Shure SE310 Bruksanvisning

Shure Hörlurar SE310

Läs gratis den bruksanvisning för Shure SE310 (2 sidor) i kategorin Hörlurar. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Shure SE310 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

SE310

Sound Isolating™ Earphones

Featuring sound isolating

design and Tuned BassPort

enhanced Hi-Definition

MicroSpeakers, the Shure

SE310 delivers extended

range audio and enhanced

bass. An ideal personal

listening device upgrade, the

stylish Shure SE310 includes

a carrying case, modular

cable, interchangeable

Sound Isolating™ sleeves

and adapters—providing

a comfortable,

personalized fit and

maximum portability

27EN3244 (Rev. 2)

Printed in U.S.A.

INSERTING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass), check

the tightness of the seal between the earphone and your ear, or try one of the

other sleeve options.

To replace sleeve, carefully remove old one and slide new sleeve over nozzle barb. If any

part of the nozzle is exposed, sleeve is not properly installed. Replace sleeves if they do

not grip the nozzle tightly

WEARING THE EARPHONES

Three suggested methods for wearing the earphones are illustrated below.

Tighten the cable and take up slack by raising the cable sleeve.

Over the ear

in back

Over the ear

in front

Straight down

in front

Cable

Sleeve

Nozzle Barb

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you

choose is easy to insert into your ear, fits comfortably, and is easy to remove

from your ear.

Soft Foam Sleeves

When using the foam sleeves, compress the sleeve between your

fingers before inserting it into the ear canal. Hold the earphone in

place for about ten seconds while the foam expands and creates

a tight seal.

Triple-Flange Sleeves

If desired, the sleeve stem may be shortened. Use sharp scissors

to carefully trim the stem to the desired length.

Soft Flex Sleeves

In small, medium, and large sizes.

Made from pliable rubber.

Note: carefully slide sleeve over earphone nozzle barb for a secure grip.

REMOVING THE EARPHONES

Grasp the body of the earphone and gently twist to remove.

CLEANING THE EARPHONE NOZZLE

If you notice a change in sound quality, remove the sleeve and check

the nozzle of your earphone. If nozzle is blocked, clear obstruction

by using wire loop end of cleaning tool.

Nozzle

Wire Loop

When cleaning, do not force any object through the earphone nozzle!

This will damage the earphone sound filter.

Note: Do not pull on cable to remove the earphone.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Sleeve

Sleeve Over Barb

Cleaning

Tool

Produktspecifikationer

Varumärke:	Shure
Kategori:	Hörlurar
Modell:	SE310
Produkttyp:	Hörlurar
Impedans:	28 Ω
Kabellängd:	1.36 m
Produktens färg:	Vit
Anslutningsteknologi:	Kabel
Typ av örondel:	Intraaural
Hörlurarnas frekvens:	22 - 19000 hz
Hörlurarkänslighet:	111 dB