Smeg SRV532GH3 Bruksanvisning

Smeg Ugn SRV532GH3

Läs nedan 📖 manual på svenska för Smeg SRV532GH3 (5 sidor) i kategorin Ugn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
ISTRUZIONE PER L’UNIONE DEI
PIANI DI COTTURA
INSTRUCTION FOR COMBINING
HOBS
INSTRUCCIONES PARA LA UNIÓN
DE LAS ENCIMERAS
INSTRUCTIONS POUR L’UNION
DES TABLES DE CUISSON
ANWEISUNGEN FÜR DIE
VERBINDUNG DER KOCHMULDEN
INSTRUCTIES VOOR HET
SAMENVOEGEN VAN DE
KOOKPLATEN
UNIONE PIANI COTTURA
COMBINING HOBS
Prima di eseguire il, montaggio dei piani
GAS, PIASTRE ELETTRICHE e PIANO
DI APPOGGIO, praticare nel piano top
un'apertura per l'incasso delle
dimensioni indicate in figura 1.
Nel caso di piani VETROCERAMICA,
FRIGGITRICE e BARBECUE o in
abbinamento con i piani sopra indicati
attenersi alle dimensioni indicate in
figura 2.
Il montaggio del corredo di unione deve
essere eseguito come segue (vedi fig.
3):
1. Mettere i piani di cottura uno
accanto all'altro, rovesciati;
2. Applicare sul listello di unione A
un leggero strato di silicone
trasparente in entrambi i lati interni
X su tutta la sua lunghezza e
inserirlo fra i piani di cottura;
3. Allineare e comprimere i piani al
listello;
4. Inserire i piani assemblati nel foro
praticato sul piano top, verificando
la perfetta unione del listello ai piani
(Fig.3);
5. Chiudere le alette di fissaggio B
aiutandosi con una pinza, in modo
che i lembi delle alette stringano i
lati dei piani;
6. Inserire i piani assemblati nel foro
praticato sul piano top, verificando
la perfetta unione del listello ai
piani;
7.
Togliere i piani di cottura dal foro ed
eseguire il fissaggio con la
guarnizione (vedere le istruzioni del
piano di cottura).
Before installing GAS hobs,
ELECTRIC PLATES and the COVER
TOP, make a hole in the top surface to
allow installation as shown in figure 1.
In case of CERAMIC, DEEP-FRYER
and BARBECUE hobs, installed on their
own or in combination with the fixtures
listed above, see figure 2 for hole
dimensions.
To install the combination kit, proceed
as follows (see fig. 4):
1. Place the hobs side by side, upside
down;
2. Apply a thin layer of transparent
silicone along the whole length of
both the inside edges X of the
joining strip A, and place it between
the hobs;
3. Align the hobs with the joining strip
and press them against it;;
4. Fit the assembled hobs into the hole
made in the top, checking that the
joining strip is perfectly snug against
the hobs (Fig. 3);
5. Close the fixing tabs “B” with the aid
of a pair of pliers, so that the edges
of the tabs grip the sides of the hobs
firmly;
6. Fit the assembled hobs into the hole
made in the top, checking that the
joining strip is perfectly snug against
the hobs;
7. Remove the hobs from the hole and
fix using the seal (see hob
instructions).

Produktspecifikationer

Varumärke: Smeg
Kategori: Ugn
Modell: SRV532GH3

Behöver du hjälp?

Om du behöver hjälp med Smeg SRV532GH3 ställ en fråga nedan och andra användare kommer att svara dig




Ugn Smeg Manualer

Ugn Manualer

Nyaste Ugn Manualer