Qolsys IQ4 NS Bruksanvisning
Qolsys
Larmsystem
IQ4 NS
Läs gratis den bruksanvisning för Qolsys IQ4 NS (2 sidor) i kategorin Larmsystem. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 13 recensioner. Har du en fråga om Qolsys IQ4 NS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Press
Power Button
twice within 3
seconds
2
UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit
Conforms to ANSI/UL Standards UL985, UL1023, & UL2610
Certified to ULC Sub. S545 & ULC Std. S304
Doc#: IQ4NS-QG-NA Rev Date: 2302
Qolsys, Inc. proprietary. Reproduction without written consent is not permitted.
5
WALL MOUNT
CREATE
ACCOUNT
Connect power supply
WARNING! Use 7vDC Power Supply
ONLY
Press and hold the power
button on the right side of
the panel for 3 seconds to
power up
TRY THE
MOBILE TECH
APP
SETUP WIZARD
1
2
3
4
intrusion-support@jci.com
CONTACT TECH SUPPORT
GOT QUESTIONS?
IQ4 NS QUICK GUIDE
1
1. Open the “IQ Installer Interface”, tap Start on the phone screen to begin. Tap Scan
QR Code, then position your phone and scan the QR label on the back of the panel or
the side of the box. Tap Continue.
From your smart device, download “IQ Installer” from the Apple or Google Play stores to connect to IQ4 NS
over Wi-Fi to complete local system setup. To connect, complete the following steps:
2. Press the Power Button twice within 3 seconds.
3. The Status LED will turn solid Blue. Tap Next on the screen.
4. Enter the default Installer (1111) or Dealer (2222) code to connect.
5. When prompted, change the default code to a new installer code.
6. Select Dashboard, then tap Launch Wizard.
1. With a small phillips
screwdriver, undo the
locking screw from the back
of the panel and remove the
SmartMount backplate.
1
2
1. With a small phillips
screwdriver, screw in the
locking screw from the
bottom of the panel to
secure it to the wall.
1
1
1. Mount the backplate to the
wall using flat head screws* and
appropriate wall anchors if
needed, ensuring it is level.
2. If using the model with the
legacy security radio, in the
provided hole on the right hand
side of the backplate drill a 1/4”
hole in the wall and feed the
white RF antenna into the wall.
3. A screw is required in break-
away wall tamper for UL 2610
and EN Grade 2 installations.
1
3
2
Connect the power supply to
the barrel jack on the back of
the panel.
1. Latch the top of the IQ4 NS
onto the SmartMount
backplate.
2. Swing the panel down
towards the backplate and
press firmly against the wall.
3
Produktspecifikationer
| Varumärke: | Qolsys |
| Kategori: | Larmsystem |
| Modell: | IQ4 NS |
Behöver du hjälp?
Om du behöver hjälp med Qolsys IQ4 NS ställ en fråga nedan och andra användare kommer att svara dig
Larmsystem Qolsys Manualer
22 September 2024
Larmsystem Manualer
- Abus
- DSC
- Switel
- Woonveilig
- Greisinger
- Blaupunkt
- Xavax
- Vivanco
- Techly
- Protector
- Olympia
- ETiger
- Dahua Technology
- Vimar
- ORNO
Nyaste Larmsystem Manualer
9 Oktober 2025
7 Oktober 2025
20 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025