Salus MP100A Bruksanvisning

Salus Inte kategoriserad MP100A

Läs gratis den bruksanvisning för Salus MP100A (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 4 recensioner. Har du en fråga om Salus MP100A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

Energy Saving A Rated Circulating Pump

Models: MP100A, MP200A & MP280A

O P E R AT I O N M A N UAL

Product compliance & safety information

These instructions are applicable to the SALUS Controls model stated on the front cover of this

manual only, and must not be used with any other make or model.

This accessory must be tted by a Competent person, and installation must comply with the guidance

provided in the current IEE Wiring Regulations and any relevant Building Regulations. Failure to

comply with the requirements of these publications could lead to prosecution.

Please leave these instructions with the end user where they should be kept in a safe

place for future reference.

Always isolate the AC Mains supply before installing or working

on any components that require 230 VAC 50Hz supply.

02 Energy Saving A Rated Circulating Pump

04 Energy Saving A Rated Circulating Pump

Notes

01. Read the installation manual carefully before installation and use.

02. SALUS will not be liable for any personal injury, pump damage and other property damage due to

failure to comply with contents specied in safety warning signs.

03. The installers and operators must comply with all relevant local safety regulations.

04. The user must conrm that only qualied personnel with professional certication and prociency of this

manual is allowed to install and maintain this product.

05. The pump must not be installed in a place that is damp or may be splashed by water.

06. For convenient access of maintaince, a shut-o valve shall be installed on each side of the pump.

07. The power supply of the pump shall be cut o before installation and maintainace.

08. For domestic hot water, copper or stainless steel pump body shall be used.

09. Heat supply pipelines shall not be frequently lled with non-softened water so as to avoid increasing calcium

in the circulating water inside the pipeline, which may thus block the impeller.

10. Do not start the pump without liquid.

11. Not suitable for drinking water.

12. The liquid may be high temperature and high-pressure; therefore, the liquid in the system must be

completely drained or the shut-o valves on both sides, closed before moving and dismantling the

pump to prevent burning.

13. If removing the vent plug, high temperature and high-pressure liquid will be overew. Therefore,

it is necessary to guarantee that the outow liquid will not cause personal injury or damage other parts.

14. Ventilation must be ensured in summer or high ambient temperature period to avoid condensation

that may cause electrical malfunctions.

15. In winter, the pump system does not work or when the ambient temperature drops below 0 , ℃

liquid in the system shall be completely drained so as to avoid frost cracking of pump body.

16. If the pump is left unused for a long time, please close the pipe valve in the inlet and outlet of

the pump and cut o the power supply.

Produktspecifikationer

Varumärke:	Salus
Kategori:	Inte kategoriserad
Modell:	MP100A
Färg på produkten:	Zwart
Vikt:	540 g
Djup:	99.5 mm
Diameter:	75 mm
Brännvidd:	28 - 300 mm
Bildstabilisator:	Ja
Längd:	99.5 mm
Kompatibilitet:	Sony
Närmaste fokusavstånd:	0.49 m
Maximalt antal bländare:	40
Minsta bländartal:	3.5
Filterstorlek:	67 mm
Komponent för:	SLR
Betraktningsvinkellins, diagonal:	75.4 - 8.25 °
Antal bländarblad:	7