SolidDrive SD-1 Bruksanvisning


Läs gratis den bruksanvisning för SolidDrive SD-1 (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 15 recensioner. Har du en fråga om SolidDrive SD-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
SD-1DESKTOP-250-PAIR
Install Instructions For:
SD-1DESKTOP-250-PAIR
GETTING STARTED WITH SOLIDDRIVE SETUP
Included with the SolidDrive SD1 Desktop Kit-250 for
installation on any horizontal surface:
Two (2) SolidDrive SD-1 Desktop transducers, SD-250 mini
amplier with built-in EQ curves, 15V DC power supply, all
necessary cabling, instructions and durable, padded case.
SD-250 amp from the supplied push-on connector to the
left and right speaker outputs on SD-250. The special silicone
rubber pad “grips” any non-porous surface.
The portable SolidDrive SD1 Desktop Kit-250 is to be used
with a laptop computer, portable CD player, or other sound
source. The SolidDrive SD1 Desktop utilizes patented
technology to convey an audio signal into a table or counter
top, evenly delivering sound from the entire surface.
1. Connect the power supply to the SD-250 amplier.
2. Plug the power lead from the 15V DC power supply into the DC
IN of the amplier. Connect the SolidDrive with “push-on” connector
to the speaker output of the SD-250. For use with two transducers,
jumper setting should be set to “STEREO”.
3. Connect audio source (MP3 player, computer, etc.) to stereo mini
input. Make sure INPUT SELECTOR is set to STEREO MINI.
4. If outside the USA, use appropriate outlet adapter and plug into
wall outlet.
5. Adjust volume on computer or other audio source to desired level.
The audio output signal level will vary from computer to computer,
You can use the volume control on the SD-250.
6. Adjust the proper electronic EQ on the SD-250 [WOOD, DRYWALL
(gypsum), GLASS, or FLAT] for the surface type the SolidDrive will be
used on.
Warning Avis
SolidDrive products must be installed by a professional audio installer/contractor. For safety
and for optimum audio performance, installer must follow all directions issued by SolidDrive.
Les produits SolidDrive doit être installé par un installateur professionnel audio/contractuer.
Pour plus de sûreté et pour des performances audio optimales, l’installateur doit suivre toutes
les instructions émises par SolidDrive.
© 2025 SoundTube. All rights reserved. PN INS-SD-250 Rev07.16.25


Produktspecifikationer

Varumärke: SolidDrive
Kategori: ej kategoriserat
Modell: SD-1

Behöver du hjälp?

Om du behöver hjälp med SolidDrive SD-1 ställ en fråga nedan och andra användare kommer att svara dig