StarTech.com P2AD122-KVM-SWITCH Bruksanvisning
StarTech.com
brytare
P2AD122-KVM-SWITCH
Läs gratis den bruksanvisning för StarTech.com P2AD122-KVM-SWITCH (1 sidor) i kategorin brytare. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10 recensioner. Har du en fråga om StarTech.com P2AD122-KVM-SWITCH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: January 29, 2025
2-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub - EDID Emulation
Product IDs
P2AD122-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2AD122-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey
command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
- Numbers entered during the hotkey sequence cannot be entered using a number pad
HK_LCode
Option 1
• Scr Lck + Scr Lck
Option 2
• Left Ctrl + Left Ctrl
Option 3
• Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift
Hotkey Command Function
HK_LCode 1 ~ 2 + • Select PC 1 ~ PC 2
HK_LCode F1 + • Start Auto Scan
HK_LCode F2 +
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
• Adjust Scan Rate - KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected PC
when switching (1 beep)
• Bound = PC Audio matches the selected PC (2 beeps)
HK_LCode + A
• Force Audio to follow selected PC
• If audio was unbound, this command will rebind
audio to switch with the PC ports
HK_LCode + Alt (Hold)
+ Right Ctrl + Release
Alt
• Change leading hotkey to Left Ctrl + Left Ctrl
Right Ctrl + Right Ctrl
HK_LCode + Alt (Hold)
+ Left Ctrl + Release
Alt
• Change leading hotkey to Right Ctrl + Right Ctrl
Left Ctrl + Left Ctrl
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | brytare |
| Modell: | P2AD122-KVM-SWITCH |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com P2AD122-KVM-SWITCH ställ en fråga nedan och andra användare kommer att svara dig
brytare StarTech.com Manualer
15 September 2025
12 September 2025
12 September 2025
11 September 2025
9 September 2025
9 September 2025
brytare Manualer
- Vemer
- Atlona
- Lancom
- Digitus
- CYP
- Alfatron
- Swisson
- Cudy
- Russound
- EBERLE
- Monacor
- Belkin
- Mueller
- Hikvision
- Eaton
Nyaste brytare Manualer
19 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
5 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
3 Oktober 2025