StarTech.com EOC1110R Bruksanvisning

StarTech.com Wifi-repeater EOC1110R

Läs gratis den bruksanvisning för StarTech.com EOC1110R (2 sidor) i kategorin Wifi-repeater. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5 recensioner. Har du en fråga om StarTech.com EOC1110R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 09/27/2012

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 2 x Ethernet over Coax converter box (EOC1110K)

• 2 x Universal Power Adapter (NA/UK/EU) (EOC1110K)

• 1 x Coax to Ethernet Media Receiver (EOC1110R)

• 1 x Universal Power Adapter (NA/EU/UK) (EOC1110R)

• Instruction Manual

System Requirements

• 10/100/1000Mbps compatible Ethernet network/equipment

• Coaxial cabling (RG-59/6/7/11)

• Available AC power outlet at converter box locations

EOC1110K / EOC1110R

Gigabit Ethernet LAN Over Coaxial Extender Kit / Receiver - 2.4km

*actual product may vary from photos

Installation

Hardware Installation

NOTE: Both of the converter boxes in the EOC1110K kit are identical,

so they can be installed at either end, in any order.

1. At one of the locations for the converter box, connect an RJ45

Ethernet cable from the existing Ethernet network or computer

network adapter to the “LAN” port on the converter box.

2. Connect the coax cable to the “Link” F-Connector on the converter.

OPTIONAL: If also transmitting analog cable TV signals over the

coax line, connect the CATV F-Connector to a TV or TV receiver.

Digital cable TV signals are not supported.

3. Connect the included power adapter. The power LED should

light up solid. The LAN Link/Act LED should light up solid when

successfully connected to an Ethernet device on the “LAN” port.

4. Setup the other converter boxes by following the same Steps 1~4

5. Once both units are setup, they should be able to automatically

locate one another over the coax cabling. The Coax Link and Sync

LEDs should stay solid once communication is established. The

Coax Link LED will ash during communication.

6. The devices plugged into the “LAN” ports should now be able to

communicate with one another freely.

Driver Installation

No driver or software installation is required for these converters on

any connected computer systems.

Cable Lengths

Maximum bandwidth (Mbps) based on coaxial cable type and length.

Distance RF

Bandwidth RG-59 RG-6 RG-7 RG-11

100m ~ 700m

< 30MHz

144 144 144 144

800m 128 144 144 144

900m 112 144 144 144

1000m 96 128 144 144

1100m 80 128 144 144

1200m 64 112 128 144

1300m 80 128 144

1400m 80 128 144

1500m 64 112 144

1600m 96 128

1700m 80 128

1800m 80 128

1900m 64 112

2000m 112

2100m 96

2200m 80

2300m 80

2400m 64

Produktspecifikationer

Varumärke:	StarTech.com
Kategori:	Wifi-repeater
Modell:	EOC1110R
Vikt:	140 g
Bredd:	300 mm
Djup:	90 mm
Höjd:	90 mm
Förpackningens bredd:	189 mm
LED-indikatorer:	LAN, Power, Status
Modell:	Nätverksmottagare
Uteffekt:	1 A
Medeltid mellan fel (MTBF):	57000 h
Produktens färg:	Svart
bruksanvisning:	Ja
Låddjup:	234 mm
Vikt inkl. förpackning:	708 g
Strömförsörjning via Ethernet (PoE) stöd:	Nej
Antal LAN (RJ-45) anslutningar:	1
Strömförbrukning (vanlig):	4 W
Temperatur vid drift:	0 - 50 ° C
Temperaturintervall (förvaring):	-10 - 70 ° C
Intervall för relativ operativ luftfuktighet:	10 - 90 %
Utgångsspänning:	12 V
AC-inspänning:	110-240 V
Kommunikationsstandarder:	IEEE 802.3ab
Faktisk dataöverföringshastighet:	112 Mbit/s
Maximal överföringshastighet avstånd:	2400 m