Pure Acoustics Jolt X225 Bruksanvisning


Läs gratis den bruksanvisning för Pure Acoustics Jolt X225 (2 sidor) i kategorin mediaspelare. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5.5 recensioner. Har du en fråga om Pure Acoustics Jolt X225 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
1.Power key: on/off.
2.Mute
3.Pause/Play
4.Previous
5.Next
6.Volume +
7.Volume -
Remote Control
8.Setting
9.Return
10.Play by AUX Mode
11.Play by Bluetooth model
12.Play by USB/TF card
Precautions
Smart Android Music Controller
4inch Touch Screen Amplier
Please read this user manual carefully before use the device
and keep the manual properly.
Note : Appearance of the device and main interface of system
are for reference only . Please refer to the actual product for
details.
The company continuously improves product performance, and
design specifications are subject to change without notice.
1. Power Switch: turn right to power ON and turn left to power OFF.
2. Host Switch Key: long press for 2 seconds to turn on, long press for 2
seconds to turn off, short press for lock screen/unlock.
3. 3.5 Audio Input: 3.5mm Audio wire .
4. Micro-USB: USB disk up to 32GB.
5. TF Card: up to 32GB.
6. Power Terminal: Compatible AC90-250V power supply, power cable with two
strands of copper core wire,single strand copper core over 0.75mm².
7. SPK R+ & SPK R-: 4 Speakers(each RMS25W/4-8Ω) Speaker wire 200cores.
RVH2X100, RVH2X200.
8. OUT R + OUT L + GND: for an extra amplier or active subwoofer, audio
output wire: Audio wire (three core shielded wire: commonly known as
microphone wire). RVVP2X0.5, RVVP2X0.75mm².
9. AUX L + AUX R + GND: audio input wire: Audio wire (three core shielded wire:
commonly known as microphone wire). RVVP2X0.5, RVVP2X0.75.
10. RJ45: Connect network cable .
Figure 1
Figure 2
1. This host is suitable for AC90-250 power supply, please install and debug under the
guidance of professionals.
2. Please read this manual carefully and follow the installation instructions strictly.
3. Please check the binding posts carefully for speaker cables, power cables, and audio
input cables.
4. Make sure that all connecting lines are accurate before turning on the computer.
5. Please do not modify, dismantle, repair or upgrade the host by yourself.
6. When not using the main unit for a long time, please turn off the main power switch.
1Pre-embed attached back cover size 80x80mm, depth is 57mm.
2Tighten the bracket on the 86 cassette with bracket screws. (As shown in
Figure 1)
3Tighten the wire inside the back cover to the corresponding function terminal
on the device. Then insert the terminals into the binding post. Then put the
device into the bracket and push down to fix the device. (As shown in Figure 2)
External Interface Diagram
1
2
789
1 0
2Channel


Produktspecifikationer

Varumärke: Pure Acoustics
Kategori: mediaspelare
Modell: Jolt X225

Behöver du hjälp?

Om du behöver hjälp med Pure Acoustics Jolt X225 ställ en fråga nedan och andra användare kommer att svara dig