Bushings

• Finished and unfinished surfaces

• Carburetor/Throttle body

components

• Engine components

• Drive belts

• Hydraulic components and fluids

• Circuit breakers/Fuses

• Electronic components

• Spark plugs

• Sealants

• Coolants

• Bearings

LUBRICANTS AND FLUIDS

1. Mixing oil brands or using non-recommended oil may cause engine damage.

We recommend the use of POLARIS engine oil.

2. Damage or failure resulting from the use of non-recommended lubricants or

fluids is not covered by this warranty.

This warranty provides no coverage for personal loss or expense, including

mileage, transportation costs, hotels, meals, shipping or handling fees, product

pick-up or delivery, replacement rentals, loss of product use, loss of profits, or

loss of vacation or personal time.

136

WARRANTY

THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE,

AT POLARIS' OPTION, REPAIR OR REPLACEMENT OF ANY DEFECTIVE

MATERIALS, COMPONENTS, OR PRODUCTS. THE REMEDIES SET FORTH

IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY

PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO

LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF

EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT,

NEGLIGENCE, OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF

CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS

INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE

EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.

THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS

EXCLUDED FROM THIS LIMITED WARRANTY. ALL OTHER IMPLIED

WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTY OF MERCHANTABILITY) ARE LIMITED IN DURATION TO THE

ABOVE SIX MONTH WARRANTY PERIOD. POLARIS DISCLAIMS ALL

EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. SOME STATES

DO NOT PERMIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON THE DURATION

OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY

TO YOU IF INCONSISTENT WITH CONTROLLING STATE LAW.

HOW TO OBTAIN WARRANTY SERVICE

If your vehicle requires warranty service, you must take it to a POLARIS

Servicing Dealer. When requesting warranty service you must present your copy

of the Warranty Registration Form to the dealer. (THE COST OF

TRANSPORTATION TO AND FROM THE DEALER IS YOUR

RESPONSIBILITY.) POLARIS suggests that you use your original selling dealer;

however, you may use any POLARIS Servicing Dealer to perform warranty

service.

IN THE COUNTRY WHERE YOUR PRODUCT WAS

PURCHASED:

Warranty or Service Bulletin repairs must be done by an authorized POLARIS

dealer, or other qualified person. If you move or are traveling within the country

where your product was purchased, Warranty and Service Bulletin repairs may

be requested from any authorized POLARIS dealer, or other qualified person,

that sells the same line as your product.

137

WARRANTY

OUTSIDE THE COUNTRY WHERE YOUR PRODUCT

WAS PURCHASED:

If you are traveling temporarily outside the country where your product was

purchased, you should take your product to an authorized POLARIS dealer, or

other qualified person. You must show the dealer photo identification from the

country of the selling dealer's authorized location as proof of residence. Upon

residence verification, the servicing dealer will be authorized to perform the

warranty repair.

IF YOU MOVE:

If you move to another country, be sure to contact POLARIS Customer

Assistance and the customs department of the destination country before you

move. Product importation rules vary considerably from country to country. You

may be required to present documentation of your move to POLARIS in order to

continue your warranty coverage. You may also be required to obtain

documentation from POLARIS in order to register your product in your new

country. You should warranty register your product at a local POLARIS dealer in

your new country immediately after you move to continue your warranty

coverage and to ensure that you receive information and notices regarding your

product.

IF YOU PURCHASE FROM A PRIVATE PARTY:

If you purchase a POLARIS product from a private party, to be kept and used

outside of the country in which the product was originally purchased, all warranty

coverage will be denied. You must nonetheless register your product under your

name and address with a local POLARIS dealer in your country to ensure that

you receive safety information and notices regarding your product.

EXPORTED PRODUCTS

EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO

WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS PRODUCT IF IT

IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S

AUTHORIZED LOCATION. This policy does not apply to products that have

received authorization for export from POLARIS. Dealers may not give

authorization for export. You should consult an authorized dealer to determine

this product's warranty or service coverage if you have any questions. This

policy does not apply to products registered to government officials or military

personnel on assignment outside the country of the selling dealer's authorized

location. This policy does not apply to Safety Bulletins.

