Sonic Alert TR75VR Bruksanvisning

Sonic Alert Säkerhet TR75VR

Läs gratis den bruksanvisning för Sonic Alert TR75VR (1 sidor) i kategorin Säkerhet. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7.5 recensioner. Har du en fråga om Sonic Alert TR75VR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

SONIC RING ELITE TELEPHONE / VIDEO

PHONE SIGNALER

MODEL TR75VR

SONIC ALERT’S LIMITED WARRANTY

The Telephone Ring Signaler Model TR75VR is warranted against

manufacturing defects in materials and workmanship for five (5) years

from the date of purchase. Within this period Sonic Alert will repair or

replace at our option the TR75VR without charge for parts and labor.

Simply send the TR75VR (postpaid) and a copy of your sales slip as

proof of purchase to: Sonic Alert Inc., Attn: Repairs 1050 E. Maple

Road, Troy MI 48083

FCC INFORMATION

We designed your telephone signaler to conform to federal regulations,

and you can connect it to most phone lines. However, each TR75VR

(and other device, such as a phone or answering machine) you connect

to the phone line draws power. We refer to this power draw as the

ringer equivalence number, or REN. The REN is on the TR75VR

rating label.

If you use more than one phone or other device on the phone lines, add

up all the REN’s. If the total is more than five, Phones might not ring.

In rural areas, a total of three might impair ringer operation. If ringer

operation is impaired, disconnect a device from the line.

Your TR75VR complies with Part 68 of FCC Rules. You must, upon

request, provide the FCC registration number and the REN to your

local phone company. Both numbers are shown on the TR75VR’s

rating label.

In the unlikely event that your TR75VR causes problems on the phone

line, the phone company can temporarily discontinue service. If this

happens, the phone company notifies you of these changes in advance.

If advance notice is not practical, the phone company notifies you as

soon as possible and advises you of your right to file a complaint with

the FCC.

Also, the phone company can make changes to its lines, equipment, or

procedures that could affect the operation of this device. The phone

company notifies you of these changes in advance, so you can take the

necessary steps to prevent interruption of your phone service.

Modifying or tampering with your TR75VR’s internal components can

cause a malfunction and invalidate the TR75VR’s warranty and void

your FCC authorization to operation it. If the TR75 is not operating as

it should, return it to Sonic Alert. If the problem is harming the phone

lines, the phone company might ask that you disconnect the TR75VR

until the problem is resolved.

OPERATION

The model TR75VR telephone / video phone signaler alerts you

that your TTY, telephone, fax or videophone is ringing by

flashing a lamp on and off automatically. The TR75VR can

flash lights in other rooms by use of remote receivers, (Models

SA101, SA201, RH100, BL300, and Sonic Boom Alarm Clock)

INSTALLATION

1. Plug the end of the TR75VR phone cord into the telephone

input jack at rear of videophone (see videophone directions

for telephone flasher unit). For telephone signaling plug the

modular phone plug into standard modular phone jack (use

jack type USOC RJIIC). The fifteen-foot cord is long enough

to accommodate a variety of phone locations.

2. To set ringer flash pattern, move the three position switch on

the side of the TR75VR marker 123 to desired flash pattern.

If using an additional Sonic Alert phone signaler for your

regular phone or TTY, this feature will allow you to select a

unique flash pattern different from your other phone signaler.

3. Plug a lamp into the pluglet on the TR75VR. Make sure the

switch on the lamp is in the “ON” position or the lamp

will not flash when the telephone rings. The switch light

will go on each time the lamp flashes. If the switch light

comes on and the lamp is not flashing, make sure the lamp is

in the on position and the bulb is not burned out.

4. Plug the TR75VR into any standard electrical outlet. Do not

use power strips or surge protectors these devices will

reduce the strength of the signal being sent to remote

receivers. If other receivers do not receive the signal from

the TR75VR plug the TR75VR into an outlet by itself,

other electrical appliances like TV’s etc. can weaken the

signal sent from the TR75VR if plugged into the same

outlet.

5. To use Remote Receivers (Model SA101, SA201, RH100.

BL300 or SB1000) simply plug receiver into an electrical

outlet and plug a lamp into the outlet located on the receiver.

Models SA101, SA201, RH100, BL300 and the Sonic Boom

Alarm Clock can be used.

6. Use with a video phone, plug in TR75VR into 110 volt

outlet. Plug phone line into back of video phone at telephone

input

The TR75VR and Remote Receivers are designed for incandescent

light bulbs up to 300 watts. Never use the TR75 with a fluorescent

light or any type of appliance.

Diagram TR75VR

MADE IN CHINA

1050 East Maple Rd, Troy MI 48083 (248)577-5400

www.SonicAlert.com

Produktspecifikationer

Varumärke:	Sonic Alert
Kategori:	Säkerhet
Modell:	TR75VR
Färg på produkten:	Zwart
Husmaterial:	Metaal
Monteringsmetod:	Plafond
Maximal viktkapacitet:	90.7 kg
Tiltvinkelområde:	-25 - 5 °