Proaim CM-ACKG-02 Bruksanvisning
Läs gratis den bruksanvisning för Proaim CM-ACKG-02 (4 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 14 recensioner. Har du en fråga om Proaim CM-ACKG-02 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Acon King Sucon Mount Car Camera Rigging -8”
System (CM ACKG 02) - -
A s s e m b l y M a n u a l
2x 8''Sucon Cup
3 x 6'' pipe with 48mm OD 2x Safety Straps
5 x 360° Rotang Speed Rail Clamp 2 x Washer
Flight Case
Bolt and 5mm Allen Key
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
What s In The Box’
2
• Press the hidden buon on the bumper panel
in the front of the vehicle, and remove it, as
shown in the image.
• Loosen and remove the washer from the 6''
pipe quickly with the help of a 5mm Allen key.
• Insert a toe hook into the
(Not included)
hidden panel and ghten it correctly.
NOTE: The toe hook's purpose is to help you
set up your setup easily.
6'' pipe with 360° Rail Clamp Setup
• Now, place one washer on the top of the toe
hook such that their holes align with each
other. Screw in the other washer from the
boom.
• Now, loosen the 360° rotang speed rail
clamp and aach one end to the 6" pipe.
• Insert the washer screw into the 6" pipe, then
ghten them properly with the help of a 5mm
Allen key.
3
• Insert the rod into the other
(Not Included)
end of the speed rail clamp and ghten it
correctly with the help of a 5mm Allen key.
• Place your sucon cup in the selected posion
on the car surface. Next, press the sucon
pump to create a vacuum between the
sucon cup and the car surface. Finally,
release the pump to mount the sucon cup
properly.
• Insert the 6" pipe on the sucon cup into one
end of the 360° rotang speed rail clamp.
Then, insert a rod into the
(Not included)
other end of the clamp.
• Although the sucon cup holding force is
adequate for regular driving shots, you must
use safety belts/tension straps for addional
security. When mounted on cars, properly
secure the objects aached to the sucon cup
(e.g. camera, gimbal, etc.). Use rubber sleeves
to avoid dents and scratches on car paint.
Tighten safety straps carefully to prevent
damages.
• Aer inserng the rod, ghten the clamp
properly with the help of a 5mm Allen key.
Sucon Cup Setup
To guarantee proper adhesion of sucon cups, check that the cup surfaces & mounng surface is clean,
dry & dust free. Please mount it on smooth, even & non porous surfaces. - -
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Stativ |
| Modell: | CM-ACKG-02 |
Behöver du hjälp?
Om du behöver hjälp med Proaim CM-ACKG-02 ställ en fråga nedan och andra användare kommer att svara dig
Stativ Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Januari 2025
7 December 2024
25 September 2024
Stativ Manualer
- Hohem
- Velleman
- GoPro
- Studio Assets
- Carson
- Swarovski
- Vixen
- Slidekamera
- Manfrotto
- Fat Gecko
- Olloclip
- Vinten
- Sunpak
- Alpine
- Explore Scientific
Nyaste Stativ Manualer
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025