138

WARRANTY

NOTICE

If your product is registered outside of the country where it was purchased and

you have not followed the procedure set above, your product will no longer be

eligible for warranty or service bulletin coverage of any kind, other than safety

bulletins. Products registered to government officials or military personnel on

assignment outside of the country where the product was purchased will

continue to be covered by the Limited Warranty.

Please work with your dealer to resolve any warranty issues. Dealership

contacts can be found via this website, if needed:

www.polaris.com/en-us/contact

Should your dealer require any additional assistance, they will contact the

appropriate person at POLARIS.

This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state or in different countries. If any of the above terms

are void because of federal, state, local law, all other warranty terms will remain

in effect.

For questions call POLARIS Customer Assistance:

United States & Canada: 1-800-POLARIS (1-800-765-2747)

French: 1-800-268-6334

139

WARRANTY

140

MAINTENANCE LOG

Use the following chart to record periodic maintenance.

DATE MILES (KM)

OR HOURS

TECHNICIAN SERVICE PERFORMED /

COMMENTS

141

MAINTENANCE LOG

142

7-Way Trailer Connector ............. 44

ABS Inspection ........................110

Adding or Changing Coolant ...... 102

Age Restrictions ........................ 24

Air Filter................................. 107

Air Filter / Air Box..................... 122

Anti-Lock Braking System –

ABS (if equipped) ..................... 56

Auxiliary Outlet.......................... 36

AWD.................................. 34, 64

Axle and Wheel Nut Torque

Specifications.........................114

Battery

Charging .............................118

Installation ...........................117

Overview .............................117

Removal..............................117

Battery Maintenance ................ 122

Battery Storage ........................117

Belt Life ................................... 67

Belt Replacement .................... 104

Boarding the Vehicle .................. 76

Boots ...................................... 15

Brake Fluid............................. 109

Brake Fluid Level Sensor ............ 38

Brake Inspection ......................110

Brake Pedal ............................. 36

Brakes .................................. 109

Braking ................................... 62

Break-in Period ......................... 59

Cab Doors ............................... 25

Cargo ..................................... 66

Cargo Box

Dumping............................... 69

Check Engine Indicator............... 56

Clean the Exterior .................... 121

Cleaning and Storage ................119

Clothing................................... 15

Clutching ............................... 127

Component Locations................. 31

Cooling System....................... 102

Crankcase Emission Control

System .................................. 87

Descending Hills Improperly ........ 28

Display Units, Standard/Metric ..... 54

Drive Belt Wear/Burn................ 131

Driveline Mode.......................... 64

Driveline Mode Switch ................ 34

Drivetrain Break-In ..................... 59

Driving Downhill ........................ 74

Driving in Reverse ..................... 75

Driving Procedure...................... 71

Driving Through Water................ 74

Drying the Transmission............ 105

Electromagnetic Interference ....... 87

Electronic Power Steering ........... 42

Elevating the Vehicle for

Service ................................ 124

Engine Backfires ..................... 132

Engine Break-In ........................ 59

Engine Doesn't Turn Over ......... 132

Engine Oil ................................ 95

Engine Oil Change..................... 97

Engine Oil Check....................... 96

Engine Pings or Knocks ............ 133

Engine Runs Irregularly, Stalls

or Misfires ............................ 133

Engine Stopping ........................ 62

Engine Turns Over, Fails to

Start .................................... 132

Error Codes, Engine................... 56

European Vibration and Noise ........ 9

Exhaust Emission Control

System .................................. 87

Exhaust System Warning .......... 108

Exiting the Vehicle ..................... 76

143

Exported Products ................... 138

Eye Protection .......................... 15

Failure to Inspect Before

Operating ............................... 25

Fan, Cooling........................... 102

Filter Systems......................... 107

Fluid Change

Engine Oil ............................. 97

Front Gearcase .................... 100

Main Gearcase ...................... 99

Transmission ......................... 99

