Pyle PVNP30BT Bruksanvisning
Pyle
Skivspelare
PVNP30BT
Läs gratis den bruksanvisning för Pyle PVNP30BT (2 sidor) i kategorin Skivspelare. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11.5 recensioner. Har du en fråga om Pyle PVNP30BT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
MODEL : PVNP30BT
OPERATING INSTRUCTIONS
Please read before use
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SPECIFICATION
Frequency Range : AM:540-1700kHz (AM = MW)
: FM 88-108MHz
POWER SOURCE :
120V AC
SPEAKER OUTPUT : 1.5W
SPEAKER SIZE : 40x90mm, 8ohm 3W x 2
SPEAKER WATT :
2 x 3W
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4. Phono function
Turn the “Function” Knob (1) to Phono. Place the record onto the turntable (18). Select the turntable speed
by sliding the “33/45/78 rpm” switch (23) on the right side of the turntable. Unlock the tone arm (21) by
release the lock (25), then lift up the tone arm and gently place the tone arm onto the record to play. If want
to stop, lift up the tone arm and place it back to the arm rest (25).
Re-mark:
1. If you want the turntable mechanism stop at the end of the record, select “Auto Stop” selector switch (26)
at “On” position. If the record stops playing before the end of the record, select “Auto Stop” selector switch
(24) “Off” position. The turntable mechanism will continuous to spin.
2. Place the 45rpm adaptor (19) t the centre before placing 45 rpm record onto the turntable.
5. Bluetooth function
Turn the “Function” Knob (1) to Line In. It will automatically assign to Bluetooth function and will sound. Also,
there is a Red/blue led light located at the bottom of the dial scale will flash alterively. Activate your Bluetooth
device and search for ID(Speaker) and connect. Once the unit is connected with the Bluetooth device, the
led light location on the bottom of the dial scale will flash in only blue color. Then select songs by control
your Bluetooth device.
6. Line in function
Turn the “Function” Knob (1) to Line In. It will automatically assign to Bluetooth function. Plug in the Aux-in
cable into the “Line-in Jack”(9), it will change to line-in function. Connect the other end of the Aux-in cable to
other external audio source to start playback.
7. RCA (L/R) Output Function
Using the RCA Cable to connect the RCA (L/R) output jack (28) at the rear of the unit to any external
amplifier RCA input jack to play music from external source.
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | Skivspelare |
| Modell: | PVNP30BT |
Behöver du hjälp?
Om du behöver hjälp med Pyle PVNP30BT ställ en fråga nedan och andra användare kommer att svara dig
Skivspelare Pyle Manualer
4 Januari 2025
9 Oktober 2024
30 September 2024
19 September 2024
19 September 2024
28 Augusti 2024
25 Augusti 2024
24 Augusti 2024
21 Augusti 2024
18 Augusti 2024
Skivspelare Manualer
- Angels Horn
- Denon DJ
- Jam Audio
- Zedar
- Sogo
- Denver
- Sherwood
- Teac
- Lenco
- ILive
- Sencor
- Aiwa
- McIntosh
- Envivo
- Pioneer
Nyaste Skivspelare Manualer
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
16 Oktober 2025
11 Oktober 2025
11 Oktober 2025
11 Oktober 2025
10 Oktober 2025
10 Oktober 2025