Shadow SH965 NFX Bruksanvisning

Läs gratis den bruksanvisning för Shadow SH965 NFX (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 3 recensioner. Har du en fråga om Shadow SH965 NFX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Installation Instruction for SH 965 NFX

Professional Upright Bass Pickup System

Content:Content:

Pickups with shielded cable and 2.3mm plug

Control unit with holder and 6.3mm output jack

3-Volt battery

Fig. 1Fig. 1

1.Loosen strings, so that the bridge can be raised a few millimeters easily.

2.Lift bridge up. Place pickup between bridge feet and body so that the cable points toward the tailpiece

of the instrument (one pickup per bridge foot).

3.The pickups has to be centered under the feet to guarantee optimized sound transfer. Take care, that

there is no unevenness/roughness (dirt, dust, concavities on top of instrument or bottom of bridge).

4.Tune your instrument.

5.Install control unit between the bridge and the tailpiece. Screw the underside nut of the control unit

off and clamp the center two strings between control unit and plate. Screw nut back on the control

unit.

6. Place supplied 3V battery into control unit. Note correct polarization.

7. Plug pickup-cables into the 2.5mm input jacks of the control unit. Either pickup can plug into either

pickup jack.

8. Connect to appropriate amplier with instrument cable.

Pickup

Pickup cables

Fax: (561) 743 0460

eMail: USA@shadow-electronics.com

Shadow Electronics of America Inc.

17791 Alexander Run

Jupiter, FL 33478 U.S.A.

Shadow Elektroakustik

Peter-Haendel Straße 2

91334 Hemhofen · Germany

Fax: +49 - 91 95 - 92 99 30

eMail: info@shadow-electronics.com

For more information please check: http://www.shadow-electronics.com

09-2005

Produktspecifikationer