Pyle PSTNDW15 Bruksanvisning

Pyle högtalarstöd PSTNDW15

Läs gratis den bruksanvisning för Pyle PSTNDW15 (3 sidor) i kategorin högtalarstöd. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om Pyle PSTNDW15 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

PSTNDW15

Adjustable Wall Mount Speaker Bracket

User's Manual

www.pyleaudio.com

Thank you for purchasing Pyle's PSTNDW15 Universal Wall Mount

Speaker Bracket.

Specifications:

At upright 90° position, you can mount At 30° tilt down position, you can mount

a 22” deep speaker cabinet. a 30” deep speaker cabinet.

Adjustable tilt feature allows you to mount a 30” speaker cabinet

• Distance From Wall: 12.5"

• Weight Capacity: 80 lbs.

• Tilt Angle Adjustment: 90°-30°

• Swivel Angle Adjustment: ±30°

• Standard 1 3/8" insert fits most speaker cabinets

• Added solid-steel pin serves as a safety- stop

• Construction: Steel

Installation Instructions:

• Required Tools: socket or hand wrench, drill,

drill bit, stud finder, pencil, level, tape

measure, (4) 3/8” x 4” lag bolts

Step #1: Remove brackets from box.

Step #2: Check for stud location

with a stud finder and place speaker bracket in

desired location.

Step #3: Test that the bracket plate is level

and mark the hole locations on the wall using

the holes from bracket backer plate as a

template.

Step #4: Drill proper mounting hole (smaller

than outer thread diameter of your lag bolts)

through wall into wood studs or concrete

block. Hole depth should be properly drilled so

that your lag bolt can go through the sheet

rock and 2” into the stud.

Step #5: Place speaker bracket on wall and

install 3/8” lag bolts (recommended) in the

upper location. Securing tightly until the head

of the lag bolt is firmly against the bracket.

Repeat for bottom location.

Step #6: Before placing the speaker cabinet

on the bracket, test installation by confirming

the bracket will hold the weight of your

speaker. If desired, tilt the angle of the bracket

downward to the desired angle and tighten the

bolts to lock in place.

Step #7: Place the speaker on the cabinet by inserting the vertical sleeve into the

speaker cabinet’s internal adapter. Be sure the speaker is secure before releasing it.

Test installation with speaker in vertical and tilted positions to be sure the bracket stays

firmly against the wall.

Produktspecifikationer

Varumärke:	Pyle
Kategori:	högtalarstöd
Modell:	PSTNDW15
Typ av operation:	Draaiknop
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Vikt:	1945 g
Bredd:	600 mm
Djup:	485 mm
Höjd:	- mm
Nettoskatt:	206 W
Ljudnivå:	61 dB
Snäll:	Muurmontage
Antal motorer:	1
Maximal utsugskapacitet:	330 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Antal lampor:	2 gloeilamp(en)
Soort vetfilter:	Aluminium
Höjd (min):	815 mm
Höjd (max):	1160 mm
Strömlampa:	28 W
Antal filter:	2 stuk(s)
Antal hastigheter:	3
Placering:	Vägg
Lutningsvinkel:	90 - 30 °
Produktens färg:	Svart
Vridningsvinkel:	30 °
Avstånd till väggen (max):	317.5 mm