Ring Glass Break Sensor Bruksanvisning
Ring
dörr-/fönstersensor
Glass Break Sensor
Läs gratis den bruksanvisning för Ring Glass Break Sensor (2 sidor) i kategorin dörr-/fönstersensor. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Ring Glass Break Sensor eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Home security
beyond the front door
Ring Video Doorbells and Cameras
create a Ring of Security around your
entire property.
Ring Alarm is the security system that
takes your Ring of Security a step further,
giving you another level of protection for
your property.
Now, you can arm and disarm your
system and monitor your home, all from
your phone, tablet or PC.
Contents
1. Diagram
2. In-app Setup
3. Pairing the Sensor
4. Physical Installation
5. Additional Information
Diagram
Set up your Ring Contact Sensor
near your Base Station
To add devices to your Ring Alarm, it
must be disarmed. If your Ring Alarm is
armed, please disarm it now.
In the Ring app, choose Set Up a Device
and find Ring Contact Sensor in the
Security Devices menu.
To complete the setup process, follow
the in-app instructions.
When prompted, scan the QR
Code or enter the PIN
The QR Code and PIN can be found on
the back of your device, on the box, or on
the card in this box.
12345
Contact Sensor
1.
Say hello to
your Ring
Contact Sensor.
LED
RingSensor Magnet
2.
Set up your
Ring Contact
Sensor in the
Ring app.
3.
Connect your
Ring Contact
Sensor to your
Base Station.
For Ring Alarm
Track the connection progress of
the Sensor
Your Sensor will try to connect to your
Base Station. The Sensor’s LED ring lets
you track the progress.
LED Status Patterns:
Open and close the sensor to test it
Make sure the app shows that the sensor
is open when you pull it apart.
Place your Sensor (but don’t install
it yet)
Hold the Sensor where you want to install
it. Place it near an edge of the door or
window that will move.
Align the magnet and the sensor
Place the magnet on the trim near the
sensor so that the lines on the sensor
and magnet are parallel. The magnet and
sensor can be a maximum of 1/2” apart.
Max Gap
1/2”
Alignment lines
Install your Sensor on a door or
window
Use the bracket and tape or screws
included in your kit.
How to change the battery
Press the clip and remove the sensor
cover. Replace the battery with a fresh
CR123A cell.
Pull the tab on the Contact Sensor
This connects the battery and turns on
the Sensor. Your Base Station finds it
automatically.
12345
Blue Blink (1x)
Door or
window open
Blue Blinks (3x)
Sensor
tampered
Blue Solid (5 sec)
Connected
4.
Install your Ring
Contact Sensor
on the wall.
5.
Additional
information.
© 2019 Ring LLC or its aliates.
Ring, Always Home, and all related logos are trademarks of Ring LLC or
its aliates.
Last updated: 05/13/19
Produktspecifikationer
| Varumärke: | Ring |
| Kategori: | dörr-/fönstersensor |
| Modell: | Glass Break Sensor |
Behöver du hjälp?
Om du behöver hjälp med Ring Glass Break Sensor ställ en fråga nedan och andra användare kommer att svara dig
dörr-/fönstersensor Ring Manualer
27 Juli 2025
dörr-/fönstersensor Manualer
Nyaste dörr-/fönstersensor Manualer
29 Juli 2025
10 Juli 2025