Pro-Ject Power Box RS2 Phono Bruksanvisning
Pro-Ject
hi-fi system
Power Box RS2 Phono
Läs gratis den bruksanvisning för Pro-Ject Power Box RS2 Phono (3 sidor) i kategorin hi-fi system. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 3.5 recensioner. Har du en fråga om Pro-Ject Power Box RS2 Phono eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
INSTRUCTIONS FOR USE
Pro- RS2 PhonoJect Power Box
© Pro-Ject Audio Systems · Pro Ject Power Box - RS2 Phono . . · Revision 2022 01 03
2
Dear music lover,
T -J A . hank you for purchasing a Pro ect udio Systems Power Box RS2 Phono
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety Instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
Never handle the device while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, such as a flower vase on
or near the device. Never spill any liquid on the device. Never place any naked flame sources, such as
lighted candles on or near the device. The product shall not be used in damp or wet locations, next to a
bathtub, sink, swimming pool or any other similar conditions.
Using the product
Power Box RS2 Phono is designed to power a wide range of DC-powered Ject turntables with Pro- 15V and
p hono preamplifiers with 18V or 20V.
Make all connections whilst the Power Box RS2 Phono is
switc
switc
switc
switcswitched o
hed o
hed o
hed ohed off or
ff or
ff or
ff orff or d
d
d
d disc
isc
isc
iscisco
o
o
oonnec
nnec
nnec
nnecnnected fr
ted fr
ted fr
ted frted from
om
om
omom t
t
t
t the ma
he ma
he ma
he mahe main
in
in
inins
s
s
ss
.
Interconnection cables are included in the packaging. Original power supplies are no longer
required. Ensure that you use the correct cable for your device: The cables are marked on both ends.
In case of any doubts, consult user manuals of all connected products or ask your dealer.
Make sure that Input AC selector matches mains voltage in your country
M ain power switch
The toggle switch on the front panel turns the unit on or off. The blue LED above the switch shows that the unit
is switched on.
Led indicators
The LEDs
Tur
Tur
Tur
TurTurntable
ntable
ntable
ntablentable and Ph
Ph
Ph
PhPhono Sta
ono Sta
ono Sta
ono Staono Stage
ge
ge
gege
on the front indicate that a device is connected.
All Pro-Ject Phono Boxes with 18V or 20V can be powered with the
P
P
P
PPhon
hon
hon
honhono S
o S
o S
o So Sta
ta
ta
tatage
ge
ge
gege Out
Out
Out
Out Outpu
pu
pu
puput
t
t
tt
.
© Pro-Ject Audio Systems · Pro Ject Power Box - RS2 Phono . . · Revision 2022 01 03
3
Technical specifications Pro- Ject Power Box RS2 Phono
Input Power supply: 115V/230V AC
Output voltage/current/ripple 1 x 15V ±0,5% / 2A / max. 35mV pp
Output voltage/current/ripple ± ± A 1 x 18V 0,5% / 2 / max. 50mV pp
Dimension (W x D x H): 206 x 209 x 71
Weight: 2930 g
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit
be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons, release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2022. All rights reserved.
The information was correct at the time of going to
press
. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
Declarat
Declarat
Declarat
DeclaratDeclaration of Conformit
ion of Conformit
ion of Conformit
ion of Conformition of Conformity
y
y
yy
We, C
C
C
CCanor sp
anor sp
anor sp
anor spanor spol. s
ol. s
ol. s
ol. sol. s r.o
r.o
r.o
r.o r.o.
Družstevná 13925/39
0 8006 Prešov
Slovakia
(manufacturer)
and
Pro
Pro
Pro
ProPro-
-
-
--Ject Audio
Ject Audio
Ject Audio
Ject AudioJect Audio Systems
Systems
Systems
Systems Systems a division of Audio Tuning GmbH
Margaretenstrasse 98
1050 Vienna,
Austria
(distributor)
declare under our responsibility that the product is in conformity with the provisions of Directives:
2014/35/EU including amendments
2014/30/EU including amendments
STN EN 62368-1:2015 - Safety
STN EN 55035:2018 - - Electromagnetic compatibility of multimedia equipment Immunity requirements
STN EN 55032:2015 - – Electromagnetic compatibility of multimedia equipment Emission requirements
Produktspecifikationer
| Varumärke: | Pro-Ject |
| Kategori: | hi-fi system |
| Modell: | Power Box RS2 Phono |
Behöver du hjälp?
Om du behöver hjälp med Pro-Ject Power Box RS2 Phono ställ en fråga nedan och andra användare kommer att svara dig
hi-fi system Pro-Ject Manualer
11 Augusti 2025
10 Augusti 2025
10 Augusti 2025
10 Augusti 2025
10 Augusti 2025
3 Augusti 2025
3 Augusti 2025
28 Februari 2025
7 Januari 2025
6 Januari 2025
hi-fi system Manualer
- Lynx
- OneConcept
- Crystal Video
- Dali
- Hama
- Ibiza Sound
- Vision
- Technisat
- Ebode
- Revox
- Tannoy
- Soundstream
- Sony
- Ferguson
- Bose
Nyaste hi-fi system Manualer
17 September 2025
17 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025