Proaim CT-SDCF-CV4 Bruksanvisning
Proaim
Platt panelstöd
CT-SDCF-CV4
Läs gratis den bruksanvisning för Proaim CT-SDCF-CV4 (8 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Proaim CT-SDCF-CV4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Soundchief Channel Cart (CT SDCF CV4) - -
A s s e m b l y M a n u a l
1 x Cup Holder
2 x Safety Hook
1 x Boom Pole Holder Kit
2 x 16'' Wheels
2 x Antenna holder
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Proaim Soundchief CV4 Cart with
1 x Height Adjustable Shelf and
1 x Headphone Holder
1 x Sliding Shelf Boom self
Wrench (10 11) & Allen key -
(4mm, 5mm, 5/16”)
Tablet
Holder 1 x 4u 19'' Rack Adapter Kit
2
• Loosen the bolts of the Sound chief channel
cart with an Allen key 5/16" Allen key.
• Match the center hole of the wheels and cart,
and insert the bolt into the wheel.
• Aach the wheel to the cart by removing the
bolt.
Soundchief Channel Cart Setup
• Properly ght the bolt with a 5/16" Allen key
and follow the same process for the other
side of the wheel.
• Both the wheels are properly aached to the
Sound Chief Channel Cart, as shown in the
image
• Remove the knob of the boom shelf.
Boom Plate
3
• Remove the bolts on both sides of the boom
plate with the help of a 5mm Allen key.
• Then properly ght bolt with 5mm Allen key.
• Aach the boom plate to the boom of the
cart, and insert the side bolt matching the
hole of the cart panel and the plate.
• To aach the boom plate to the cart, secure
it properly with the help of a knob.
• For side security, rstly remove the buon
head with a 5mm Allen key and slide the
Boom Channel Support Plate to align it.
• Then insert the buon head by ghtening it
properly with a 5mm Allen key.
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Platt panelstöd |
| Modell: | CT-SDCF-CV4 |
Behöver du hjälp?
Om du behöver hjälp med Proaim CT-SDCF-CV4 ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
7 December 2024
7 December 2024
7 December 2024
23 September 2024
22 September 2024
Platt panelstöd Manualer
- Premier Mounts
- Manhattan
- Fellowes
- Erard
- Rocstor
- Crimson
- Sanus
- Helder
- BakkerElkhuizen
- Chief
- Gabor
- Gembird
- Pioneer
- Unicol
- Tripp Lite
Nyaste Platt panelstöd Manualer
8 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025