Fluid Check

Front Gearcase .................... 100

Main Gearcase ...................... 99

Transmission ......................... 99

Fluid Level

Engine Oil ............................. 96

Fluid Levels............................ 122

Fluid Part Numbers .................. 129

Fog the Engine ....................... 122

Fouled Plugs .......................... 102

Front Gearcase ....................... 100

Fuel ........................................ 94

Recommended Types.............. 94

Fuel Cap.................................. 45

Fuel Safety............................... 26

Fuel Stabilizer......................... 121

Fueling.................................... 60

Fuses ....................................115

Gasoline Handling ..................... 26

Gear Selector ........................... 32

Gearcase Specification Chart..... 100

Gearcase, Front ...................... 100

Gearcases ............................... 99

Gears, Shifting .......................... 32

Gloves .................................... 15

Hauling Cargo........................... 66

Hazard Switch .......................... 35

Headlight Replacement..............116

Headlights

Beam Adjustment ..................116

Helmet .................................... 15

Hitch....................................... 68

Hitch Removal / Installation.......... 44

Hitch Weight............................. 68

Hood ...................................... 46

Hot Exhaust Systems ................. 30

How To Obtain Warranty

Service .......................... 137-138

Ignition Switch .......................... 33

Improper Tire Maintenance .......... 29

Indicator Lamps ........................ 48

Inspect and Lubricate ............... 122

Instrument Cluster ..................... 47

Intake Alert............................... 19

Intake Screen ......................... 107

Lightning and Powerlines ............ 30

Lights..................................... 115

Limited Warranty ..................... 135

Load Capacity........................... 66

Lubricants / Service Products ..... 129

Lubrication ............................... 93

Main Gearcase ......................... 99

Maintenance Chart .................... 90

Maintenance Log..................... 141

Maintenance, Periodic ................ 89

Metric Display ........................... 54

MFG Decal............................... 11

Mode Button............................. 47

Modifications to Vehicle .............. 23

144

Near-field Communication

(NFC) .................................... 10

Noise Emission Control System .... 87

Obstacles ................................ 72

Oil and Filter ........................... 121

Oil Change

Engine ................................. 97

Front Gearcase .................... 100

Main Gearcase ...................... 99

Transmission ......................... 99

Oil Level

Engine ................................. 96

Front Gearcase .................... 100

Main Gearcase ...................... 99

Transmission ......................... 99

Oil Recommendations ................ 95

Operating on Public Roads .......... 27

Operating With a Load on the

Vehicle .................................. 25

Operation

Driving on a Sidehill ................ 73

Driving Over Obstacles ............ 72

Driving Uphill ......................... 73

Driving with a Passenger.......... 72

Parking on an Incline ............... 76

Slippery Surfaces ................... 72

Operator Safety......................... 21

Park Brake Lever....................... 37

Parking the Vehicle .................... 75

Part Numbers ......................... 129

Performance Limitation (if

equipped)............................... 55

Periodic Maintenance Chart ......... 89

Placing onto Jack Stands .......... 124

Plugs, Fouled ......................... 102

Plugs, Spark........................... 101

Polaris Products...................... 129

POLARIS Variable

Transmission System.............. 104

Polishing the Vehicle ................ 121

Power Steering ......................... 42

Power Steering Unit

Cleaning ............................. 107

Pre-Ride Inspection ................... 63

Programmable Service Interval..... 55

Protective Apparel ..................... 25

PVT Break-in (Clutches/Belt) ....... 60

PVT Drying ............................ 105

PVT Intake Screen................... 107

Radiator and Cooling Fan.......... 102

Radiator Coolant Level ............. 103

Radio

Equipment .............................. 9

Frequency ..............................9

Rear Differential System ............. 64

Rear Hitch................................ 43

Rear Hitch Certification Label ....... 43

Registration, Warranty .............. 135

Removal from Storage .............. 123

Reverse Operation..................... 75

