Pyle PLCMTR92.5 Bruksanvisning
Pyle
Backkamera
PLCMTR92.5
Läs gratis den bruksanvisning för Pyle PLCMTR92.5 (7 sidor) i kategorin Backkamera. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4.5 recensioner. Har du en fråga om Pyle PLCMTR92.5 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
PLCMTR92.5
9'' Display Monitor (DC 12-24V for Bus, Truck, Trailer, Van)
Waterproof Rated Backup Camera & Monitor System
www.PyleUSA.com
PLCMTR - Commercial Grade Camera System
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
To ensure your safety, the driver should not watch videos or operate features on the
monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to
repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair
facility. Please observe and obey the local laws and regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the vehicle's safety
features, wiring, components, etc. We are not responsible for any damages, injury,
malfunctions or otherwise noted due to faulty or non-professional installation.
Connection
Connect the camera's threaded locking 4-pin cable connectors into the female receiving
connection of the included 4-pin extension cable. The extension cable then connect to
your compatible video monitors with 4-pin receiving connector. The threaded locking
cable connectors of the camera serve to provide power and video for the camera.
Please remember to disconnect your vehicle's battery prior to any connection / installation.
Use the included wiring harness to provide power and video signals to your monitor.
There are colored wires to assist in the video camera system setup.
See the wiring diagram for connections between cameras, monitor and your vehicle
2
When turning the vehicle's ignition key or turning to the accessory or ON
position, power is supplied to the camera system through the control box and
the monitor will be in stand-by mode.
www.PyleUSA.com
3
PLCMTR - Commercial Grade Camera System
Wiring & Connection Camera
(4-Pin Connection)
Red: Power 12/24V
Black: GND
Green: +12V Reverse
*For additional information visit www.PyleAudio.com
Video
Connectors
Display Monitor
Power &Video
Wiring Harness
POWER: DC 12V
GND
+12V Reverse
*When the Green - Reverse Trigger - is connected, the
system will automatically revert to this connection
once the vehicle is placed into reverse gear. This is
connected to the camera via 4-Pin connection.
*The monitor control allow the user
to adjust picture settings horizontal
or vertical based on the mounting
location of the camera.
*Please note: The monitor may
include a 'volume' function in the
menu settings. This feature is not
available for this model.
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | Backkamera |
| Modell: | PLCMTR92.5 |
Behöver du hjälp?
Om du behöver hjälp med Pyle PLCMTR92.5 ställ en fråga nedan och andra användare kommer att svara dig
Backkamera Pyle Manualer
6 December 2024
29 Augusti 2024
26 Augusti 2024
26 Augusti 2024
26 Augusti 2024
26 Augusti 2024
25 Augusti 2024
24 Augusti 2024
22 Augusti 2024
20 Augusti 2024
Backkamera Manualer
- Kenwood
- Alpine
- Beeper
- VDO Dayton
- Dometic
- Valeo
- Xzent
- Luis
- Conrad
- Furrion
- Pro-User
- Elro
- Mobiset
- CRUX
- Marquant
Nyaste Backkamera Manualer
21 Februari 2025
31 December 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
20 December 2024
26 Oktober 2024
26 September 2024
26 September 2024