Proaim CG219 Bruksanvisning
Proaim
Inte kategoriserad
CG219
Läs gratis den bruksanvisning för Proaim CG219 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12 recensioner. Har du en fråga om Proaim CG219 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Universal DSLR Camera Cage (CG219)
A s s e m b l y M a n u a l
Camera Cage with slide bars
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Allen Keys Sizes:
(3/16mm,4mm & 3mm)
Top Handle
Wooden Side Handle
Top Plate Camera Plate
2 x Slide Bars
2
DSLM Camera Cage Setup
• Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
aach it to the boom part of the camera
cage.
Top Handle
• Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserng both the Allen
bolts on the top plate.
• Place the top handle above the top plate.
NOTE: The provided mulple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
• Aer placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the buon head, and ght it
with the help of a 4mm Allen key.
• Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
• Then secure it with the help of a 3/16mm
allen key.
NOTE: You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.
3
• The wooden side handle is now properly ght.
Interchange Slide Bars
• Then remove the buon head from both sides
of the camera cage with the help of a 4mm
Allen key.
• Match the provided screw hole on the boom
of the camera plate with the camera
hole and screw it ghtly with(Not Included)
the help of a screwdriver.
Side Handle
• Match the wooden side handle with the side
thread of the camera cage and insert the side
handle and ghten it properly with its knob.
NOTE: You can hold the handle anywhere on the
provided mulple threads of the Camera Cage
according to your requirement.
• Loosen the knob of the wooden side handle
and remove the handle.
• Aach the Camera (Not Included) into the
Camera cage properly by sliding it onto the
shoe mount on the top plate.
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Inte kategoriserad |
| Modell: | CG219 |
Behöver du hjälp?
Om du behöver hjälp med Proaim CG219 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Januari 2025
29 Januari 2025
28 December 2024
28 December 2024
28 December 2024
Inte kategoriserad Manualer
- Point Source Audio
- Ferplast
- Manfrotto
- Ergodyne
- Ameristep
- Dangerous Music
- Cisco
- Becken
- Daikin
- Now TV
- Heritage Audio
- Goldtouch
- Standard Horizon
- Showtec
- Binatone
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025