Robert Abbey S348 Bruksanvisning

Läs gratis den bruksanvisning för Robert Abbey S348 (1 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8 recensioner. Har du en fråga om Robert Abbey S348 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

S348

ASSEMBLY INSTRUCTIONS:

1. Unpack all parts and place them on a level surface.

2. Align column (G) with base (H).

3. Thread column (G) onto base (H). Pull cord taut from below base

(G) to prevent damage to the wire.

4. Thread column (F) onto column (G). Pull cord taut from below

base (H) to prevent damage to the wire.

5. Thread column (E) onto column (F). Pull cord taut from below

base (H) to prevent damage to the wire.

6. Remove nial (A) from harp (C).

7. Squeeze harp (C) inward and place into the opening of saddle

(D).

8. Place shade (B) onto harp (C).

9. Screw nial (A) onto harp (C) to secure shade to lamp.

10. Install one 150W MAX. Type A bulb into socket.

11. Insert polarized plug (H) into wall outlet.

* To clean, use a soft cloth only. Do not use any chemical or

abrasive cleaners. *

SAFETY INSTRUCTIONS:

* This lamp comes with a polarized plug as a feature to reduce the

risk of electrical shock. If the plug does not t into your outlet,

contact a licensed electrician.

* NEVER alter the plug.

* Remove plug from wall outlet before replacing light bulb.

* Do not connect the electricity until lamp is fully assembled.

ASSEMBLY INSTRUCTIONS FOR YOUR

BANDIT FLOOR LAMP

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

Produktspecifikationer