Pyle PLCMTR7250 Bruksanvisning

Pyle Backkamera PLCMTR7250

Läs gratis den bruksanvisning för Pyle PLCMTR7250 (5 sidor) i kategorin Backkamera. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 12 recensioner. Har du en fråga om Pyle PLCMTR7250 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

USER

MANUAL

PLCMTR7250

Waterproof Rearview Backup Camera & Video Monitor

System Kit, Angle Adjustable Night Vision Cam, 7" Display,

Front and Rear Vehicle Mounting

Please read instructions carefully before installation and use. Installation

should be performed by a professional installer. To ensure your safety, the

driver should not watch videos or operate features on the monitor while

driving. There are no serviceable parts in this unit, do not disassemble or

try to repair this unit. If the unit malfunctions please return to your vendor

or send to a Pyle repair facility. Please observe and obey the local laws and

regulations when installing the unit.

Upon Installation, please make sure as to not to interfere with any of the

vehicle's safety features, wiring, components, etc. We are not responsible

for any damages, injury, malfunctions or otherwise noted due to faulty or

non-professional installation.

Connection

Connect the camera's threaded locking 4-pin cable connectors into the female

receiving connection of the included 4-pin extension cables. The extension

cables then connect to your compatible video monitors with 4-pin receiving

connectors. The threaded locking cable connectors of the camera serve to

provide power and video for all cameras.

Please remember to disconnect your vehicle's battery prior to any connection /

installation. Use the included wiring harness to provide power and video signals

to your monitor. There are colored wires to assist in the video camera system setup.

See the wiring diagram for connections between cameras, monitor and your vehicle.

Wiring & Connection

The Reverse trigger cable is for the Ch1 and , connect the front view camera Ch2

to the Ch2,connect the reverse backup camera to the Ch1, when the truck in reverse

status, the reverse camera would be priority.

(V1 front view image)

Produktspecifikationer

Varumärke:	Pyle
Kategori:	Backkamera
Modell:	PLCMTR7250
Färg på produkten:	Black, Stainless steel
Sladdlängd:	1.6 m
Husmaterial:	Roestvrijstaal
Tillgångar:	500 W
Justerbar termostat:	Ja