Sekonic L-508 Bruksanvisning

Läs gratis den bruksanvisning för Sekonic L-508 (2 sidor) i kategorin Ljusmätare. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 6 recensioner. Har du en fråga om Sekonic L-508 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick Guide to the Sekonic L-508

SPOT/INCIDENT

SELECTOR

SWITCH

MEASURE

1*-4* ZOOM

SPOT RING

RETRACTABLE

LUMISPHERE

ON/OFF

SET/CHANGE

DIAL

ZOOM SPOT

EYEPIECE

MEMORY

CLEAR

(see instructions)

MEMORY

(see instructions)

AVERAGE/EV

BRIGHTNESS

DIFFERENCE

(see instructions)

BOOSTER

OUTLET

(for optional

accessories)

FLASH CORD

SOCKET

(when cord is attached

push measure to trigger

flash and measure light)

ISO/ISO 2

(depress while turning

set/change dial to set)

MODE

DEPRESS WHILE

TURNING SET/CHANGE

DIAL FOR:

DAYLIGHT MODE

FLASH W/CORD

AUTO RESET CORDLESS FLASH

1/4” TRIPOD

SOCKET

- - - - -- - - - - ->

1/2 Step Shutter Speeds

Remove battery compartment cover and set DIP Switch 1

(TIME 0.5) to “ON.” Select shutter speed using Set / Change

Dial.

Aperture Priority

Set DIP switch 2 (F. NO.) to “ON”. Select and use Set/

Change Dial to select aperture.

EV Readout

Set DIP switch 3 (EV) to “ON”. Select Ambient mode.

Hold Mode button and turn Set/Change Dial until EV readout

shows. Depress measure button.

Multi Flash Mode

Set DIP switch 4 (MULTI) to “ON” . Select Cord or

Cordless Flash mode. Hold down Mode button and turn

Set/Change Dial until MLT (Multi) shows on display. Measures

and counts up to 9 cumulative flashes.

Exposure Compensation

Depress both ISO and ISO 2 at the same time and turn Set/

Change dial to compensation desired up to +/- 9.9 EV.

Motion Picture

Turn Set/change dial (shutter speed) past 8000 to show f/s

(frames per second). Select desired f/s and depress measure

button. Use EV readout to convert EV to Lux or FC with

reference charts.

PRINTED IN USA

Advanced Features

Produktspecifikationer