SPL DeEsser Mk2 Bruksanvisning
Läs gratis den bruksanvisning för SPL DeEsser Mk2 (9 sidor) i kategorin Processor. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 13.5 recensioner. Har du en fråga om SPL DeEsser Mk2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/9
DeEsser Mk2
Auto Dynamic DeEsser
Manual
Further information: spl.audio
EN
DE
DeEsser Mk2 DeEsser Mk2
2 3
Getting started
Read the safety instructions starting on page 7.
Make sure that the mains voltage of the DeEsser Mk2 mentioned in the specications
(page 14) corresponds to the voltage of your region.
The power switch on the back of the DeEsser Mk2 must be in the o position.
(O = O / On = I).
Connect the supplied power cord to the power connector of the DeEsser Mk2 and to a
power outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
The devices that are to be connected to the DeEsser Mk2 must be be switched o.
Connect your devices to the inputs and outputs of the DeEsser Mk2 using appropriate
audio cables (XLR, TRS).
Audio cables not included in the scope of delivery.
Power on
Switch on the power switch on the rear panel of the DeEsser Mk2 (On = I).
The PWR LED and all activated switches light up.
Power o
Switch o the power switch on the rear panel of the DeEsser Mk2 (O = O).
The PWR LED and all activated switches will no longer light up.
Mains input
Power switch
PWR LED
Fuse
OutputVoltage selector
Input
EN
DE
DeEsser Mk2 DeEsser Mk2
4 5
S-Reduction
The S-Reduction control adjusts the intensity of the S-sound reduction.
In practice, S-Reduction settings between -2 dB and -8 dB achieve the
best results for most applications.
LED display
The S-Reduction LED display visualizes the intensity of the S-sound
reduction between 0 dB and -20 dB in 2 dB steps.
Auto
The Auto switch activates the Auto Dynamic function. This automatically
adjusts the threshold if the input level fluctuates due to varying distance
to the microphone which leads to fluctuating input levels.
With Auto Dynamic function engaged, the de-essing intensity remains
constant at the value you set with the S-Reduction control. This is a great
help not only for inexperienced voice-over artists, but also in live situa-
tions.
Female
The Female switch is used to adapt to the voice characteristics:
When the switch is pressed, the Female mode is selected.
The automatic S-sound detection now reacts more intensively to
higher-frequency S-sounds. The unpressed switch position selects the
Male mode to adapt the S-sound detection to male voice characteristics.
Lower-frequency S-sounds are processed.
In addition, the mid frequency of the S-sound detection is increased from
Male mode to Female mode. For male voices the mid frequency is at about
6 kHz, for female voices at just under 7 kHz.
Nevertheless, you should not necessarily choose the Male position for
male voices and the Female position for females. Always listen to the pitch
and tone of the S-sound and try both positions.
On
The On switch, activates or deactivates the respective channel. This allows
you to quickly switch between processed and unprocessed signal.
To minimize switching noises, switching is performed directly aer the
balanced inputs and outputs. This relay hard bypass circuitry also provides
immediate redirection of inputs to outputs in the event of a power fault
on the primary or secondary side of the power supply, or if the device is
powered o.
EN
DE
Produktspecifikationer
| Varumärke: | SPL |
| Kategori: | Processor |
| Modell: | DeEsser Mk2 |
Behöver du hjälp?
Om du behöver hjälp med SPL DeEsser Mk2 ställ en fråga nedan och andra användare kommer att svara dig
Processor SPL Manualer
5 September 2025
5 September 2025
25 September 2024
25 September 2024
4 September 2024
3 September 2024
30 Augusti 2024
Processor Manualer
- RGBlink
- KanexPro
- Henry Engineering
- Mackie
- Noise Engineering
- Vivolink
- LD Systems
- Bogen
- Tascam
- Neutrik
- Allen-Heath
- Luminex
- SIIG
- Ashly
- CEDAR
Nyaste Processor Manualer
13 September 2025
13 September 2025
12 September 2025
9 September 2025
4 September 2025
4 September 2025
29 Augusti 2025
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025