Pyle PVTTBT6 Bruksanvisning

Pyle Skivspelare PVTTBT6

Läs gratis den bruksanvisning för Pyle PVTTBT6 (8 sidor) i kategorin Skivspelare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om Pyle PVTTBT6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

Model : PVTTBT6

Retro Belt-Drive Bluetooth Turntable with USB- -to PC Connection

TURNTABLE PARTS

1. 45 ARPM daptor

2. Lift L ever

3. Speed C S ontrol election

4. Function Selection Knob

5. Tone(Needle) arm

6. Auto & Manual Stop Control

7. Tone Arm Rest

8. Power/Volume Control Knob

9. Charging Led Indicator

10. Power Led Indicator

11. BT Led Indicator

12. Platter/Turntable

13. Stylus(Needle) Cartridge

14. Built-in Speaker

15. Power Adaptor Jack

16. USB Jack to PC for recording

17. RCA Output

18. 3.5mm Line- in Jack

POWER ON THE UNIT

Connect the power adaptor to an electrical outlet (120V-60Hz); Or make sure the rechargeable

battery has been fully d. charge Then, turn the Power/Volume Control knob clockwise to switch

on the unit. The Power led light indicator will light up.

PLAY A RECORD

1. Open the suitcase

2. Turn the function selection knob (4) to Phono mode

3. Place a record on the turntable (13) and set the player speed (3) to match the record speed

(33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large center

holes, use the 45 rpm adaptor . (1)

4. Remove the tone arm (5) from the rest position (7), push lift lever (2) backward to raise the

tone arm and gently move the tone arm to the desired position over the record. The

turntable will begin to spin, move the tone arm slowly onto the desired position on the

record to begin playing the record.

5. If the Manual & Auto Stop control ( switch 6) is in ON position, record will stop automatically

when finished. If this switch is in OFF position, record will not stop automatically when

finished.

6. For best performance and product maintenance, unplug the turntable when not in use.

PLAY BLUETOOTH

7. Turn the function selection knob (4) to BT mode. The BT light indicator will flash with

Blue/Red led light.

8. Open the BT audio source and connect with “Speaker”. Once connected, the BT light

indicator will flash only in blue color.

9. You can control the BT audio source to select songs and volume for playback.

LINE IN

10. Turn the function selection knob (4) to LINE IN mode. Connect the 3.5mm line-in jack (18)

which is located at the rear of the unit with a line in cable (not included)- . Plug the other end

of the ca into theble . audio source

11. Control the Line in audio source to select songs and volume for playback.-

Produktspecifikationer

Varumärke:	Pyle
Kategori:	Skivspelare
Modell:	PVTTBT6
Vikt:	3833 g
USB-version:	2.0
Modell:	Remdriven skivtallrik
Produktmått (B x H x D):	355.59 x 274.32 x 132.07 mm
Linjeutgångar (RCA):	2
CD-spelare:	Nej
Produktens färg:	Orange
Antal USB-portar:	1
Aux-In:	Ja
Nominella hastigheter:	33, 45, 78 RPM