Rider Information Center ............. 50

Rollover Protective Structure

(ROPS).................................. 42

Safe Riding Gear....................... 14

Safety Alerts

Clutch Cover Alert .................. 18

General Alert ......................... 17

Greasing Points Alert .............. 18

Jacking Points Alert ................ 18

Locations.............................. 16

Passenger Alert ..................... 19

Payload Alert ......................... 19

Tire Pressure Alert .................. 19

Safety Labels and Locations ........ 16

Scrambler XP 1000 S

Fuel Alert ........................... 20

Sportsman XP 1000 S

145

Fuel Alert ........................... 20

Safety Symbols ........................... 8

Safety Training.......................... 13

Safety, Winch Maintenance.......... 85

Seat Belt.................................. 40

Seat Belts ................................ 25

Seat Removal ........................... 40

Seat Vibration ......................... 127

Seats ...................................... 39

Shift Alert (7183987) .................. 17

Shifter ..................................... 32

Shock Compression ..................113

Shock Loading the Winch ............ 84

Signal Words ..............................8

Spark Arrester ....................87, 108

Spark Plug Inspection............... 101

Spark Plug Recommendations ... 101

Specifications ......................... 125

Spring Preload (EPS Deluxe) ......112

Spring Preload (EPS) ................112

Stabilize the Fuel..................... 121

Stalling While Climbing a Hill........ 28

Starting the Engine .................... 61

Steering Wheel Inspection......... 106

Steering Wheel, Adjustment......... 42

Stopping the Engine................... 62

Storage ................................. 121

Storage Area .......................... 123

Storage Compartment Access...... 40

Storage Compartment, Under-

Seat ...................................... 40

Suspension Settings (EPS

Deluxe).................................112

Suspension Settings (EPS).........112

Switches.................................. 33

Ignition Switch ....................... 33

Mode Button.......................... 47

Winch Switch......................... 34

Tachometer .............................. 47

Throttle Pedal ........................... 37

Tire Tread Depth ......................114

Tires ......................................114

Torque, Axle Nuts .....................114

Torque, Wheel Nut ....................114

Towing .................................... 70

Towing a GENERAL ................... 70

Towing Loads ........................... 68

Towing Speed ........................... 68

Transmission ............................ 99

Drying ................................ 105

Oil ....................................... 99

Transporting the GENERAL ....... 123

Turning Improperly..................... 27

Unauthorized Use of the Vehicle ... 30

Under-Seat Storage ................... 40

Vehicle Identification Numbers ..... 11

Vehicle Immersion ................... 106

Warning Symbols ........................ 8

Washing the Vehicle..................119

Washing Tips.......................... 120

Water, Immersion of Vehicle....... 106

Welcome Page ...........................3

Wet Fouled Plug...................... 102

Wheel Installation ..................... 115

Wheel Nut Inspection ................114

Wheel Nut Torque.....................114

Wheel Removal........................114

Winch Cable Care ..................... 83

Winch Maintenance and

Service Safety ......................... 85

Winch Operation ....................... 79

Winch Safety Precautions ........... 77

Winch Shock Loading................. 84

Winch Switch............................ 34

146

For your nearest Polaris dealer,

visit www.polaris.com

Polaris Sales Europe Sarl

Place de l’Industrie 2

1180 Rolle

Switzerland

Part . 9940077 Rev 0 No 2

Produktspecifikationer

Varumärke:	POLARIS
Kategori:	Inte kategoriserad
Modell:	GENERAL 1000 Deluxe (2022)
Typ av operation:	Touch
Färg på produkten:	Aluminium
Vikt:	4500 g
Bredd:	550 mm
Sladdlängd:	1.5 m
Energieffektivitetsklass (gammal):	A++
Antal lampor:	- gloeilamp(en)
Höjd (min):	300 mm
Höjd (max):	750 mm
Strömlampa:	9.5 W
Internationell säkerhetskod (IP):	IP20
Typ av strömkälla:	AC
Ursprungsland:	Duitsland
Material:	Aluminium, Plastic, Steel, Zinc
Lichtstroom:	680 lm
Lampans livslängd:	50000 uur
Färg ljus:	Cool white, Warm white
Färgåtergivningsindex (CRI):	80
Ljusintensitet:	1000 Lux
Lämplig för typ av ljus:	Oriëntatie
Driftspänning:	14 V
Underredes bredd:	250 mm
Färgtemperatur (max):	6500 K
Lämplig plats:	Home office, Office, Study
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Djup botten:	250 mm
Höjd på piedestal:	8 mm
Färgtemperatur (min):	2700 K