Showtec Performer Profile 700 Q6 Bruksanvisning

Showtec Lättnad Performer Profile 700 Q6

Läs gratis den bruksanvisning för Showtec Performer Profile 700 Q6 (56 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8.5 recensioner. Har du en fråga om Showtec Performer Profile 700 Q6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/56

P erformer Profile 700 Q6

Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands – – – –

Product code: 33067

USER MANUAL

ENGLISH

Performer Profile 700 Q6

Product code: 33067

Preface

Thank you for purchasing this Showtec product.

The purpose of this user manual is to provide instructions for the correct and safe use of this product.

Keep the user manual for future reference as it is an integral part of the product. The user manual shall be

stored at an easily accessible location.

This user manual contains information concerning:

● Safety instructions

● Installation and operation of the device

● Intended and non-intended use of the device

● Maintenance procedures

● Troubleshooting

● Transport, storage and disposal of the device

Non-observance of the instructions in this user manual may result in serious injuries and damage of

property.

No part of this document may be copied, published or otherwise reproduced without the prior written

consent of Highlite International.

Design and product specifications are subject to change without prior notice.

For the latest version of this document or other language versions, please visit our website

www.highlite.com service@highlite.com or contact us at .

Highlite International and its authorized service providers are not liable for any injury, damage, direct or

indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or

reliance on the information contained in this document.

Performer Profile 700 Q6

Product code: 33067

Table of contents

1. Introduction .......................................................................................................................................................... 4

Before Using the Product .................................................................................................................................. 4

Intended Use ....................................................................................................................................................... 4

Product Lifespan ................................................................................................................................................. 4

LEDs Lifespan ....................................................................................................................................................... 4

Text Conventions ................................................................................................................................................ 4

Symbols and Signal Words ................................................................................................................................ 5

Symbols on the Information Label .................................................................................................................. 5

2. Safety .................................................................................................................................................................... 6

Warnings and Safety Instructions .................................................................................................................... 6

Requirements for the User ................................................................................................................................. 8

3. Description of the Device ................................................................................................................................... 9

Front View ............................................................................................................................................................ 9

Back View ............................................................................................................................................................ 9

Product Specifications ....................................................................................................................................10

Optional Accessories .......................................................................................................................................11

Dimensions .........................................................................................................................................................11

4. Installation .......................................................................................................................................................... 12

Safety Instructions for Installation ..................................................................................................................12

Installation Site Requirements ........................................................................................................................12

Rigging ...............................................................................................................................................................13

Angle Adjustment ............................................................................................................................................14

Connecting to Power Supply .........................................................................................................................15

Power Linking of Multiple Devices .................................................................................................................15

5. Setup ................................................................................................................................................................... 16

Warnings and Precautions .............................................................................................................................16

Stand-alone Setup ...........................................................................................................................................16

DMX Connection ..............................................................................................................................................16

DMX-512 Protocol ...................................................................................................................................16

DMX Cables .............................................................................................................................................17

Master/Slave Setup ................................................................................................................................18

DMX Linking .............................................................................................................................................19

DMX Addressing ......................................................................................................................................19

Beam Shaping with Shutters ...........................................................................................................................20

Gobo Installation ..............................................................................................................................................21

Iris Installation.....................................................................................................................................................22

Lens Installation .................................................................................................................................................23

Fixed-angle Lens Installation ................................................................................................................23

Zoom Lens Installation............................................................................................................................24

6. Operation ........................................................................................................................................................... 25

Safety Instructions for Operation ...................................................................................................................25

Control Modes ..................................................................................................................................................25

Control Panel ....................................................................................................................................................26

Start- up...............................................................................................................................................................26

Menu Overview ................................................................................................................................................27

Main Menu Options .........................................................................................................................................31

Static Colors .............................................................................................................................................31

DMX Address ...........................................................................................................................................32

Run Mode ................................................................................................................................................32

Personality ................................................................................................................................................32

Auto Programs ........................................................................................................................................33

Edit .............................................................................................................................................................34

Setting .......................................................................................................................................................36