Seville Classics SHE15896 Bruksanvisning
Seville Classics
Inte kategoriserad
SHE15896
Läs gratis den bruksanvisning för Seville Classics SHE15896 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10.5 recensioner. Har du en fråga om Seville Classics SHE15896 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
#15896
2-TIER UTILITY SHOE/STORAGE RACK
ASSEMBLY INSTRUCTIONS
CUSTOMER SERVICE
Tel 1.310.533.3800
Tel 1.800.323.5565
Fax 1.310.533.3899
Email: support@sevilleclassics.com
Monday through Friday
8:30 am - 4:30 pm (Pacic Time)
Please Read and Save These Instructions
US & International Patents Pending ©2014 Seville Classics, Inc.
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
A B C D E
Side Frame (x2) Leveling Foot (x4) Cap (x4)
(Pre-installed)
Shelf (x2) Stacking Pin (x4)
STEPS TO ASSEMBLE THE RACK
1. Unpack and remove all parts from the box.
If there are missing or broken parts, please
contact our CUSTOMER SERVICE.
2. Screw the LEVELING FEET (B) into the legs of
each SIDE FRAME (A).
3. Insert the hooks on both sides of the SHELF
(D) into the lower brackets of the side frames.
4. Repeat step 3 for the second shelf.
5. Once all shelves are securely in place, adjust
the leveling feet by screwing them in or out to
obtain a level rack.
WARNING: Do not sit on the rack. Do not drop heavy items on
the rack. Place heavier items on the lower shelves and lighter
ones on the top shelves. Do not move the rack while loaded. Do
not move the rack by lifting the shelf, use the tops of the side
frames instead.
WEIGHT CAPACITY: 25 lb per shelf
CUSTOMER SERVICE
Tel 1.310.533.3800
Monday through Friday
8:30am - 4:30pm (P Time)
www.sevilleclassics.com
Made in China SL141022
STEPS TO
1. Build another rack following the
instructions on the left. However, do not
install the LEVELING FEET (B) on the second
(top) unit.
2. Screw the STACKING PINS (E) into the legs of
the top unit. Remove all CAPS (C) from the
original (bottom) unit.
3. Lift the top unit up, lining up the pins with
the holes at the four top corners so that the
pins can be inserted into them. Be sure
everything is in alignment and then press the
top unit do o
the bottom unit.
STACK THE RACK
NOTE: Drawing shows 2 units
stacked vertically. Do not exceed
maximum height of 2 stacked units.
Produktspecifikationer
| Varumärke: | Seville Classics |
| Kategori: | Inte kategoriserad |
| Modell: | SHE15896 |
Behöver du hjälp?
Om du behöver hjälp med Seville Classics SHE15896 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Seville Classics Manualer
19 September 2024
19 September 2024
19 September 2024
19 September 2024
Seville Classics Mesh Utility Shoe Rack 3 Tier Bruksanvisning
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
Inte kategoriserad Manualer
- Smith-Victor
- Husqvarna
- SoundLAB
- Asaklitt
- Innr
- Hansgrohe
- Ulsonix
- Edilkamin
- Swissvoice
- Foscam
- Austrian Audio
- Honeywell
- AmerBox
- Yamato
- Yealink
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025