Salus SQ610BRF Bruksanvisning
Läs gratis den bruksanvisning för Salus SQ610BRF (52 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 8.5 recensioner. Har du en fråga om Salus SQ610BRF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/52
2
Introduction
The SQ610BRF Quantum is a ZigBee temperature controller for wireless control of iT600 series devices, such
as the KL08RF wiring centre, mini TRV head, RX10RF boiler control module.
In order to control SQ610BRF over the Internet or via the SALUS Smart Home mobile app (ONLINE mode),
it must be installed together with the UGE600 Internet gateway (sold separately). From the application level,
it is possible to pair SQ610BRF with other system elements, e.g. Smart Plug SPE600, Smart Relay SR600 or
window/door sensor OS600/SW600.
SQ610BRF can be used locally without an Internet connection , however, it’s communication(OFFLINE mode)
with other devices must be done using the CO10RF coordinator (sold separately).
Full manual in PDF format is available at www.salus-controls.eu site.
Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for
indoor use only. Installation must be carried out by a qualied person in accordance to national and EU regulations.
Disconnect your equipment before cleaning it with a dry cloth.
Product Compliance
Safety Information
This product complies with the essential requirements and other relevant provisions of Directives 2014/30/ EU,
2014/35/EU, 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the
following internet address: www.saluslegal.com.
Package Content:
1) SQ610BRF Quantum Thermostat
2) Wall mounting plate
3) Self-adhesive mounting tape
4) Mounting screws
5) Manual instruction
3
EnglishNederlands DeutschFrançais
Before you start:
Charging to full battery level may take up to
24h maximum.
New SQ610BRF Quantum Thermostat is partially
charged, however, we recommend you to fully
charge the battery before use.
Connect charger to micro-USB Port which is at
the bottom of SQ610BRF Quantum Thermostat to
charge the device.
Wiring diagram (S1, S2 Input)
Symbols explanation:
S – volt-free contact
T – temperature sensor
S1,S2 Terminals:
- air or oor temperature sensor
- external volt-free contact to connect any
ON/OFF switch or occupancy sensor (Hotel card)
Mounting: to mount thermostat you can use
included accesories (mounting screws or
self-adhesive tape). Remove back cover
to mount the plate to the wall. After this just
attach thermostat to the plate (it has built-in
magnet).
Please note:
The ideal position to thermostat mounting is about
1,5m from oor level far from heating or cooling
sources. Thermostat can’t be exposed to sunlight
or any extreme conditions like for example draft.
1 2
3
S1
S2
T
S
Produktspecifikationer
| Varumärke: | Salus |
| Kategori: | Termostat |
| Modell: | SQ610BRF |
Behöver du hjälp?
Om du behöver hjälp med Salus SQ610BRF ställ en fråga nedan och andra användare kommer att svara dig
Termostat Salus Manualer
31 Mars 2025
31 Mars 2025
26 Januari 2025
26 Januari 2025
26 Januari 2025
26 Januari 2025
26 Januari 2025
10 Januari 2025
7 Januari 2025
6 Oktober 2024
Termostat Manualer
- Extraflame
- ACV
- Avidsen
- ChiliTec
- King
- Konyks
- Hive
- Watts
- Perel
- Carel
- Delta Dore
- De Dietrich
- Airwell
- EMOS
- Techno Line
Nyaste Termostat Manualer
17 Juni 2025
14 Juni 2025
9 April 2025
7 April 2025
7 April 2025
6 April 2025
6 April 2025
6 April 2025
5 April 2025