Proaim VI-GLDE-01 Bruksanvisning
Läs gratis den bruksanvisning för Proaim VI-GLDE-01 (7 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6.5 recensioner. Har du en fråga om Proaim VI-GLDE-01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A s s e m b l y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Glide 4 Dimensional Vibraon Isolator -(VI GLDE- -01)
Proaim Glide Vibraon Isolator
Castle Nut Wrench
2 x T– Type Allen Key
(3/16mm, 3mm)
Hard Case
2
Loosen the Castle ring of the Glide Vibraon
Isolator with a Castle nut wrench and remove
it.
Glide Vibraon Isolator Setup
Then, aach the Glide Vibraon Isolator to the
arm.
Tighten the castle ring properly with the help
of a castle nut wrench.
Aach the uid head properly (Not Included)
by inserng it to the boom part of the
vibraon isolator.
The Vibraon Isolator is now properly
aached to the arm.
3
Then, remove the Mitchell Plate bolts with
the help of an Allen key.
Loosen and remove the castle ring from the
Gimbal Mitchell plate .(Not Included)
Insert the bolt to properly aach the
Mitchell Plate and Freey Movi
(Not Included) Boom Mounng Part, then
ghten the bolt with the help of Allen Key.
Match the threads of the Mitchell Plate to
The Castle Nut and aach them together,
then insert the bolt. Tighten it properly using
the Allen key.
Mitchell plate and Freey Movi
(Not Included) boom mounng part have
been properly aached to each other.
Separate the Mitchell plate from the Castle
nut and aach it to the Freey Movi boom
mounng.
Gimbal Mitchell Plate with Castle Lock Mount For Freey Movi/
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Stativ |
| Modell: | VI-GLDE-01 |
Behöver du hjälp?
Om du behöver hjälp med Proaim VI-GLDE-01 ställ en fråga nedan och andra användare kommer att svara dig
Stativ Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Januari 2025
7 December 2024
25 September 2024
Stativ Manualer
- IOptron
- Gitzo
- Kodak
- Easyrig
- Testo
- HPRC
- Rode
- Auray
- Gravity
- E-Image
- Bresser
- ARRI
- Eurolite
- DataVideo
- Manfrotto
Nyaste Stativ Manualer
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025