Salter Aquatronic 1600 Bruksanvisning

Salter Köksvåg Aquatronic 1600

Läs gratis den bruksanvisning för Salter Aquatronic 1600 (31 sidor) i kategorin Köksvåg. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6 recensioner. Har du en fråga om Salter Aquatronic 1600 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/31
Aquatronic
TM
Rail Scale
with Clock
Instructions for use
E
BALANCE ACCROCHABLE AQUATRONIC AVEC HORLOGE INTÉGRÉE - Instructions d’emploi
„AQUATRONIC"-WAAGE MIT UHR, FÜR RELINGLEISTEN - Gebrauchsanleitung
BALANZA DE RIEL CON RELOJ AQUATRONIC - Instrucciones de uso
BILANCIA AGGANCIANBILE CON OROLOGIO - Istruzioni per l’uso
BALANÇA AQUATRONIC COM RELÓGIO PARA PENDURAR EM PRATELEIRA - Instruções de utilização
AQUATRONIC HENGEVEKT MED KLOKKE - Bruksanvisning
OPHANGBARE WEEGSCHAAL EN KLOK VAN AQUATRONIC - Gebruiksaanwijzing
AQUATRONIC-KELLOVAAKA - Käyttöohjeet
AQUATRONIC UPPHÄNGNINGSVÅG MED KLOCKA - Bruksanvisning
AQUATRONIC VÆGHÆNGT VÆGT MED UR - Brugsanvisning
0
GB
3
Ensure +/- terminals are the correct way round.
INSERT 3 AAA BATTERIES
Every time the scale is switched on it will always
initially show either metric (g) or imperial (lb/oz)
units, according to the position of the slide
switch on the underside of the scale. Set this
switch to the units you generally prefer to use.
TO PRE-SET METRIC OR IMPERIAL UNITS
AAA
AAA
AAA
This scale has a hanging hook which allows it to be hung on most standard utensil hanging rails.
Alternatively, it can be hung from its’ own hanging bracket, which can be fixed to most walls.
When the scale is placed in a hanging position, the display automatically switches to a clock.
CAUTION: DO NOT hang the scale over a direct heat source, such as a cooker hob.
If possible, site at least 1m (3ft) distant from electrical products (such as a microwave oven) that
may emit electrical interference, which could disrupt the products display. If in doubt, test the
product in position, before drilling the wall to fix the bracket.
FITTING THE HANGING BRACKET TO THE WALL
To fix the hanging bracket to a wall:
1. Observing the above caution please, choose
a position for the bracket that allows plenty
of room for the scale to hang unobstructed
and enables you to remove and replace the
scale easily.
2. With the bracket held in position against the
wall, mark the position of the round hole.
3. Select a suitable wall plug and drill a hole of
the correct size and depth to suit.
4. Fit the wall plug, and then screw the bracket to the wall, loosely. Holding the bracket horizontal,
mark the 2nd hole position. Move the bracket to one side and drill the second hole.
5. Fit the wall plug and then screw the bracket firmly to the wall, ensuring it remains level.
NOTE: The wall plugs supplied with this product are suitable for on solid walls and require a 5mm
diameter hole. For hollow or other wall types use a suitable alternative fixing.
GB
5
GB
4
8. To confirm the minute setting:
Press SET.
9. Now the symbol for 12 hour clock will flash.
10. To change to 24 hour clock: Use the UP or
DOWN on screen button.
11. To confirm the setting:
Press SET.
H
USING THE SCALE
TO SWITCH TO SCALE MODE
If the scale is hanging:
Moving the scale to a horizontal position will
prompt the display to automatically switch to
scale mode.
If the scale is already horizontal, but in
clock mode:
Press the scale button.8888 will appear on
the display.Wait until the display shows zero
before weighing. (see diagram)
To use this scale with a bowl you can either
place the bowl on the platform before switching
to scale mode, or (if already in scale mode)
place the bowl on the platform then press the
zero button and wait for a zero display.
scale
TO SET THE CLOCK
1. To set the clock, place the scale on a
flat surface.
If it is not already showing a clock display,
press the
clock button on the display screen.
2. To enter the clock setting mode, press and
hold the SET button on the display screen
2 seconds.
3. The hour digits will flash.
4. Use the UP and DOWN buttons on the
screen to set the correct hour.
5. To confirm the hour setting:
Press SET.
6. Now the minute digits will flash.
7. Use the UP and DOWN buttons on the
screen to set the correct minutes.

Produktspecifikationer

Varumärke: Salter
Kategori: Köksvåg
Modell: Aquatronic 1600

Behöver du hjälp?

Om du behöver hjälp med Salter Aquatronic 1600 ställ en fråga nedan och andra användare kommer att svara dig