Star Micronics TSP100IIU+ Bruksanvisning
Star Micronics
Skrivare
TSP100IIU+
Läs gratis den bruksanvisning för Star Micronics TSP100IIU+ (4 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11 recensioner. Har du en fråga om Star Micronics TSP100IIU+ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
What's Included
If contents are missing or damaged, please contact the reseller that sold you
the printer.
*accessories vary depending on the region where the printer was purchased.
All company and product names are trademarks or registered trademarks of their respective owners. (https://www.star-m.jp/eng/trademarks.html)
For more information please visit our FAQ site at: https://www.starmicronics.com/support/faq.aspx
Download the TSP100 Windows Driver “futurePRNT”.
Extract the futurePRNT software and run “Autorun.
exe”.
Follow the wizard and install the software.
Easy Setup Guide
TSP100IIU+
Install it before connecting a USB cable.
Installing the Windows driver
TSP100IIU+ online manual
This document explains the setup procedure for the TSP100IIU+.
For further instructions, please refer to the TSP100IIU+ online
manual.
Please read the instructions before using the printer.
Introduction
Please download the TSP100 futurePRNT Driver by
the following QR code or searching the web site.
Download the TSP100 futurePRNT Driver
The Windows drivers are included in futurePRNT.
When futurePRNT is used, the printer settings
can be configured and an operation test can be
performed.
TSP100IIU+
Paper Roll Guide
USB Cable
Easy Setup Guide
This Sheet
Safety InstructionsPower Cable*
Holder Plate
Rubber Feet Screws(2)Switch Cover
80878770
For customers using Windows Tablet・PC
< What to Do First >
TSP100IIU+ online manual
futurePRNT Driver
©2021 Star Micronics Co., Ltd.
3
Turn ON the Main Unit
Power
Connect the included power cable
to the inlet on the back side of the
TSP100IIU+
. Connect the plug of the
power cable to the outlet
.
Turn on the power to the TSP100IIU+
,
and check the blue LED lights up
.
2
Inserting a Paper Roll
When using a paper roll with 58
mm width, install the supplied
paper guide into the printer.
To change the paper width, the
memory switch must be set. Refer
to the online manual for details.
Insert a paper roll in the direction
shown in the illustration.
Pull the end of the paper out
straight
, and push down both
sides of the printer cover to close
.
This completes printer setup.
On Windows, the device driver software will
be installed automatically. Shortly thereafter,
your device will be ready to use.
3
4
I
O
FEED
ERROR
4
3
1
2
2
1
Windows
Android
Using the supplied USB cable, connect it to the port (Type-B)
and
secure it with the cable lock
. Connect the opposite end to the PC
.
Using your USB to Type-B cable, connect it to the USB port (Type-B)
and secure it with the cable lock
. Connect the opposite end to your
Android device
.
There are various plugs
for Android devices
You will need:
USB cable included with the printer
You will need:
USB cable (sold commercially or one
that comes with a tablet)
A specific USB On-the-Go adapter
may be required for your Android
product, please contact your tablet
manufacturer.
3
3
DK
DK
1
2
DK
DK
1
2
Plug for the printer
（Type-B)
Plug for the printer
（Type-B)
1
Connect a USB cable
Set Up the Printer
Push the cover opening lever
and then open the rear cover
.
Produktspecifikationer
| Varumärke: | Star Micronics |
| Kategori: | Skrivare |
| Modell: | TSP100IIU+ |
Behöver du hjälp?
Om du behöver hjälp med Star Micronics TSP100IIU+ ställ en fråga nedan och andra användare kommer att svara dig
Skrivare Star Micronics Manualer
9 September 2025
4 September 2025
3 September 2025
3 September 2025
11 Augusti 2025
25 September 2024
25 September 2024
9 September 2024
4 September 2024
3 September 2024
Skrivare Manualer
- Custom
- Colop
- Epson 7620
- Royal Sovereign
- Agfaphoto
- Metapace
- Sawgrass
- IDP
- Fargo
- Paxar
- Casio
- HP
- Kern
- Xerox
- Ultimaker
Nyaste Skrivare Manualer
18 September 2025
18 September 2025
17 September 2025
17 September 2025
17 September 2025
17 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025