Seville Classics Mesh Utility Shoe Rack 3 Tier Bruksanvisning

Seville Classics Inte kategoriserad Mesh Utility Shoe Rack 3 Tier

Läs gratis den bruksanvisning för Seville Classics Mesh Utility Shoe Rack 3 Tier (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13.5 recensioner. Har du en fråga om Seville Classics Mesh Utility Shoe Rack 3 Tier eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
STEPS TO STACK THE RACK
1. Build another rack following the instructions above.
However, do not install the LEVELING FEET (B) on the second
(top) unit.
______________________________________________________
2. Screw the STACKING PINS (G) into the legs of the top unit.
Remove all CAPS (C) from the original (base) unit.
______________________________________________________
3. Lift the top unit up and onto the base unit, lining up the pins
with the holes at the four top corners so that they can be
inserted into each other. Be sure everything is in alignment and
then press down firmly on the top unit so that it sits tightly into
and onto the base unit.
WEIGHT CAPACITY PER SHELF: 13.6 kg/ 30 lb
ASSEMBLY INSTRUCTIONS
3-TIER ADJUSTABLE SHOE RACK (Model No. 15890)
www.sevilleclassics.com
©2015 Seville Classics, Inc.
NOTE: Drawing shows 2 units
stacked vertically. Do not exceed
maximum height of 2 stacked units.
WARNING: Do not sit on the rack. Do
not drop heavy items on the rack.
Place heavier items on the lower
shelves and lighter ones on the top
shelves. Do not move the rack while
loaded.
G
TF150617


Produktspecifikationer

Varumärke: Seville Classics
Kategori: Inte kategoriserad
Modell: Mesh Utility Shoe Rack 3 Tier

Behöver du hjälp?

Om du behöver hjälp med Seville Classics Mesh Utility Shoe Rack 3 Tier ställ en fråga nedan och andra användare kommer att svara dig