Proaim P-MTWP-01 Bruksanvisning


Läs gratis den bruksanvisning för Proaim P-MTWP-01 (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Proaim P-MTWP-01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
MicroTilt Wedge Camera Plate (P-MTWP-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
MicroTilt Wedge Camera Plate
Whats In The Box
2 x Camera Bolts
(Size: 3/8”-16)
2
MicroTilt Wedge Camera Plate Setup
The camera plate is now securely aached.
Remove the castle ring from the uid head
(Not Included) and mount it on the stand
(Not Included).
Once the uid Head is mounted, ghten the
castle ring securely.
Slide the wedge plate with the camera plate
onto the uid head, as shown in the image.
Once in place, securely lock the wedge plate
onto the uid head.
Aach Camera Plate to MicroTilt Wedge Camera Plate
Mounng Fluid Head on Stand
Slide Micro Tilt Wedge Camera Plate to Fluid Head
Aach the camera plate (Not Included) to the
wedge plate and ghten it with a screwdriver
(Not Included).


Produktspecifikationer

Varumärke: Proaim
Kategori: ej kategoriserat
Modell: P-MTWP-01

Behöver du hjälp?

Om du behöver hjälp med Proaim P-MTWP-01 ställ en fråga nedan och andra användare kommer att svara dig