Russound IC-605 Bruksanvisning


Läs gratis den bruksanvisning för Russound IC-605 (5 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 15.5 recensioner. Har du en fråga om Russound IC-605 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
IC-605
Magnetic square grille
ICG-6S (sold separately)
Drill Pilot Hole
Mark Template
Outline
Test for
stud
clearance
Score
template
outline
Cut out
opening
Note:
Drill shallow to avoid damage to
wiring, pipes & ductwork.
For warranty information go to
www.russound.com/warranty-registration
speaker wire to the speaker location avoiding
all obstacles.
Russound offers Speaker Rough-In Brackets
bracket for speaker wire tie-off to keep the wire
from being lost during construction.
Make sure the speaker cut-out (hole) doesn't
of the mounting bracket.
for In-ceiling bracket installation.
wiring before cutting any holes in the ceiling.
for In-wall bracket installation
1. Center the cardboard template between
opening.
2. Score the outline of the template with a
utility knife to prevent chipping. If dealing
the pencil outline. Use a fine-toothed
keyhole saw or hacksaw blade with slow
strokes to saw through and remove the
inner surface.
3. Center the Speaker in the the cutout.
Rotate the frame as needed before
not overtighten.
Attach the speaker wires to the red and black
speaker terminals. Connect the Positive (+)
conductor to the Red terminal and the Negative
(-) conductor to the Black terminal. Make sure
that no stray strands of wire are touching the
other conductor or terminal.
10.15.20 | Rev 1


Produktspecifikationer

Varumärke: Russound
Kategori: högtalare
Modell: IC-605

Behöver du hjälp?

Om du behöver hjälp med Russound IC-605 ställ en fråga nedan och andra användare kommer att svara dig