Proaim CT-VNGD-CS Bruksanvisning
Proaim
Platt panelstöd
CT-VNGD-CS
Läs gratis den bruksanvisning för Proaim CT-VNGD-CS (4 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 10 recensioner. Har du en fråga om Proaim CT-VNGD-CS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
1 x Top Part of Cart
1 x Spanner (13)
1 x Allen key (6mm)
Vanguard Collapsible Cart for Holding C stands -
(CT-VNGD- CS)
2 x Side Extension
4 x Bolts
2 x Pneumac wheels
1 x Base Part of Cart
2
• Follow the same process on the other
side extension.-
Vanguard Cart Setup
• To aach the pneumac wheels, remove the
side bolt of the wheel shank on the base part
with the help of an Allen key.
• Insert the wheel into the wheel shank and
secure by inserng a bolt.
• Aaching the side extension to the base part,
insert the bolt and secure with the help of a
nut.
• Tighten the bolt properly from both the sides
with the help of the spanner.
• Then ghten it properly with the help of an
Allen key. Follow the same process to aach
the other wheel as well.
• NOTE: The C stand cart rolls incredibly smooth -
and silent with reliable and lightweight two
front Pneumac wheels and two rear swivel
caster wheels with brakes.
3
YOUR PROAIM VANGUARD CART FOR HOLDING C STANDS-
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Then insert the nut & bolt and properly secure
with the help of the spanner.
• Finally, the top part has been properly
aached to the cart.
NOTE: It has two D shaped sturdy handles on -
the top of the cart for a solid and comfortable
hold.
• Aach the top part matching both the side
extensions.
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Platt panelstöd |
| Modell: | CT-VNGD-CS |
Behöver du hjälp?
Om du behöver hjälp med Proaim CT-VNGD-CS ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
7 December 2024
7 December 2024
7 December 2024
23 September 2024
22 September 2024
Platt panelstöd Manualer
- Ateca
- Multibrackets
- Twelve South
- V7
- Premier Mounts
- Dataflex
- Newstar
- SIIG
- Wentronic
- Sanus
- Steren
- Planar
- Techly
- Peerless-AV
- Kensington
Nyaste Platt panelstöd Manualer
8 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025