StarTech.com P4AD122-KVM-SWITCH Bruksanvisning
StarTech.com
Växla
P4AD122-KVM-SWITCH
Läs gratis den bruksanvisning för StarTech.com P4AD122-KVM-SWITCH (1 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9.5 recensioner. Har du en fråga om StarTech.com P4AD122-KVM-SWITCH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: November 15, 2023
4-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub
Product IDs
P4AD122-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P4AD122-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey
command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
- Numbers entered during the hotkey sequence cannot be entered using a number pad
HK_LCode
Option 1
• Scr Lck + Scr Lck
Option 2
• Left Ctrl + Left Ctrl
Option 3
• Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift
Hotkey Command Function
HK_LCode 1 ~ 4 + • Select PC 1 ~ PC 4
HK_LCode F1 +
or
Press Port Selection
Buttons 3 & 4
• Start Auto Scan
HK_LCode F2 +
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
or
Press Port Selection
Buttons 1 & 2
• Adjust Scan Rate -- KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected PC
when switching (1 beep)
• Bound = PC Audio matches the selected PC (2 beeps)
HK_LCode + A
• Force Audio to follow selected PC
• If audio was unbound, this command will rebind
audio to switch with the PC ports
Left Shift (Hold) +
Num Lck + Num Lck
+ Release Shift + Left
Ctrl
• Enable or disable hotkey functionality
• Enabled by default
Produktspecifikationer
| Varumärke: | StarTech.com |
| Kategori: | Växla |
| Modell: | P4AD122-KVM-SWITCH |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com P4AD122-KVM-SWITCH ställ en fråga nedan och andra användare kommer att svara dig
Växla StarTech.com Manualer
30 December 2025
30 December 2025
30 December 2025
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
16 December 2024
16 December 2024
Växla Manualer
- Ebara
- DEHN
- Elro
- Avocent
- Crestron
- Roline
- Theben
- Vivanco
- Trendnet
- Vacmaster
- Adder
- SIIG
- Kopp
- Bosch
- Vemer
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025