Scosche SAVW-6 Bruksanvisning
Sidor 1 Engelska Inte kategoriserad
Läs bruksanvisningen för Scosche SAVW-6 gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 17 gånger. Fråga om modellen? Ställ en fråga
1.Use the adaptor bracket (with slotlocated at the top) as a template to mark and drill
mounting holes securing speaker to adaptor bracket as shown here. before
2.Place supplied speed clips over mounting holes with the flat sides out.
3.Connect speaker wires to new speaker. Feed wires through slotin top of bracket.
Secure speaker to bracket using hardware supplied and connect wires to
vehicle speaker wires.
Note: See wiring instructions in the Crutchfield for your particular vehicle.MasterSheet
Speaker Adaptor Bracket
142 SAVW6
Parts
Supplied:
4
(2) Brackets(8) Phillips
Screws
Revision 02/05/14
*142SAVW6*
(8) Speed
Clips
Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
CAUTION:
!
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
(8) Nuts(8) Washers
(8) Cinch
Screws
Slot
(for wires)
Drill new mounting holes
and place speed clips
over holes.
Tools Required
Phillips
Screwdriver
Drill &
1/8” Bit
1/4" Wrench
4
Produktspecifikationer
| Varumärke: | Scosche |
| Kategori: | Inte kategoriserad |
| Modell: | SAVW-6 |
Behöver du hjälp?
Om du behöver hjälp med Scosche SAVW-6 ställ en fråga nedan och andra användare kommer att svara dig