Projecta DBM100 Bruksanvisning

Läs gratis den bruksanvisning för Projecta DBM100 (10 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Projecta DBM100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/10
WARNING
Before installation, please make sure that the vehicle is stationary, the engine is switched off and cool.
This product is designed for use in vehicles with a 12V or 24V electrical system ONLY.
Be careful when laying wires, not to cause any electrical shorts or wire breakage.
FEATURES
L.E.D DUAL VOLTAGE DISPLAY
Sharp and crisp coloured LED display allows you to monitor the condition of your batteries.
HIGH/LOW VOLTAGE ALARM
The DBM100 alerts you with a buzzer and visual display indicating high or low battery voltage warning allowing you to
maintain your batteries in peak condition and get the most from your dual battery system.
ADJUSTABLE DAYTIME/NIGHT-TIME BRIGHTNESS
Adjust between 3 levels of daytime/night-time brightness.
AUTOMATIC DIMMER
Wire to the vehicles head lamp circuit for automatic dimming when head lamps are switched on for
more comfortable night viewing.
DUAL VOLTAGE
Suitable for 12 and 24V batteries (0–36V)
BATTERY MONITORING
Can check the battery status when ignition is off by pressing the button on the side.
WIRING DIAGRAMS
INSTALLATION
1. Disconnect the negative (-) battery cables from battery 1 &
battery 2.
2. Connect the 5 wires as per the WIRING DIAGRAMS.
3. Reconnect the negative (-) battery cables to battery 1 &
battery 2.
4. Turn on the engine and check that the DBM100 is working.
5. Clean the surface of the location where you intend to
attach the meter.
6. Use the provided double-sided tape to stick the meter to
the surface.

Produktspecifikationer

Varumärke: Projecta
Kategori: Batteriladdare
Modell: DBM100

Behöver du hjälp?

Om du behöver hjälp med Projecta DBM100 ställ en fråga nedan och andra användare kommer att svara dig